Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Multi-verse optimization algorithm- and salp swarm optimization algorithm-based optimization of multilevel inverters

Neural Computing and Applications - Renewable energy sources are installed into both distribution and transmission grids more and more with the introduction of smart grid concept. Hence, efficient...     

CFAR processing with switching exponential smoothers for nonhomogeneous environments

Conventional constant false alarm rate (CFAR) methods use a fixed number of cells to estimate the background variance. For homogeneous environments, it is desirable to increase the number of cells, at the cost of increased computation and memory requirements, in order to improve the estimation performance. For nonhomogeneous environments, it is desirable to use less number of cells in order to reduce the number of false alarms around the clutter edges. In this work, we present a solution with two exponential smoothers (first order IIR filters) having different time-constants to leverage the conflicting requirements of homogeneous and nonhomogeneous environments. The system is designed to use the filter having the large time-constant in homogeneous environments and to promptly switch to the filter having the small time constant once a clutter edge is encountered. The main advantages of proposed Switching IIR CFAR method are computational simplicity, small memory requirement (in comparison to windowing based methods) and its good performance in homogeneous environments (due to the large time-constant smoother) and rapid adaptation to clutter edges (due to the small time-constant smoother).     

A new ECG beat clustering method based on kernelized fuzzy c-means and hybrid ant colony optimization for continuous domains

The kernelized fuzzy c-means algorithm uses kernel methods to improve the clustering performance of the well known fuzzy c-means algorithm by mapping a given dataset into a higher dimensional space non-linearly. Thus, the newly obtained dataset is more likely to be linearly seprable. However, to further improve the clustering performance, an optimization method is required to overcome the drawbacks of the traditional algorithms such as, sensitivity to initialization, trapping into local minima and lack of prior knowledge for optimum paramaters of the kernel functions. In this paper, to overcome these drawbacks, a new clustering method based on kernelized fuzzy c-means algorithm and a recently proposed ant based optimization algorithm, hybrid ant colony optimization for continuous domains, is proposed. The proposed method is applied to a dataset which is obtained from MIT–BIH arrhythmia database. The dataset consists of six types of ECG beats including, Normal Beat (N), Premature Ventricular Contraction (PVC), Fusion of Ventricular and Normal Beat (F), Artrial Premature Beat (A), Right Bundle Branch Block Beat (R) and Fusion of Paced and Normal Beat (f). Four time domain features are extracted for each beat type and training and test sets are formed. After several experiments it is observed that the proposed method outperforms the traditional fuzzy c-means and kernelized fuzzy c-means algorithms.     

Electrical properties of monoazacrown ether-substituted phthalocyanines

D.c. conductivities of polycrystalline monoazacrown ether-substituted phthalocyanines (M=2H, Ni, Zn, Pb, Cu) and diphthalocyanine (M=Lu) are measured as Au-MPc-Au sandwiches to be of the order 10^–10–10^–12 S m^–1. Chemical doping with oxidants (e.g. NOBF₄) and enhancing the stacking of planar phthalocyanine moieties through the formation of alkali metal adducts with sodium and potassium ions leads to increase in conductivity of the order 10¹–10². The low conductivity and the diamagneticity of the bis(phthalocyaninato)-lutetium can be ascribed to the lack of radical nature in LuH(Pc)₂. For the a.c. conductivities, lead and lutetium complexes form a group with higher conductivities and the rest show lower conductivity. The conduction activation energies calculated from Arrhenius plots exhibit the lowest value (0.40 eV) for the lutetium compound.Part of this work was presented at NATO-ASI on Semiconductor Materials and Processing Technologies, Erice, Sicily, 1–13 July 1991.     

Modeling and solving mixed-model assembly line balancing problem with setups. Part I: A mixed integer linear programming model

This paper is the first one of the two papers entitled “modeling and solving mixed-model assembly line balancing problem with setups”, which has the aim of developing the mathematical programming formulation of the problem and solving it with a hybrid meta-heuristic approach. In this current part, a mixed-integer linear mathematical programming (MILP) model for mixed-model assembly line balancing problem with setups is developed. The proposed MILP model considers some particular features of the real world problems such as parallel workstations, zoning constraints, and sequence dependent setup times between tasks, which is an actual framework in assembly line balancing problems. The main endeavor of Part-I is to formulate the sequence dependent setup times between tasks in type-I mixed-model assembly line balancing problem. The proposed model considers the setups between the tasks of the same model and the setups because of the model switches in any workstation. The capability of our MILP is tested through a set of computational experiments. Part-II tackles the problem with a multiple colony hybrid bees algorithm. A set of computational experiments is also carried out for the proposed approach in Part-II.     

Large-scale SRAM-based IP lookup architectures using compact trie search structures

SRAM-based pipelined architectures for high-speed IP lookup using Field Programmable Gate Arrays (FPGAs) has recently attracted a great deal of attention from researchers. Due to the limited amount of on-chip memory and the number of I/O pins of FPGAs, compact data structures providing high memory efficiency are in great demand.     

Interactive Evolutionary Multi-Objective Optimization Algorithm Using Cone Dominance

As the number of objectives increases, the performance of the Pareto dominance-based Evolutionary Multi-objective Optimization (EMO) algorithms such as NSGA-II, SPEA2 severely deteriorates due to the drastic increase in the Pareto-incomparable solutions. We propose a sorting method which classifies these incomparable solutions into several ordered classes by using the decision maker's (DM) preference information. This is accomplished by designing an interactive evolutionary algorithm and constructing convex cones. This method allows the DMs to drive the search process toward a preferred region of the Pareto optimal front. The performance of the proposed algorithm is assessed for two, three, and four-objective knapsack problems. The results demonstrate the algorithm's ability to converge to the most preferred point. The evaluation and comparison of the results indicate that the proposed approach gives better solutions than that of NSGA-II. In addition, the approach is more efficient compared to NSGA-II in terms of the number of generations required to reach the preferred point.     

Improvements of the structural,thermal, and mechanical properties of structural adhesive with functionalized boron nitride nanoparticles

Investigations on the production and development of nanoparticle-reinforced polymer materials have been attracted attention by researchers. Various nanoparticles have been used to improve the mechanical, chemical, thermal, and physical properties of polymer matrix composites. Boron compounds come to the fore to improve the mechanical and thermal properties of polymers. In this study, mechanical, thermal, and structural properties of structural adhesive have been examined by adding nano hexagonal boron nitride (h-BN) to epoxy matrix at different percentages (0.5, 1, 2, 3, 4, and 5%). For this purpose, nano h-BN particles were functionalized with 3-aminopropyltriethoxysilane (APTES) to disperse the h-BN nanoparticles homogeneously in epoxy matrix and to form a strong bond at the matrix interface. Two-component structural epoxy adhesive was modified by using functionalized h-BN nanoparticles. The structural and thermal properties of the modified adhesives were investigated by scanning electron microscopy and energy dispersion X-ray spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis techniques. Tensile test and dynamic mechanical analysis were performed to determine the mechanical properties of the adhesives. When the results obtained from analysis were examined, it was seen that the nano h-BN particles functionalized with APTES were homogeneously dispersed in the epoxy matrix and formed a strong bond. In addition that, it was concluded from the experimental results that the thermal and mechanical properties of adhesives were improved by adding functionalized nano h-BN particles into epoxy at different ratios.