A 6-year clinical assessment of electronic facial thermography

The authors briefly report their experience regarding the opportunities offered by the use of current ultrasound methods in carotid surgery. They describe: a system for the quantification of athcromasic plaque used to monitor non-operated patients over time; ultrasound methods used to analyse the carotid wall to establish whether it can be utilised as an index of vascular aggression in hypertension, diabetes and atherosclerosis; the use of transcranial Doppler; criteria for the definition of high risk plaque; the applications of eco-color Doppler. The paper also illustrates a new pathology identified by the authors, defined as primary intimal fibrous hyperplasia, and the evolution of the carotid wall after endarterectomy. The structural characteristics of primary hyperplasia can only be shown using ultrasound given that arteriography cannot distinguish it from atheromatic stenosis. After endarterectomy the carotid wall is subject to hematic and hemodynamic stimuli which determine the type of evolution of the wall itself. The authors therefore examine the myointimal reaction, myointimal hyperplasia, early restenosis and late restenosis as different facets of the same phenomenon.     

Sorption,diffusion, and swelling characteristics of sodium alginate and its blend membranes with poly(vinyl alcohol) in water–acetic acid mixtures

Sorption, diffusion, and swelling characteristics of sodium alginate and its blend membranes with poly(vinyl alcohol) were investigated for water–acetic acid mixtures by using a gravimetric method at 30, 40, and 50°C. The membranes were characterized by X‐ray diffraction and Fourier transform infrared techniques. Concentration‐independent diffusion coefficients were obtained by applying Fick's relationship before completion of equilibrium sorption. Permeation coefficients were calculated from sorption and diffusion coefficients. Concentration profiles of liquids were computed considering the sheet geometry for the membrane by solving Fick's equation under suitable boundary conditions. Arrhenius activation parameters were computed for the transport processes. Experimental results and calculated quantities were discussed to understand membrane–solvent interactions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1139–1150, 2004     

Studies on multilayer film coextrusion III. The rheology of blown film coextrusion

Multilayer blown film coextrusion was studied, both experimentally and theoretically. For the experimental study, an annular die with a feed-port system was designed and multilayer blown films were produced by rotating the inner mandrel with a one horsepower variable-speed drive at speeds from nearly 2 to 6 rpm, and by inflating the tubular molten film with air. The die has 16 feed slots and melt pressure transducers are mounted along the axial direction of the outer wall of the annular flow channel. The transducers were used to determine the pressure gradient in the annular flow channel, which then permitted determination of the reduction in pressure drop when different combinations of two polymer systems were coextruded. Polymers used for b own film coextrusion were: (1) low-density polyethylene with ethylene-vinyl acetate; (2) low-density polyethylene with high-density polyethylene; (3) low-density polyethylene with polypropylene; (4) high-density polyethylene with ethylene-vinyl acetate. For the theoretical study, stratified helical flow was analyzed using a power-law non-Newtonian model. A computational procedure was developed to predict the number of layers, layer thickness, and the volumetric flow rate as functions of certain processing variables (namely, the pressure drop in the die, and the angular speed of rotation of the inner mandrel of the die) and the rheological parameters of the individual polymers concerned. Comparison was made of the theoretical prediction of volumetric flow rate with experimental ones. Some representative results are presented of the theoretically predicted axial and angular velocity distributions, shear stress profiles, and shear rate profiles.     

AmbiKraf

This paper presents, AmbiKraf, a non-emissive fabric display that subtly animates patterns on common fabrics. We use thermochromic inks and peltier semiconductor elements to achieve this technology. With this technology we have produced numerous prototypes from animated wall paintings to pixilated fabric displays. The ability of this technology to subtly and ubiquitously change the color of the fabric itself has made us able to merge different fields and technologies with AmbiKraf. In addition, with an animated room divider screen, Ambikraf merged its technology with Japanese Byobu art to tighten the gap between traditional arts and contemporary technologies. Through this AmbiKraf Byobu art installation and other installations, we discuss the impact of this technology as a ubiquitous fabric display. With focus to improvements of some limitations of the existing system, we present our future vision that enables us to merge this technology into more applications fields thus making this technology a platform for ubiquitous interactions on our daily peripherals.     

