Impact of crosstalk in an arrayed-waveguide multiplexer onN×N optical interconnection

The impact of crosstalk in an arrayed-waveguide N×N wavelength multiplexer is investigated precisely in relation to its application to wavelength-routing N×N all optical networks. In such systems multiple crosstalk light which has the same wavelength as the signal results in signal-crosstalk beat noise. We confirm that the noise is Gaussian and obtain the relation between crosstalk and power penalty. It is shown that the crosstalk must be less than -38 dB for a 16×16 system to keep the power penalty below 1 dB at a bit error rate of 10^-9     

Integrated-optic double-ring resonators with a wide free spectralrange of 100 GHz

Integrated-optic double-ring resonators with a wide free spectral range (FSR) of 100 GHz are fabricated using GeO₂-doped silica waveguides with a high relative refractive index difference (Δ) of 1.5%. The resonators are composed of two ring resonators comprising small ring waveguides with radii of 1.75 and 2.0 mm. The double-ring resonator module exhibited a wide FSR of 98.0 GHz, a finesse of higher than 138, a low crosstalk of less than -11.7 dB, and a low insertion loss of 6.1 dB. The measured FSR of 98.0 GHz is wider than any previously reported ring resonator composed of optical waveguides     

Addition of cisapride shortens colonoscopy preparation with lavage in elderly patients

The major envelope protein, p35, of vaccinia virus (VV; strain LIVP) was purified by extraction from virions with the non-ionic detergent Nonidet P-40. The protein was cleaved with CNBr. Four homogeneous peptides were isolated and their N-terminal amino-acid (aa) sequences determined. A computer search of a protein sequence databank revealed complete identity of the determined sequences with aa 44-63, 144-149, 154-165 and 224-238 of ORF H3 of the HindIII-H fragment of the VV genome [Rosel et al., J. Virol. 60 (1989) 436-446]. Earlier, Gordon et al. [Virology 167 (1988) 361-369] determined that the p35 surface protein of VV strain IHD-W is encoded by the H6 gene. Muravlev et al. [Biopolymery i kletka 6 (1990) 83-89 (Russian)] deduced from their data that gene A2 encodes this prominent antigen. Taking into account this ambiguity, we cloned the genes H3, H6 and A2 in expression vectors, prepared the specific antisera against the expression products and conducted the immunochemical analysis of the recombinant and native VV-specific proteins. It has been established that the H6 codes for an early protein that is found only in the infected cell extracts, but is absent in mature virions. The immunodominant protein p35 of VV strain LIVP is encoded by the gene H3. The gene A2 protein product is present mainly in the infected cell extract, but the antiserum against the A2 product shows a rather weak interaction with the 35-kDa fraction of structural VV proteins resolved by electrophoresis.     

New low-noise output amplifier for high-definition CCD image sensor

A new low-noise charge-coupled-device (CCD) output amplifier, the RJG detector, has been developed. The RJG detector incorporates a JFET which has an electrically floating ring-junction gate (RJG). The operating principle of the amplifier is that signal charges, transferred from the CCD into the RJG, directly modulate the drain current in the detection JFET. The performance of the detector was evaluated by operating test devices under a 37-MHz clock frequency, which is the same frequency as that for the horizontal CCD operation in the recently developed 2-million-pixel high-definition CCD image sensor. It was found that 1/f noise was reduced by introducing the JFET and that reset noise was completely eliminated by achieving complete charge transfer through the reset operation. As a result, input referred noise equivalent electrons within the 18.5-MHz baseband were reduced to 17 (electrons)     

Photostabilisation of colour formers for heat-sensitive recording systems: Effect of counter-ions on the photofading of fluoran dyes

Fluorans are given considerable attention as functional dyes for heat-and/or pressure-sensitive recording media. Numerous potential metal complexes were synthesised to prolong the life of coloured species. The protecting effect of these compounds against the photofading was examined on cellulose. It was found that the zinc or nickel salts of 3,5-dihydroxy-2-naphthoic acid and its derivatives can be applied as effective stabilisers against the fading of fluoran dyes.     

Inheritance of male hybrid sterility in the house musk shrew (Suncus murinus, Insectivora, Soricidae)

Two geographic races of the house musk shrew (Suncus murinus) were crossed and intercrossed in the laboratory. Many cases of male sterility were detected among the hybrids. Segregation analysis of the pedigree data showed that the inheritance of male sterility in interracial hybrids of S. murinus can be described within the framework of monogene polyallele model with sterility of a single allele combination. This model is similar if not identical to that proposed by Dobzhansky and Muller.     

Properties of indium oxide/tin oxide multilayered films prepared by ion-beam sputtering

The preparation and characterization of indium oxide (InO _x )/tin oxide (SnO _y ) multilayered films deposited by ion-beam sputtering are described and compared with indium tin oxide (ITO) films. The structure and the optoelectrical properties of the films are studied in relation to the layered structures and the post-deposition annealing. Low-angle X-ray diffraction analysis showed that most films retained the regular layered structures even after annealing at 500° C for 16 h. As an example, we obtained a resistivity of 6×10^–4 cm and a transparency of about 85% in the visible range at a thickness of 110 nm in a multilayered film of InO _x (2.0 nm)/SnO _y (0.2 nm)×50 pairs when annealed at 300° C for 0.5 h in air. Hall coefficient measurements showed that this film had a mobility of 17 cm² V^–1 sec^–1 and a carrier concentration (electron density) of 5×10²⁰ cm^–3.     

Numerical solutions of the singular integral equations in the crack analysis using the body force method

In this paper, numerical solutions of the singular integral equations of the body force method in the crack problems are discussed. The stress fields induced by two kinds of displacement discontinuity are used as fundamental solutions. Then, the problem is formulated as a hypersingular integral equation with the singularity of the form r ². In the numerical calculation, two kinds of unknown functions are approximated by the products of the fundamental density function and the Chebyshev polynomials. As examples, the stress intensity factors of the oblique edge crack, kinked crack, branched crack and zig-zag crack are analyzed. The calculation shows that the present method gives accurate results even for the extremely oblique edge crack and kinked crack with extremely short bend which has been difficult to analyze by the previous method using the approximation by the products of the fundamental density function and the stepped functions etc.     

Properties of Va metal-B films prepared by r.f.-sputtering

Ta_100-x B _x alloy films were prepared by r.f.-sputtering in the chemical composition range 45 x 77. Ta_100-x B _x (45 x 58) films consist of the amorphous phase, while the TaB₂ crystal phase was observed in Ta_100-x B _x (66 x 77) films. A remarkable preferred orientation with the (001) plane of TaB₂ parallel to the film surface was observed in Ta₃₄B₆₆. The d.c. electrical conductivity of Ta_100-x B _x (45 x 77) films decreases with increasing boron content in the range 6.7 × 10³ to 1.3 × 10^3–1 cm^–1. The micro-Vickers hardness of Ta_100-x B _x (45 x 77) films was in the range 2200 to 2600 kg mm^–2.