Characteristics of tiger nut milk: effects of milling

A standard method for the extraction of tiger nut milk has been introduced. It has been shown that, although milling duration improves the yield of tiger nut milk solids and its nutrient composition, there is a quantifiable loss of nutrient in the pressing residue during milk extraction. Milling duration improved the colloidal stability of the milk against creaming during 16 h of storage. A higher milling intensity resulted in the aggregation of biological polymers which resulted in colloidal destabilisation. Milling improved the lightness and stability and reduced browning rate of the tiger nut milk during storage. This report is important for the production of tiger nut milk of consistent and comparable characteristics. Milling has been introduced as a processing method for the qualitative and quantitative modulation of the properties of tiger nut milk. It is recommended to develop further strategies to improve the colloidal stability of tiger nut milk as a beverage.     

Single mask fabrication process for movable MEMS devices

The current work reports on the realization of movable micromachining devices using self-aligned single-mask fabrication process. Only dry etching process utilizing inductively coupled plasma reactive ion etching was used to release 3D micro structures from single crystal silicon substrate. No wet etching process is required to release the structures as is the case with silicon on insulator (SOI) wafers. Also the developed process does not require an SOI substrate and accordingly dispensing with the application of a wet etching step, thus yielding uniform structures without stiction. The optimized process was applied to realize thermally actuated microgrippers. The article presents the development of the fabrication process and demonstrates the operation of the fabricated device. The optimized process provides an avenue for low cost fabrication of movable micromachining devices without the use of complicated wet etching steps typically associated with SOI substrates.     

Silhouette-based human action recognition using SAX-Shapes

Human action recognition is an important problem in Computer Vision. Although most of the existing solutions provide good accuracy results, the methods are often overly complex and computationally expensive, hindering practical applications. In this regard, we introduce the combination of time-series representation for the silhouette and Symbolic Aggregate approXimation (SAX), which we refer to as SAX-Shapes, to address the problem of human action recognition. Given an action sequence, the extracted silhouettes of an actor from every frame are transformed into time series. Each of these time series is then efficiently converted into the symbolic vector: SAX. The set of all these SAX vectors (SAX-Shape) represents the action. We propose a rotation invariant distance function to be used by a random forest algorithm to perform the human action recognition. Requiring only silhouettes of actors, the proposed method is validated on two public datasets. It has an accuracy comparable to the related works and it performs well even in varying rotation.     

A cross-layer approach for partition detection at overlay layer for structured P2P in MANETs

Due to limited radio range and mobility of nodes in mobile ad hoc networks (MANETs), the network partitioning and merging could occur frequently. When structured peer-to-peer (P2P) overlays are running over MANETs, then network partition in the physical network can also cause network partition at the overlay layer. Existing approaches for structured P2P overlay over MANETs do not detect network partition at the overlay layer. This paper proposes a cross-layer approach to detect network partition at the overlay layer for structured P2P overlay over MANETs. Simulation results show that the proposed approach is highly effective and efficient in terms of routing overhead, success ratio and false-negative ratio.     

Is team training in briefings for surgical teams feasible in simulation?

We developed a module for surgical team training using briefings in simulated crisis scenarios and here we report preliminary findings. Nine surgical teams (34 trainees) participated in a pre-training simulation, followed by an interactive workshop on briefing and checklists, and then a post-training simulation. Both technical and non-technical skills were assessed via observation during simulations by expert trainers who provided feedback on performances at the end of simulation. Trainees also reported their attitudes to briefings and evaluated the training. Pre-training attitudes to briefing were positive, some of which improved post-training and trainees’ evaluation of the training was positive. Surgeons’ technical skill improved significantly post-training, but their decision-making skill was rated lower than other non-technical skills, compared to other trainees. The training did not appear to greatly improve non-technical skill performance. Training surgical teams in simulation is feasible but much more work is needed on measurement development and training strategy to confirm its efficacy and utility.     

Antimicrobial resistant genes associated with Salmonella from retail meats and street foods

We examined the antimicrobial resistance of Salmonella isolates from 300 meat products (raw beef, chicken meat and street foods). A total of 88 non-duplicate Salmonella from 66 (22.0%) retail meat and 22 (7.5%) street food samples were recovered and 11 serovars were identified. Among the 88 Salmonella isolates, the highest resistance was to tetracycline (73.8%), followed by sulfonamide (63.6%), streptomycin (57.9%), nalidixic acid (44.3%), trimethoprim–sulfamethoxazole (19.3%), ampicillin (17.0%), chloramphenicol (10.2%), cephalotin (8.0%), kanamycin (6.8%), ciprofloxacin (2.2%) gentamycin (2.2%), cefoxitin (2.2%), amoxicillin–clavulanate (1.0%) and amikacin (1.0%). Sixty-seven percent of the isolates (59/88) were multidrug resistant (MDR). Ten out of 17 resistance genes (bla_TEM-1, strA, strB, aadA, sulI, sulII, tetA, tetB, floR, cmlA) were detected. Twelve of the 59 MDR Salmonella isolates from serovars Typhimurium (6), Newport (3), Agona (1), Albany (1) and Weltevreden (1) had class 1 integrons. The gene cassettes identified were dfrA1, dfrV, dfrA12, aadA2, sul1 genes and an open reading frame orfC of unknown function. Four integron-positive isolates could transfer resistance phenotypes to the recipient strain, E. coli J53 via conjugation. These data revealed that the Salmonella isolates recovered from the retail meats and cooked street foods were resistant to multiple antimicrobials, which can be transmitted to humans through food products. The occurrence of mobile genetic elements such as integrons reiterates the roles of food of animal origins as a reservoir of MDR Salmonella.     

Silicone oil emulsions: strategies to improve their stability and applications in hair care products

Silicone oils have wide range of applications in personal care products due to their unique properties of high lubricity, non‐toxicity, excessive spreading and film formation. They are usually employed in the form of emulsions due to their inert nature. Until now, different conventional emulsification techniques have been developed and applied to prepare silicone oil emulsions. The size and uniformity of emulsions showed important influence on stability of droplets, which further affect the application performance. Therefore, various strategies were developed to improve the stability as well as application performance of silicone oil emulsions. In this review, we highlight different factors influencing the stability of silicone oil emulsions and explain various strategies to overcome the stability problems. In addition, the silicone deposition on the surface of hair substrates and different approaches to increase their deposition are also discussed in detail.     

Graphene‐based ternary composites for supercapacitors

The research on electrode materials for supercapacitor application continues to evolve as the request of high‐energy storage system has increased globally due to the demand for energy consumption. Over the past decades, various types of carbon‐based materials have been employed as electrode materials for high‐performance supercapacitor application. Among them, graphene is 1 of the most widely used carbon‐based materials due to its excellent properties including high surface area and excellent conductivity. To exploit more of its interesting properties, graphene is tailored to produce graphene oxide and reduced graphene oxide to improve the dispersibility in water and easy to be incorporated with other materials to form binary composites or even ternary composites. Nowadays, ternary composites have attracted enormous interest as 2 materials (binary composites) cannot satisfy the requirement of the high‐performance supercapacitor. Thus, many approaches have been employed to fabricate ternary composites by combining 3 different types of electroactive materials for high‐performance supercapacitor application. This review focuses on the supercapacitive performance of graphene‐based ternary composites with different types of active materials, ie, conducting polymers, metal oxide, and other carbon‐based materials.