一维波动方程反演波阻抗的实现及效果

利用波动方程反演波阻抗，由于计算工作量大、稳定性差等原因，一直没有在地震勘探资料处理中得到实际应用。本文提出的一维波方程逐段折叠反演方法能较好地克服上述缺陷，具有计算量相对较小、精度高、稳定性好等特点。并在大庆长垣东部和西部的实际资料处理中见到了良好的效果。     

用水竞争力指数评价方法及其应用研究

水资源短缺加剧了区域、行业间水资源竞争的程度,影响了水资源的演变格局,也对水资源供需管理提出了新的要求。为了定量化描述用水竞争现象,辨析了用水竞争力概念、内涵及其驱动因素,引入了用水竞争力指数（WCI）,并采用驱动增长率、刚性需水量、用水效益和用水紧缺程度四类指标构建了用水竞争力评价模型,以京津冀地区为例,定量分析得到京津冀地区2001—2015年农业、工业和生活分行业多年平均用水竞争力指数分别为0.09、0.17和0.56,其中生活用水竞争力指数最大并长期保持增长趋势,成为影响京津冀地区用水竞争力的主要行业,其次是工业用水竞争力指数,但呈波动性变化特征,农业用水竞争力指数最小但呈持续增加的趋势。     

Influence of content and creator characteristics on sharing disaster-related information on social media

Identifying the key factors of the disaster-related information propagation process can provide decision support for disaster management. This study characterizes the effects of content types, location, and social capital of social media users on the virality of disaster-related information. We found through the Weibo dataset of the Yiliang earthquake that the virality of different types of information can vary on the basis of the social capital of users who post the information. This study fills the current research gaps by examining the individual and joint effects of the content and creator characteristics on the virality of disaster-related information.     

深部巷道组合钢架合理支护间距数值模拟研究

为确定深部巷道组合钢架合理支护间距,有效控制深部巷道围岩变形,提高巷道施工机械化水平,以焦作煤业集团赵固(新乡)能源有限责任公司赵固二矿11071工作面回风巷为研究背景,采用三维有限差分软件对深部巷道6种支护方案的围岩变形、应力和塑性区分布进行对比分析.结果表明:深部巷道围岩变形和塑性区分布受围岩局部让压效应影响显著;在巷道拱顶、拱底以及两帮与底板交接部位均易出现应力集中现象;巷道开挖引起的岩体破坏以剪切破坏为主.根据数值模拟试验得出了深部巷道组合钢架合理支护间距,优选出的最佳支护方案可以减缓围岩变形,改善围岩应力状态,减少围岩塑性破坏范围,从而提高深部巷道围岩的稳定性.     

大丝束聚丙烯腈基预氧丝炭化研究

采用正交实验法研究了炭化温度、炭化时间、升温速率等因素对两种聚丙烯腈基预氧丝炭化产物结构和性能的影响.结果表明,进口东邦48 K大丝束聚丙烯腈基预氧丝环化程度优于国产吉林6 K小丝束聚丙烯腈基预氧丝,在炭化温度950℃,升温速率4℃/min,保温时间10 min条件下,炭化可取得最佳性能,炭化产物纤维拉伸强度达2.96 GPa,而国产吉林6 K小丝束在炭化温度1 100℃,升温速率4℃/min,保温时间5 min条件下炭化产物性能最佳,产物炭纤维拉伸强度近3.80 GPa.伴随两种预氧丝炭化过程,纤维颜色加深,表面缺陷减少,拉伸断裂模式均由假塑性向脆性过渡,为复合材料低成本开发中预氧丝坯体制备与炭化工艺提供了参考依据.     

Y2O3改性的MgO—ZrO2共析陶瓷

共析ＭｇＯ－ＺｒＯ２陶瓷添加Ｙ２Ｏ３可以获得高温热稳定性和较佳的力学性能，添加２％Ｙ２Ｏ３时断裂韧性为７．６ＭＰａ．ｍ＾１／２，弯曲强度为６１８ＭＰａ，用透射电子显微镜详细研究和讨论了上述材料的时效显微组织和韧化的原因。     

Microstructures and Dielectric Properties of Pure and Doped KNbO3 Ceramics

Regions consisting of grains of pronounced cubic develpment exist in pure KNbO₃ ceramics which exhibit a temperature dependence of dielectric constant very similar to that of KNbO₃ crystals. KNbO₃ ceramics doped with GeO₂-K₂O additives have small grains, semiconducting resistance, and a different curve of dielectric constant versus temperature. As the average grain size decreases, the shape of the curve differs increasingly from that of KNbO₃ crystals.     

