Study of specific absorption rate (SAR) induced in two child head models and in adult heads using mobile phones

This paper gives a first comparison of specific absorption rate (SAR) induced in a child-sized (CS) head and an adult head using a dual-band mobile phone. In the second study, the visible human head is considered and comparison of SAR induced in a CS or child-like (CL) head and an adult head using a dual-band mobile phone is given. All the peaks of average SAR over a mass of 10 and 1 g in the head and the power budget are determined in the two comparisons using the finite-difference time-domain method. The differences between the results for adult and CS or CL heads are given at 900 and 1800 MHz. No important differences are noted for the peak SAR averaged over 10 g (SAR10 g), between the two adult head models, as well as between the two child head models. The peak SAR10 g in the brain of the CS or CL head is slightly more significant than that for the adult one.     

Total and Fractional Performance of Granular Dust Traps in Refractory Production

Methods are proposed for designing interpolation models for the preliminary determination and subsequent forecasting of general and fractional breakthrough coefficients for dust used with granular filters, as employed in energy-saving and high-performance dust trapping from technological gases and ventilation discharges in refractory production. The models are supplied with nomograms, which makes them widely suitable for experts working in environmental protection at refractory-producing organizations. The main factors are identified that influence the performance. The results are of interest to experts in related areas of industry such as building materials and engineering ceramics and so on. Translated from Novye Ogneupory, No. 4, pp. 64–67, April, 2008.     

Prediction and quality control of the melt index during production of high-density polyethylene

In polyolefin processes the melt index (MI) is the most important control variable indicating product quality. Because of the difficulty in the on-line measurement of MI, a lot of MI estimation and correlation methods have been proposed. In this work a new dynamic MI estimation scheme is developed based on system identification techniques. The empirical MI estimation equation proposed in the present study is derived from the 1 ^st -order dynamic models. Effectiveness of the present estimation scheme was illustrated by numerical simulations based on plant operation data including grade change operations in high density polyethylene (HDPE) processes. From the comparisons with other estimation methods it was found that the proposed estimation scheme showed better performance in MI predictions. The virtual sensor model developed based on the estimation scheme was combined with the virtual on-line analyzer (VOA) to give a quality control system to be implemented in the actual HDPE plant. From the application of the present control system, significant reduction of transition time and the amount of off-spec during grade changes was achieved     

Construction Robot Path-Planning for Earthwork Operations

In developing an intelligent mobile construction robot, a navigation system that can provide an effective and efficient path-planning algorithm is a very important element. The purpose of a path-planning method for a mobile construction robot is to find a continuous collision-free path from the initial position of the construction robot to its target position. This paper presents an improved Bug-based algorithm, called SensBug, which can produce an effective path in an unknown environment with both stationary and movable obstacles. The contributions, which make it possible to generate an effective and short path, are an improved method to select local directions, a reverse mode, and a simple leaving condition. Some emerging technologies that can be used for implementing an intelligent construction robot are introduced in this paper.     

A 0.25-/spl mu/m CMOS quad-band GSM RF transceiver using an efficient LO frequency plan

This paper describes a single-chip CMOS quad-band (850/900/1800/1900 MHz) RF transceiver for GSM/GPRS applications. It is the most important design issue to maximize resource sharing and reuse in designing the multiband transceivers. In particular, reducing the number of voltage-controlled oscillators (VCOs) required for local oscillator (LO) frequency generation is very important because the VCO and phase-locked loop (PLL) circuits occupy a relatively large area. We propose a quad-band GSM transceiver architecture that employs a direct conversion receiver and an offset PLL transmitter, which requires only one VCO/PLL to generate LO signals by using an efficient LO frequency plan. In the receive path, four separate LNAs are used for each band, and two down-conversion mixers are used, one for the low bands (850/900 MHz) and the other for the high bands (1800/1900 MHz). A receiver baseband circuit is shared for all four bands because all of their channel spaces are the same. In the transmit path, most of the building blocks of the offset PLL, including a TX VCO and IF filters, are integrated. The quad-band GSM transceiver that was implemented in 0.25-/spl mu/m CMOS technology has a size of 3.3/spl times/3.2 mm/sup 2/, including its pad area. From the experimental results, we found that the receiver provides a maximum noise figure of 2.9 dB and a minimum IIP3 of -13.2dBm for the EGSM 900 band. The transmitter shows an rms phase error of 1.4/spl deg/ and meets the GSM spectral mask specification. The prototype chip consumes 56 and 58 mA at 2.8 V in the RX and TX modes, respectively.     

Optical imaging of anatomical maps derived from magnetic resonanceimages using time-independent optical sources

Presents a model suitable for computing images of absorption cross sections of thick tissue structures illuminated at near infrared (NIR) wavelengths from tomographic projection data. Image reconstruction is accomplished by solving a system of linear equations derived from transport theory. Reconstruction results using different algebraic solvers are shown for anatomical maps of the breast, derived from magnetic resonance imaging data, containing two simulated pathologies, in which case qualitatively good reconstructions were obtained. Evaluation of magnetic resonance (MR) data to optimize NIR optical tomographic imaging methods and to assess the feasibility of a combined MR-optical measurement scheme is discussed     

新型复合弹簧的研究

提出一种金属圆锥弹簧与橡胶圆锥弹簧复合而成的弹簧．分析表明：它可以应用于弹性耦合激励振动筛和座式直线振动筛。     

Data management and analysis for high-throughput DNA sequencingprojects

The rapid advances in molecular biology have begun to shift many of the bottlenecks in genome research from the laboratory to the data analysis facility. The pace at which this has occurred creates a situation in which software development always has to catch up with the flow of data. Since such large-scale processes were not anticipated, the analysis infrastructure has not been fully established. Furthermore, most systems that have been built were designed by the biologists who collected the data. More recently, computer scientists, mathematicians, and engineers have taken an interest in this problem. This has had a positive effect, since it has created a tight synergy between the informatics and the biology. Several principles affected the design of the system developed at TIGR. Each of the sample preparation, sequencing, and analysis steps had to be managed, scheduled, and tracked. This information had to be made readily available to those who needed it for carrying out their tasks. Different skill levels of the users had to be taken into account. The degree of human intervention at each step had to be evaluated and built into the design. A mixed processing environment of Macintosh and Unix platforms had to be integrated. Most importantly, the system had to save time, reduce error, and ensure uniformity of the analysis and quality of the results. In the authors' experience, the tools they have built work well because of their early decisions as to which systems to use for development. The authors settled on a robust relational database management system (Sybase) and a portable development environment (C, C++)     

Structured genetic algorithm for robust H∞ controlsystems design

A structured genetic algorithm (SGA) approach is developed for robust controller design based on the concept of an H^∞ loop-shaping technique and the method of inequalities. Such an SGA is capable of simultaneously searching the orders and coefficients of the precompensator and postcompensator for the weighted plant. It is, therefore, not necessary to predefine the order of compensators as in usual practice. A multiple objective ranking approach is also incorporated so that the design criteria of extreme plants can be easily achieved. The effectiveness of such a technique is illustrated by a high-purity distillation column design example