Investigating the influence of the counter Si-cell on the optoelectronic performance of high-efficiency monolithically perovskites/silicon tandem cells under various optical sources

Nowadays, tandem structures have become a valuable competitor to conventional silicon solar cells, especially for perovskite over silicon, as metal halides surpassed Si with tunable bandgaps, high absorption coefficient, low deposition, and preparation costs. This led to a remarkable enhancement in the overall efficiency of the whole cell and its characteristics. Consequently, this expands the usage of photovoltaic technology in various fields of applications not only under conventional light source spectrum in outdoor areas, i.e., AM1.5G, but also under artificial light sources found indoors with broadband intensity values, such as Internet of things (IoTs) applications to name a few. We introduce a numerical model to analyze perovskite/Si tandem cells (PSSTCs) using both crystalline silicon (c-Si) and hydrogenated amorphous silicon (a-Si:H) experimentally validated as base cells. All proposed layers have been studied with J-V characteristics and energy band diagrams under AM1.5G by using SCAPS-1D software version 3.7.7. Thereupon, the proposed architectures were tested under various artificial lighting spectra. The proposed structures of Li4Ti5O12/CsPbCl3/MAPbBr3/CH3NH3PbI3/Si recorded a maximum power conversion efficiency (PCE) of 25.25% for c-Si and 17.02% for a-Si:H, with nearly 7% enhancement concerning the Si bare cell in both cases.     

Numerical investigations on dynamic performance of stiffened box steel bridge piers

The aim of this paper is to carry out extensive numerical investigations about the effect of various structural parameters on the dynamic performance of stiffened box steel bridge pier under a strong earthquake ground motion. The considered structural parameters are the local slenderness ratios of stiffener and stiffened wall as well as the global slenderness ratio of the pier. In the present study, all investigated piers are made of high tensile steel with high yield ratio. The non-linear time history analyses are carried out using in-house Finite Element Program DYNAPSS, recently developed by the first author. This program is verified by comparing its results with the results obtained by the general FE program. In this program, the geometrical nonlinearity is considered on the bases of Total Lagrangian formulation, while the non-linearity of structural steel material is considered through implementation of modified multisurface cyclic plasticity model by which real characteristics of high tensile steel material such as, Plateau, Massing type of Bauschinger??s effect, disappearing of Plateau and cyclic strain hardening, are accurately modeled. The results are closely examined in respect with the damage index criterion. From this study, it is found that the increase in slenderness ratios of stiffener does not only increase the damage index, but also may lead to the full collapse. Furthermore, the damage index increases with the increase of local slenderness ratio of stiffened wall and the global slenderness ratio. Also, it is found that when the loacal buckling is not the dominant eigen mode and the pier behave as a single degree of freedom, the natural period has destructive effects when it is close to predominant period of the earthquake. Finally, contour plots of damage index values are presented. These contour plots may be greatly useful for the design of stiffened box steel bridge piers, where, critical values of structural parameters corresponding to certain value of damage index could be determined.     

An advanced VHDL‐AMS PiN diode model: towards simulation‐based design of power converters

This paper focuses on the modeling of a power PiN diode. The focal point basis is the dependence on temperature. The PiN diode remains a difficult device to model mainly during switching transients. An advanced PiN diode temperature‐dependent model is developed and implemented in VHDL‐AMS. Heterogeneous simulation scheme including the circuit wiring parasitic components, the probe effects and the dependent diode models is successfully simulated using SIMPLORER simulator. Experimental data of several commercial PiN diodes are compared to simulation results at different temperature levels. A good rate of consistency is found. Copyright © 2014 John Wiley & Sons, Ltd.     

Numerical simulation of mixed convection flows in a square lid-driven cavity partially heated from below using nanofluid

The present numerical study deals with mixed convection in a square lid-driven cavity partially heated from below and filled with water-base nanofluid containing various volume fractions of Cu, Ag, Al₂O₃ and TiO₂. Finite difference method was employed to solve the dimensionless governing equations of the problem. The effects of governing parameters, namely, Reynolds number, solid volume fraction, different values of the heat source length and different locations of the heat source on the streamlines and isotherms contours as well as Nusselt number and average Nusselt number along the heat source were considered. The present results are validated by favorable comparisons with previously published results. The results of the problem are presented in graphical and tabular forms and discussed.     

Parameters extraction of PEMFC's model using manta rays foraging optimizer

In this article, a recently developed bio-inspired based manta rays foraging optimizer (MRFO) is attempted for reliable and accurate extraction of the model uncertain parameters of proton exchange membrane fuel cells (PEMFCs). The parameter estimation is formulated as a non-linear optimization problem subject to set of restrictions. The great development and tremendous revolution of computation heuristic-based algorithms are the impetus of the authors to apply the MRFO to solve this constrained optimization problem resulting in a precise PEMFC model. Three case studies of typical field PEMFC stacks namely Ballard type Mark V, NedStack type PS6, and Horizon type H-12. Various I to V datasets are demonstrated to appraise the performance of MRFO among other recent optimizers available in the literature. To be objective and for sake of quantifications, the best scores of minimum fitness values are 0.8533, 2.1360, and 0.0966 for the later said PEMFC stacks, correspondingly. At a later stage, production of various characteristics under varying operating conditions such as changeable cell temperature and regulating pressures are established using the generated best values of PEMFCs model. Further calculations of statistical indices are performed to validate the robustness of obtained results by the MRFO. Through comprehensive performance assessments, it can be confirmed that MRFO is very promising tool for the effective extraction of PEMFCs' model and suggested to be applied for solving other engineering problems.     

Technoeconomic study for the optimization of turbine size and wind farm layouts

A technoeconomic analysis and optimization of wind turbine size and layout are performed using WAsP software. A case study of a 100‐MW wind farm located in Egypt is considered. Wind atlas for Egypt was used as the input data of the WAsP software. Two turbine models of powers 52 and 80 MW are considered for this project. The wind turbine size and distributions are selected based on the technoeconomic optimization, namely minimum wake effect, maximum annual energy production (AEP) rate, optimum cash flow, and payback period. The future worth method is adopted in economic comparison between the two alternatives, and the cash flow diagram provided the payback period and future worth after the lifetime of the plant. The results showed that (1) the AEP dramatically decreases for a wind farm area less than 15 km²; (2) the turbine spacing, spacing‐to‐diameter ratio, and the setback distances decrease and the wind turbine density and wake losses increase with decreasing the wind turbines size; (3) the total net AEP using G52 is lower than that of using G80 by about 16%; (4) the technoeconomic analysis recommended using G80 as it has higher profit than those of G52 by about $20 million.     

AC conductivity and mechanism of conduction study of Ba0.2Sr1.8FeMoO6 double perovskite using impedance spectroscopy

Journal of Electroceramics - The barium-stronium double perovskite Ba0.2Sr1.8FeMoO6 compound have been synthesized by the sol - gel method and characterized by X-ray diffraction (XRD) technique....     

Capillary bending of Janus carbon nanotube micropillars

We present a scalable process for the fabrication of slanted carbon nanotube micropillar arrays by inclined metal deposition and capillary self-assembly. Local control of the micropillar angle from vertical to nearly horizontal is achieved, and is explained using a finite element model. These structures may be useful for microscale contacts and anisotropic smart surfaces.