应用一步流动法快速测定土水特征曲线试验研究

实验室常用压力板仪进行常规试验测定粉土土水特征曲线（SWCC）,需耗费数月时间,效率不高。对快速测定粉土SWCC进行了试验研究：采用压力板仪对粉土试样开展一步流动法试验;同时,用Hydrus-1D建立一维水分运移模型;结合模型对干密度为1.78 g/cm3粉土试样中溢出水量随加压时间的关系曲线进行拟合,并得出VG模型中难以实测的参数α和n;根据参数反算出粉土试样SWCC并和压力板仪常规试验的SWCC进行对比。为了消除试验中加载压力过大可能造成的固结对试验结果的影响,还对干密度为1.65 g/cm3的粉土试样进行固结试验使其干密度增大为1.78 g/cm3,再对固结后粉土试样分别进行常规试验和一步流动法试验。对由两种试验得到的固结粉土的SWCC与初始干密度1.78 g/cm3粉土由两种试验实测的SWCC进行了比较。结果表明：① 一步流动法试验拟合的SWCC与常规试验实测的SWCC重合度高;② 一步流动法试验具有快速性和有效性;③ 由Hydrus-1D建立的一维水分运移模型得出的SWCC与常规试验实测的SWCC接近;④ 一步流动法试验结果不会受到固结的影响。     

Bioelectrochemical sulfate reduction enhanced nitrogen removal from industrial wastewater containing ammonia and sulfate

Low organic carbon-to-nitrogen ratio and existing sulfate (SO₄²⁻) in industrial wastewater limited nitrogen removal. Coupling SO₄²⁻ reduction with sulfide autotrophic denitrification provides a novel strategy. Herein, bioelectrochemical sulfate reduction was coupled with heterotrophic sulfate reduction to drive sulfide autotrophic denitrification. In this coupled system, total nitrogen (TN) removal efficiency was increased from ~25% to ~85% by inputting −45 mA electricity. With the help of supplying electrons to denitrification through SO₄²⁻ reduction, coulomb efficiency was improved to 61.5%. Also, bioelectrochemical sulfate reduction could improve sulfur recovery and thus increase TN removal efficiency. Furthermore, through tuning turnover numbers of SO₄²⁻, high TN removal efficiency can be obtained at various concentrations of SO₄²⁻. Moreover, main functional bacteria in this system were identified. Finally, ~75% TN removal efficiency was achieved with real wastewater in this system. Overall, this work offered a new approach for efficient nitrogen removal from industrial wastewater containing SO₄²⁻.     

Electrically conductive and thermally stable SiC-TiC containing nanocomposites via flash pyrolysis

Flash pyrolysis, which combines conventional pyrolysis with flash sintering, was first conducted to produce polymer derived SiC-TiC nanocomposites. Pre-pyrolysis at 800℃ allows the conversion from titanium isopropoxide (TTIP) modified polysiloxane to an amorphous SiTiOC ceramic. The subsequent application of an electric field gives rise to the formation of turbostratic carbon and creates Joule heating to obtain a sample internal temperature of ~1400℃. The precipitation of β-SiC, TiC, as well as titanium oxides is realized upon carbothermal reduction of extensively phase separated SiO₂ and TiO₂ with carbon. Increasing TTIP content embodies the nanocomposites with prominent electrical percolation behaviors. The electrical transport of the synthesized ceramics follows an amorphous semiconductor mechanism. High thermal stability in air is guaranteed, thanks to the in-situ formed TiC nanocrystals and preferentially reduced amorphous carbon. Flash pyrolyzed nanocomposite with a Ti:Si molar ratio of 0.20 exhibits the highest electrical conductivity (0.696 S/cm) and minimum mass change (~2%) at 1000℃, serving as a competitive candidate for electro-discharge machining (EDM) applications or self-standing conducting devices that must withstand high temperature conditions.