Experimental analysis of functional stability of sagittal split ramus osteotomies secured by miniplates and position screws

PURPOSE: This study determined the relative functional stabilities of various miniplate systems and configurations used to stabilize sagittal split ramus osteotomies (SSROs) and compared them with conventional internal screw fixation. MATERIALS AND METHODS: The biomechanical model was a reproducible prototype of a mandible sagittal osteotomy with consistent material and geometric properties. After advancing the distal segment by 7 mm, each set of mandible analogs (1 set = 3 analogs) was fixed bilaterally by one of three miniplate systems applied in various configurations, and tested with and without a supplemental 2.4-mm bicortical screw applied in the retromolar region. Reduced analogs were placed in a straining frame, and simulated masticatory loads were applied alternatively to the mandibular first molars. Ensuing osteotomy site displacements were measured by transducers attached to a computer-based data acquisition program. A coordinate transformation procedure was used to convert the component displacements captured by the individual transducers into a common "instability factor" to reflect fixation stability for each construct and loading condition. Instability factors for the individual constructs were compared with each other and with those obtained from analogs reduced exclusively with 2.4-mm position screws. RESULTS: Osteotomies stabilized with a combination of miniplates and position screws were more stable than those stabilized exclusively with miniplates (P < .0001). Post-hoc comparisons of mean instability factors (Dunnet's method) showed the miniplate-position screw combinations to be more stable than the 2.4-mm position screw system used as standard (P < .05). Miniplate systems alone were the least stable of the test constructs, with differential rates of failure between the individual miniplate systems. CONCLUSIONS: Exclusive use of miniplate fixation may not provide the consistent stability necessary for early functional restoration after SSROs. The addition of a position screw in the retromolar region substantially enhances the fixation stability of miniplate systems. The use of miniplates with retromolar position screws offers both technical and stability advantages over conventional miniplate or internal screw fixation. The fixation stability of the miniplate-position screw combination is independent of the type of miniplate system used.     

Transformation of c-oriented nanowall network to a flat morphology in GaN films on c-plane sapphire

The work significantly optimizes growth parameters for nanostructured and flat GaN film in the 480–830 °C temperature range. The growth of ordered, high quality GaN nanowall hexagonal honeycomb like network on c-plane sapphire under nitrogen rich (N/Ga ratio of 100) conditions at temperatures below 700 °C is demonstrated. The walls are c-oriented wurtzite structures 200 nm wide at base and taper to 10 nm at apex, manifesting electron confinement effects to tune optoelectronic properties. For substrate temperatures above 700 °C the nanowalls thicken to a flat morphology with a dislocation density of 10¹⁰/cm². The role of misfit dislocations in the GaN overlayer evolution is discussed in terms of growth kinetics being influenced by adatom diffusion, interactions and bonding at different temperatures. The GaN films are characterized by reflection high energy electron diffraction (RHEED), field emission scanning electron (FESEM), high resolution X-ray diffraction (HRXRD) and cathodoluminescence (CL).     

On the Effect of Birefringence on Light Transmission in Polycrystalline Magnesium Fluoride

Light transmission in polycrystalline magnesium fluoride was studied as a function of the mean grain size at different wavelengths. The mean grain size was varied by annealing hot‐pressed billets in argon atmosphere at temperatures ranging from 600°C to 800°C for 1 h. The grain‐size and grain‐orientation distributions were characterized by electron back scatter diffraction. The scattering coefficients were calculated from the in‐line transmittance measured at various wavelengths. The scattering coefficient of polycrystalline magnesium fluoride increased linearly with the mean grain size and inversely with the square of the wavelength of light. It is shown that these trends are consistent with theoretical models based on both a limiting form of the Raleigh–Gans–Debye (RGD) theory of particle scattering and light retardation theories that take refractive index variations along the light path. Quantitative predictions of the theories are, however, subject to uncertainly due to the restrictive assumptions made in the theories and difficulties in representing the microstructure in the theoretical models. In particular, grain‐size distribution has a significant influence on the scattering coefficient calculated using particle scattering models.     

An Assessment of the Applicability of Particle Light Scattering Theories to Birefringent Polycrystalline Ceramics

The applicability of particle light scattering theories to light attenuation in birefringent polycrystalline ceramics was investigated by measuring light transmittance in a model two‐phase system. The system consisted of microspheres of silica dispersed in a solution of glycerol in water. The composition of the liquid medium was chosen to produce a mismatch between the refractive index of the particles (n_p) and of the medium (n_m) equal to the root mean square of the refractive index variation in polycrystalline magnesium fluoride. The variations of the scattering coefficients (γ) with volume fraction of silica microspheres for three different particle diameters (0.5, 1.0 and 1.5 μm) were compared with theoretical predictions based on scattering efficiency of single particles (K) and linear extrapolation to multiparticle dispersed systems. The measured scattering coefficients were significantly greater than the theoretical values for particle volume fractions greater than 0.2. These results suggest that application of particle scattering theories to a birefringent polycrystalline ceramic, an intrinsically high volume fraction system, is tenuous at best.