Dynamical modelling of an activated sludge system of a petrochemical plant operating at high temperatures.

The Mexican petrochemical industry, Morelos S.A. de C.V., is one of the biggest and more important petroleum industries in Mexico and Latin America. It has an activated sludge system to treat its wastewater flow, which is approximately 7,000 m3/d. The wastewater contains volatile organic carbon substances classified as toxics. The old surface aeration system was changed for fine bubble diffusers; however, one major drawback of the new aeration system is that the temperature in the bioreactor has increased due to the compression of the air, which at the compressor exit reaches 85 degrees C. This effect results in the temperature in the bioreactor attaining 32 degrees C during the fall, whereas in the spring and summer, the bioreactor temperature reaches higher values than 40 degrees C. The high temperatures reduce the microorganism activity and cause a higher volatilisation rate of volatile compounds, among other effects, which affect the performance of the biological treatment. This work was performed to obtain a better modelling of the wastewater treatment from the petrochemical industry. The model describes the effect of the temperature on the performance of the biological treatment. The model was obtained from tests that were carried out in laboratory reactors with 14 L capacity, which were operated at different temperatures (from 30 to 45 degrees C), with the same wastewater and conditions as the actual system.     

Time Decay of the Activity of the Reduction Reaction of NO by CO on a Pd/Al2O3 Catalyst

An experimental study is made of the time decay of activity of the CO–NO reaction on a Pd/Al₂O₃ looking at the effect on reaction order and apparent activation energy. The optimum kinetics parameters fitting the steady state data at moderate pressures are determined. The time decay curves are analyzed through various catalyst deactivation models.     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

Pitfalls of protein sequence analysis

Thirteen patients who developed restrictive subdeltoid adhesions after rotator cuff repair were identified. These patients underwent second-look arthroscopy and takedown of adhesions at an average of 37 weeks after their index surgery. Clinical findings include pain and restricted motion that does not yield to manipulation under anesthesia. Arthroscopic findings are subdeltoid adhesions and a chondral lesion (companion lesion) of the humeral head articular surface. Patients were reevaluated at 26 weeks after their release of adhesions. Prerelease and postrelease University of California, Los Angeles (UCLA) scores average 14.8 and 30.1, respectively. Prerelease and postrelease UCLA pain scores averaged 2.6 and 7.7, respectively. Prerelease and postrelease range of motion was as follows: Flexion, 141/158; abduction, 123/141; internal rotation, 47/69; and external rotation, 53/74. The authors have proposed a theory to explain the clinical and arthroscopic findings in this subgroup of patients who are dissatisfied after rotator cuff repair. A technique for and the results of release of the subdeltoid adhesions also are reported.     

Transmission line routing for reduced external field disturbance

When immersed in a disturbing electromagnetic field, electronic systems are subject to interference due to the energy injected by the external field into the system through the electronic units and, especially, through the transmission lines connecting units one another. The issue of reducing the unwanted energy injection through connecting transmission lines is addressed in this contribution from the point of view of the routing, i.e. of the disposition of the connecting lines that minimizes the injection. The problem is formulated as an optimization problem, dealt with by the simulated annealing minimization technique combined with an efficient way of computing the field coupling to the lines. Results are reported for various cases, and the relation between the characteristics of the interfering field and the efficiency of the reduction is discussed.     

Optimal configuration of Energy-Efficient Ethernet

The IEEE 802.3az standard provides a new low power mode that Ethernet network interfaces can use to save energy when there is no traffic to transmit. Simultaneously with the final standard approval, several algorithms were proposed to govern the physical interface state transition between the normal active mode and the new low power mode. In fact, the standard leaves this sleeping algorithm unspecified to spur competition among different vendors and achieve the greatest energy savings. In this paper, we try to bring some light to the most well known sleeping algorithms, providing mathematical models for the expected energy savings and the average packet delay inflicted on outgoing traffic. We will then use the models to derive optimum configuration parameters for them under given efficiency constraints.     

In Vitro Characterization of Human CD24hiCD38hi Regulatory B Cells Shows CD9 Is Not a Stable Breg Cell Marker

Regulatory B (Breg) cells are endowed with immune suppressive functions. Various human and murine Breg subtypes have been reported. While interleukin (IL)-10 intracellular staining remains the most reliable way to identify Breg cells, this technique hinders further essential functional studies. Recent findings suggest that CD9 is an effective surface marker of murine IL-10 competent Breg cells. However, the stability of CD9 and its relevance as a unique marker for human Breg cells, which have been widely characterized as CD24^hiCD38^hi, have not been investigated. Here, we demonstrate that CD9 expression is sensitive to in vitro B cell stimulations. CD9 expression could either be re-expressed or downregulated in purified CD9-negative B cells and CD9-positive B cells, respectively. We found no significant differences in the Breg differentiation capacity of the CD9-negative and CD9-positive B cells. Furthermore, CD9-positive B cells co-express CD40 and CD86, suggesting their nature as B cell activation or co-stimulatory molecules, rather than regulatory ones. Therefore, we report the relatively unstable CD9 as a distinct surface molecule, indicating the need for further research for a more reliable marker to purify human Breg cells.