Effects of SO2 on selective catalytic reduction of NO with NH3 over a TiO2 photocatalyst

The effect of SO₂ gas was investigated on the activity of the photo-assisted selective catalytic reduction of nitrogen monoxide (NO) with ammonia (NH₃) over a TiO₂ photocatalyst in the presence of excess oxygen (photo-SCR). The introduction of SO₂ (300 ppm) greatly decreased the activity of the photo-SCR at 373 K. The increment of the reaction temperature enhanced the resistance to SO₂ gas, and at 553 K the conversion of NO was stable for at least 300 min of the reaction. X-ray diffraction, FTIR spectroscopy, thermogravimetry and differential thermal analysis, x-ray photoelectron spectroscopy (XPS), elemental analysis and N₂ adsorption measurement revealed that the ammonium sulfate species were generated after the reaction. There was a strong negative correlation between the deposition amount of the ammonium sulfate species and the specific surface area. Based on the above relationship, we concluded that the deposition of the ammonium sulfate species decreased the specific surface area by plugging the pore structure of the catalyst, and the decrease of the specific surface area resulted in the deactivation of the catalyst.     

Synthesis, Characterization, and Formation Process of Na-X Zeolite from Coal Fly Ash

Using the SiO₂ and Al₂O₃ components of the amorphous phase in coal fly ash (Fa), Fa was converted to Na-X zeolites in NaOH-NaAlO₂ solutions by stirring at 35°C for 72 hr and then aging at 85°C for a given period. The molar ratio SiO₂/Al₂O₃ of the starting materials was controlled from 2.0 to 13.2. The resulting materials were characterized by various means. Increasing the SiO₂/Al₂O₃ ratio of the starting material increased the degree of crystallinity of faujasite, exhibiting a maximum at SiO₂/Al₂O₃ = 8.0. The faujasite formed was identified as Na-X zeolite with Si/Al = 1.20. The amorphous phase in Fa was dissolved during the stirring to form a precursor of zeolite, such as amorphous aluminosilicate. The Na-X zeolite was formed by aging for 24 hr, and the degree of crystallinity of this material was increased with the increasing aging period. The cation exchange capacity and specific surface area were increased with the increasing degree of crystallinity of the Na-X zeolites.     

The integral experiment on beryllium with D-T neutrons for verification of tritium breeding

A clean benchmark experiment on beryllium was performed with D-T neutrons at the FNS facility of the Japan Atomic Energy Agency. The main objective was to verify the integral data related to the tritium production on lithium isotopes. Tritium production rates, as well as activation reaction rates were measured inside the beryllium assembly that was shaped as a pseudo-cylindrical slab with an area-equivalent diameter of 628 mm and a thickness of 355 mm. Experimental results were analyzed with a three-dimensional Monte Carlo transport code MCNP-4C and FENDL/MC-2.0, JENDL-3.2/3.3 neutron transport libraries. Evaluation of reaction rates was based on the cross section data taken from the JENDL Dosimetry File and ENDF B-VI data libraries. Analysis shows that all calculation combinations (transport and activation cross section libraries) used for evaluation of reaction rates give data that is agreeable with measured values within 10%.     

Determination of erythema-effective solar radiation in Japan and Germany with a spore monolayer film optimized for the detection of UVB and UVA--results of a field campaign

A centrifugation method was used to investigate the accumulation of 14C-rifampicin by Staphylococcus aureus and Escherichia coli, and to characterize the mechanism of rifampicin transport into S. aureus. For both species, drug accumulation was rapid with the steady-state concentration (SSC) reached within 40 s of drug exposure. Rifampicin accumulation by S. aureus was temperature and pH dependent; the lower the experimental temperature and the lower the experimental pH, the lower was the concentration of rifampicin accumulated. Accumulation was unaffected by the presence of inhibitors of antibiotic efflux, carbonyl cyanide m-chlorophenylhydrazone (CCCP), dinitrophenol (DNP), or reserpine. Exposure to increasing concentrations of rifampicin suggested that the accumulation process was saturable above a rifampicin concentration of 0.2 mg/L. Michaelis-Menten kinetics gave an apparent Km and Vmax for rifampicin, calculated from a Lineweaver-Burk plot, of 0.05 mg/L (0.06 microM) and 3.8 ng rifampicin per second, respectively. However, calculations suggest that these values reflect those for binding of rifampicin to its target, RNA polymerase.     

Some characteristics of a cellular receptor for virulent infectious bursal disease virus by using flow cytometry

A flow cytometric virus binding assay that directly visualizes the binding of infectious bursal disease virus (IBDV) to its target cells was established. The chicken B lymphoblastoid cell line, LSCC-BK3, which is permissive for IBDV infection, bound high levels of the virus. Another B lymphoblastoid cell line, LSCC-1104-B1, bound low levels of the virus, although it was nonpermissive. No virus binding was detected in nonpermissive T lymphoblastoid cell lines. In the binding assay to heterogeneous cell populations of chicken lymphocytes, IBDV (a highly virulent OKYM strain) bound to 94% cells in the lymphocytes prepared from the bursa of Fabricius, 37% cells in those prepared from the spleen, 3% cells in those prepared from the thymus, and 21% cells in those prepared from the blood. Most of the cells, which bound the virus, were surface immunoglobulin M (SIgM)-positive, but a small number of them were SIgM-negative. Additionally, the binding of IBDV to the LSCC-BK3 cells was affected by treatment of the cells with proteases and N-glycosylation inhibitors. These findings may indicate that the IBDV host range is mainly controlled by the presence of a virus receptor composed of N-glycosylated protein associated with the subtle differentiation stage of B-lymphocytes represented mostly by SIgM-bearing cells.     

