Abrasion phenomena in twill tencel fabric

The abrasion characteristics of Tencel fabrics were evaluated by Martindale abrasion and laundering, and the breakdown mechanism of fibers was surveyed by scanning electron microscopy. The fabric was subjected to pad‐dry‐cure treatment with two different types of modified dimethyloldihydroxyethylene urea resins (Reaktant DH and Reaktant FC). Although the degree of dry abrasion varied with different resins, the damage exhibited by individual fibers differed little from untreated to resin‐treated; the major mechanism of abrasion was through friction, and the mechanism of fiber failure was multiple splitting and transverse cracking. In untreated Tencel, the characteristic feature of wet abrasion was massive fibrillation, and in crosslinked fabrics, the wet abrasion mechanism was through fiber slippage and slicing action, although in the Reaktant FC‐treated fabric, the wet abrasion mechanism was more through slicing than through fiber splitting. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1391–1398, 2006     

The traditional Yemeni window and natural lighting

The traditional Yemeni window is considered to be one of the most important elements that characterize the yemeni architecture. The beauty of the traditional Yemeni window comes from its four main components which combined the functions of view, lighting, ventilation, protection, and privacy. These functions can be controlled by the occupants according to their social and environmental needs. The four main components are the lower part (Taqah), the fanlight (Qamariyah), the wooden external overhang (Konnah), and the small vent (Shaquos). Since fanlights provide natural lighting during day-time, the area of the lower part can be reduced and its exterior shutters can be closed without the need for artificial lighting. The internal natural lighting that is provided by the upper and lower parts of the window was investigated to see its quality. In this investigation, there were two main goals. The first is the contribution and quality of the internal light provided by the Qamariyah when shutters are closed. The second is the effect of the internal simple white cloth curtains, in the lower part, in the internal light quality. Visual measurements were taken in a typical room of a traditional house of the Old City of Sana'a, Yemen. From the findings, it was found that the fanlights (Qamariyat) provide low and soft homogeneous internal lighting which was as low as 22 lux average. However, the occupants have the ability to increase level of lighting to as high as 600 or 700 lux. This can be done simply by deciding which shutter to open and how many of them to be opened. In this paper, the methodology and findings will be presented and discussed.     

Effect of doping polyacrylic acid with some dopants as studied by different techniques

The molecular weight of polyacrylic acid (PAA) was determined by a viscometric method using NaNO₃ as solvent at 30°C. The specific electric conductivities (σ) of PAA as well as PAA doped with carbon black (CB), chromium oxide (Cr₂O₃), and cupferron with different concentrations (from 0.25 to 1 wt %) were measured at a temperature range 360–400 K. IR spectra of some polymers were determined and it was shown that when PAA was doped with 0.5 wt % CB, a C? O? C band appeared at 775–875 cm^?1. The positron annihilation lifetime (PAL) spectra in PAA doped with the above‐mentioned dopants were measured as a function of their concentrations. It was observed that the short lifetime intensity I₁ decreased, whereas the intermediate lifetime intensity I₂, which is related to the conductivity of the material, increased with increasing the wt % of Cr₂O₃ and cupferron as well as at low concentrations of CB. These results are discussed in terms of the conducting island model. It was found that there were distinct positive relationships between σ and I₂. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 877–883, 2002; DOI 10.1002/app.10381     

Functional and sensory properties of chicken meat from spent-hen carcasses deboned manually or mechanically in Jordan

Samples of chicken meat from spent laying hens were obtained by four different methods: (1) manual deboning of whole carcasses; (2) manual deboning of skinned carcasses; (3) mechanical deboning of whole carcasses; and (4) mechanical deboning of skinned carcasses. The meat was packaged, frozen and stored at ?18 °C for up to 3 months. Functional properties studied were pH, emulsifying capacity (EC) and water‐holding capacity (WHC) and, in addition, pigment concentration was investigated. Sensory properties included aroma, colour, texture and overall acceptability, as judged by a trained panel using a nine‐point hedonic scale. Removal of the skin prior to deboning by either method gave significantly higher values (P < 0.05) for EC, while WHC values were not significantly different among the experimental treatments, despite higher pH values for mechanically‐deboned meat, with and without skin. Pigment concentrations were highest in meat from Treatment 4 and lowest for Treatment 1, but values for both methods of deboning were affected by the presence of skin. There were no significant differences between treatments for any of the sensory properties studied. Changes occurring in the meat during frozen storage are described.     

Bandwidth Adaptive Cache Coherence Optimizations for Chip Multiprocessors

Chip Multiprocessors (CMPs) have different technological parameters and physical constraints than earlier multi-processor systems, which should be taken into consideration when designing cache coherence protocols. Also, contemporary cache coherence protocols use invalidate schemes that are known to generate a high number of coherence misses. This is especially true under producer-consumer sharing patterns that can become a performance bottleneck as the number of cores increases. This paper presents two mechanisms to design efficient and scalable cache coherence protocols for CMPs. First, we propose an adaptive hybrid protocol to reduce coherence misses observed in write-invalidate based protocols. The proposed protocol is based on a write-invalidate scheme. However, adaptively, it can push updates to potential consumers based on observed producer-consumer sharing patterns. Secondly, we extend this adaptive protocol with an interconnection resource aware mechanism. Experimental evaluations, conducted on a tiled-CMP via full-system simulation, were used to assess the performance from our proposed dynamic hybrid protocols. Performance analysis is presented on a set of scientific applications from the SPLASH-2 and NAS parallel benchmark suites. Results showed that the proposed mechanisms reduce cache-to-cache sharing misses up to 48 % and speed up application performance up to 34 %. In addition, the proposed interconnection resource aware mechanism is proven to perform well under varying interconnection utilizations.     

An investigation on wear behavior of UHMWPE/carbide composites at elevated temperatures

Ultra-high molecular weight polyethylene (UHMWPE) is extensively used in frictional applications due to its advanced wear resistance. This advanced polymer is reinforced with hard particulate fillers for further developments against wear conditions. Since elevated temperatures prevail in the service conditions, wear behavior of UHMWPE composites is an important issue for the engineering applications. In the present work, UHMWPE-based composites including silicon carbide (SiC) fillers were fabricated in a compression molding chamber. In the specimen preparation stage, molding pressure, filler amount, and filler particle size were varied to investigate the influence of these variables. Upon deciding the optimum parameters from the wear tests conducted at room temperature, the wear experiments were repeated for the optimum specimen at elevated temperatures, such as 40 and 60°C. According to the results, the wear behavior of the SiC/UHMWPE composites is heavily changed by the effect of elevated temperature. Adhesive effect is pronounced at elevated temperatures while the wear characteristics possess the abrasive effect in the sliding path. In addition, the composites exhibit an accelerated material loss as temperature increases during the frictional system.     

Improved phase performance for rotman lens

Rotman lenses are used to obtain multiple beams from a single array. Although the beams produced by the feed antennas at focal points have no path length errors, the beams produced by feed antennas at off focal points may have large path length errors. These path length errors cause deterioration in the multiple beams. In this article, two novel methods are introduced to obtain feed curves which reduce the path length errors of off focal feed points significantly, compared with the commonly used circular and elliptical feed curves. The first method obtains feed curve points based on having zero path length error at three chosen points of the radiating array for each beam direction. The second method uses the particle swarm optimization method for obtaining optimum feed points for each beam direction. The results show that there is a very significant drop in the level of the maximum path length errors (in the order of about 1:4). © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE 23: 634–638, 2013.