Finite-element grid improvement by minimization of stiffness matrix trace

A new and simple method of finite-element grid improvement is presented. The objective is to improve the accuracy of the analysis. The procedure is based on a minimization of the trace of the stiffness matrix. For a broad class of problems this minimization is seen to be equivalent to minimizing the potential energy. The method is illustrated with the classical tapered bar problem examined earlier by Prager and Masur. Identical results are obtained.     

Micromanipulation and cloning studies on buffalo oocytes and embryos using nucleus transfer

1. Nine male volunteers were exposed to the pyrethroid insecticide cyfluthrin. The study was performed in an exposure room, where an aerosol containing cyfluthrin was sprayed to obtain atmospheres with mean cyfluthrin concentrations of 160 and 40 micrograms/m3. Four volunteers were exposed for 10, 30 and 60 min at 160 micrograms/m3 and another five volunteers were exposed for 60 min at 40 micrograms/m3. For 160 micrograms/m3 exposure urine samples were collected before and immediately after exposure as well as for the periods 1-2, 2-3, 3-4, 4-5, 5-6, 6-12 and 12-24 h after exposure. For 40 micrograms/m3 exposure urine samples were collected before and 2 h after exposure. 2. The main urinary cyfluthrin metabolites, cis-/trans-3-(2,2-dichlorovinyl)-2,2-dimethylycyclopropane carboxylic acid (DCCA) and 4-fluoro-3-phenoxybenzoic acid (FPBA), were determined. The limit of detection (LOD) for all metabolites was 0.0025 microgram in an urine sample of 5 ml (0.5 microgram/l). After inhalative exposure of 40 micrograms cyfluthrin/m3 air for 60 min, the amount of metabolites in urine collected in the first 2 h after exposure was less than the LOD, namely 0.14 microgram for cis-DCCA, 0.15-0.28 microgram for trans-DCCA and 0.12-0.23 microgram for FPBA. 3. Of the metabolites, 93% was excreted within the first 24 h (peak excretion rates between 0.5 and 3 h) after inhalative exposure of 160 micrograms/m3. The mean half-lives were 6.9 h for cis-DCCA, 6.2 h for trans-DCCA and 5.3 h for FPBA. 4. The mean trans-:cis-DCCA ratio was 1.9 for the time course as well as for each subject. 5. The amount of metabolites in urine depends on the applied dose, on the exposure time and shows interindividual differences.     

印度水电方面的技术成就

大型水电工程需要大量的开挖隧洞，作者是负责印度国家水电公司（NHPC）所属的Tessta Ⅱ级水电工程的总工程师，现对印度在水电开发中的最新隧洞开挖工程做了一个展望。     

Component fatty acids of Cladosporium herbarum fat

Cladosporium herbarum grown as a surface culture in a chemically defined medium of sucrose and inorganic salts gave a high yield of fat (29.2%). The component acids of this fat have been found to be palmitic (34.2%); oleic (15.9%); linoleic (34.2%) and linolenic (15.7%). The combined proportion of linoleic and linolenic acids being about 50 per cent, the fat will be of great value for the manufacture of oil-modified resins as the films produced by such resins do not become yellow with age.     

Grounded discovery of symbols as concept–language pairs

In human designer usage, symbols have a rich semantics, grounded on experience, which permits flexible usage — e.g. design ideation is improved by meanings triggered by contrastive words. In computational usage however, symbols are syntactic tokens whose semantics is mostly left to the implementation, resulting in brittle failures in many knowledge-based systems. Here we ask if one may define symbols in computational design as {label,meaning} pairs, as opposed to merely the label. We consider three questions that must be answered to bootstrap a symbol learning process: (a) which concepts are most relevant in a given domain, (b) how to define the semantics of such symbols, and (c) how to learn labels for these so as to form a grounded symbol. We propose that relevant symbols may be discovered by learning patterns of functional viability. The stable patterns are information-conserving codes, also called chunks in cognitive science, which relate to the process of acquiring expertise in humans. Regions of a design space that contain functionally superior designs can be mapped to a lower-dimensional manifold; the inter-relations of the design variables discovered thus constitute the chunks. Using these as the initial semantics for symbols, we show how the system can acquire labels for them by communicating with human designers. We demonstrate the first steps in this process in our baby designer approach, by learning two early grounded symbols, tight and loose.     

THZ531 Induces a State of BRCAness in Multiple Myeloma Cells: Synthetic Lethality with Combination Treatment of THZ 531 with DNA Repair Inhibitors

Multiple myeloma (MM) is a hematological disease marked by abnormal growth of B cells in bone marrow. Inherent chromosomal instability and DNA damage are major hallmarks of MM, which implicates an aberrant DNA repair mechanism. Studies have implicated a role for CDK12 in the control of expression of DNA damage response genes. In this study, we examined the effect of a small molecule inhibitor of CDK12–THZ531 on MM cells. Treatment of MM cells with THZ531 led to heightened cell death accompanied by an extensive effect on gene expression changes. In particular, we observed downregulation of genes involved in DNA repair pathways. With this insight, we extended our study to identify synthetic lethal mechanisms that could be exploited for the treatment of MM cells. Combination of THZ531 with either DNA-PK inhibitor (KU-0060648) or PARP inhibitor (Olaparib) led to synergistic cell death. In addition, combination treatment of THZ531 with Olaparib significantly reduced tumor burden in animal models. Our findings suggest that using a CDK12 inhibitor in combination with other DNA repair inhibitors may establish an effective therapeutic regimen to benefit myeloma patients.     

Experimental and simulation studies on the effect of suction opening orientation on solar vertical chimney

The zero energy building considered is a single storey building in Tiruchirappalli city retrofitted with various green features. This study investigated the effect of a suction opening orientation on a vertical solar chimney (VSC), integrated into a one-storey building. It was designed, manufactured and tested through selection of different suction openings for the entry of air, including right, left, front, back, both right and left and both front and back sides. Genetic algorithm (GA) calculates maximum air flow rate for a building with VSC for better suction opening, in Tiruchirappalli's dry, environmental conditions. GA is a useful technique for finding an improved suction opening specifically in the presence of a host of independent parameters which are large. The obtained results are related to fluid flow temperature distribution along the chimney, mass flow rate and air change per hour. The findings between the GA and the experimental results show sound agreement.     

Use of cellular confinement for improved railway performance on soft subgrades

Due to extensive right-of-way, railroads are inevitably subject to poor subgrade conditions and interrupted service for significant maintenance due to excessive deformations and loss of track geometry. Geocell confinement presents itself as a possible solution for improving performance of ballasted railroad embankments over weak subgrade. To investigate the efficacy of geocell confinement on ballasted railway embankments, a set of well-instrumented, large-scale cyclic plate loading tests and numerical simulations were performed on geocell-confined ballast overlaying a weak subgrade material. The agreement of results from tests and simulations served as a basis for simulating practical track geometry and performance for various geocell configurations and subgrades using three-dimensional (3D) finite element (FE) analyses. The study showed that geocell reinforcement significantly decreased track settlement, decreased subgrade deformations with lower and uniform distribution of vertical stresses on subgrade and inhibited lateral deformation and serviceability under cyclic loading. These results demonstrate that geocell confinement can be an effective alternative to subsurface improvement or shorter maintenance cycles, particularly on weak subgrades.