Numerical simulation of parallel-plate particle separator for estimation of charge distribution of PM2.5

A numerical simulation of an instrument that is used to measure the charging state of PM2.5 is conducted in order to clarify its measurement uncertainty and to improve its performance. The instrument, a parallel-plate particle separator (PPPS), is designed to classify aerosol particles according to their charging states and measure their quantities. The trajectories of submicron particles in the PPPS are numerically analyzed using the Lagrangian particle tracking method, taking into account the Brownian force and the electrostatic force. First, it is confirmed that the deterioration in the classification accuracy observed in the experiment is due to Brownian diffusion. The optimal condition that improves the accuracy is investigated through a parametric study by varying the balance of flow rates at the inlets, the geometry of the inlet and exit sections, and the applied voltage. It is found that decreasing the flow rate of the central inlet for aerosol or narrowing the central inlet improves the accuracy. The dependence of the accuracy on the flow rate is found to be in accordance with the experimental results. For charged particles, an optimum voltage that maximizes the classification accuracy is found. On the basis of the simulation results, we propose a method to determine the charge distribution of aerosol from the number of particles counted at each exit of the PPPS. In the test assuming aerosol in the air, the charge distribution determined from the number count at the exits is found to perfectly agree with the charge distribution specified at the inlet.

Copyright © 2019 American Association for Aerosol Research     

Behavioral and electroantennogram responses of periplanone analogs

The biological activities of synthetic periplanone analogs, including four candidates of periplanone-A (P-A), were evaluated by behavioral and electroantennogram (EAG) assays. Among 16 periplanone analogs, six compounds evoked pheromonal activity from the male American cockroaches. The threshold dosages of these biological active analogs were 10–10⁵ times lower than that of the known periplanone mimic, germacrene-D. The conformation required for eliciting the pheromonal activity is discussed in terms of the structure-activity relationship of these analogs. Hauptmann's P-A elicited the strongest pheromonal activity among four candidates of P-A in our bioassay, suggesting that Hauptmann's P-A is a natural P-A produced from female cockroaches.     

Systematic analysis of glycosphingolipids in the human gastrointestinal tract: Enrichment of sulfatides with hydroxylated longer-chain fatty acids in the gastric and duodenal mucosa

The composition of the glycosphingolipids of the human gastrointestinal tract was studied. The major neutral glycosphingolipids were ceramide monohexosides (e.g., GalCer, GlcCer), LacCer, Gb₃Cer, Gb₄Cer and more polar ones with more than four sugars, whereas neither Gg₃Cer nor Gg₄Cer were present. The acidic glycosphingolipids consisted of sulfatides and gangliosides such as G_M3, G_M1, G_D3 and G_D1a. Also a large amount of sulfatides was found in the gastric mucosa and duodenum. The concentrations of sulfatides in the fundic mucosa, antral mucosa and duodenum amounted to 416.0, 933.8 and 682.9 nmol/g of dry weight, respectively, exceeding those in the gastric mucosa and kidney of other mammals. The major molecular species of the sulfatides were identified as I³SO₃-GalCer with hydroxylated longer-chain fatty acids based on the analyses by gas-liquid chromatography and negative ion fast-atom bombardment mass spectrometry. In contrast, gangliosides in these regions showed a tendency to be lower than sulfatides, and the molar ratios of sulfatides to gangliosides were about 2.0, whereas those in other parts were less than 0.5. A high content of sulfatides in the gastric and duodenal mucosa, where mucosa is easily insulted by acid, pepsin and bile salts, may be closely related to their roles in mucosal protection. The nomenclature used for gangliosides and other glycosphingolipids follows the system of Svennerholm (Ref. 1) and the recommendation of the IUPAC-IUB Commission (Ref. 2), respectively.     

Fractionation and enrichment of CLA isomers by selective esterification with Candida rugosa lipase

A commercial product of CLA contains almost equal amounts of cis-9,trans-11 (c9,t11)-CLA and trans-10,cis-12 (t10,c12)-CLA. We attempted to enrich the two isomers by a two-step selective esterification using Candida rugosa lipase that acted on c9,t11-CLA more strongly than on t10,c12-CLA. An FFA mixture containing CLA isomers was esterified with an equimolar amount of lauryl alcohol in a mixture of 20% water and the lipase. When the esterification of total FA reached 50%, two isomers were fractionated in a good yield: t10,c12-CLA was enriched in FFA, and c9,t11-CLA was recovered in lauryl esters. The FFA were esterified again to enrich t10,c12-CLA. At 27.3% esterification of total FA, the t10,c12-CLA content in FFA increased to 64.8 wt% with 89.3% recovery: The ratio of the content of t10,c12-CLA to that of two isomers was 95.9%. Lauryl esters obtained by the single esterification were employed for enrichment of c9,t11-CLA. After the esters were hydrolyzed, the resulting FFA were esterified again with lauryl alcohol. At 62.0% esterification of total FA, the c9,t11-CLA content in lauryl esters increased to 73.3 wt% with 79.4% recovery: The ratio of the content of c9,t11-CLA to that of two isomers was 95.6%. In a 600-g-scale purification, molecular distillation was effective in separating the reaction mixture into lauryl alcohol, FFA, and lauryl ester fractions.