Improved homogenization of Ni in sintered steels through the use of Cr-containing prealloyed powders

The homogenization of Ni in powder metal (PM) steel compacts is usually difficult even after high-temperature sintering at 1250°C. An earlier study by the authors demonstrated that this problem can be alleviated through the addition of 0.5 wt pct Cr in the form of stainless steel powders. To further improve the microstructure and mechanical properties of Ni-containing PM steels and to understand the mechanisms, an attempt was made in this study using the Fe-3Cr-0.5Mo prealloyed powder as the base material. The results showed that the distribution of the Ni additives was significantly improved. As a result, the tensile strength of the Fe-3Cr-0.5Mo-4Ni-0.5C compact sintered at 1250°C reached 1323 MPa. The elongation was higher than 1 pct. These sinter-hardened properties, which were attained using a slow furnace cooling rate, were comparable to those of the sinter-hardened alloys reported in the literature using accelerated cooling and were equivalent to those of the best quenched-and-tempered alloys registered in the Metal Powder Industries Federation (MPIF) standards. These improvements were attributed to the positive effect of Cr addition on alloy homogenization due to the reduction of the repelling effect between Ni and C, as was demonstrated through the thermodynamic analysis using the Thermo-Calc program.     

A power-driven multiplication instruction-set design method for ASIPs

This paper presents a novel power-driven multiplication instruction-set design method for application-specific instruction-set processors (ASIPs). Based on a dual-and-configurable-multiplier structure, our proposed method devises a multiplication instruction set for low-power ASIPs. Our method exploits the execution sequences of multiplication instructions and effective bit widths of variables to reduce power consumed by redundant multiplication bits while minimizing the multiplication execution time. Experimental results on a set of DSP programs demonstrate that our proposed method achieves significant power reduction (up to 18.53%) and execution time improvement (up to 10.43%) with 18% area overhead.     

Optically preamplified receiver performance due to VSB filtering for 40-Gb/s optical signals modulated with various formats

Optically preamplified receiver performance according to the vestigial sideband (VSB) filtering has been numerically investigated for 40-Gb/s optical signals modulated with nonreturn-to-zero, duobinary nonreturn-to-zero (NRZ), return-to-zero (RZ), carrier-suppressed RZ, and duobinary carrier-suppressed RZ formats. The VSB filtering enables the spectral widths of NRZ, duobinary NRZ, and RZ signals to be reduced without severe power penalties at the receiver. On the other hand, carrier-suppressed RZ and duobinary carrier-suppressed RZ signals have no large advantages over VSB filtering because of the characteristics of their signals. Our results suggest that RZ signals are the most suitable modulation format for VSB filtering, without considering the filter loss, because of the tolerance of the intersymbol interference and a large spectral width. However, duobinary NRZ signals are the most suitable modulation format for VSB filtering, considering the filter loss, because of their narrow spectral width.     

Measurement and numerical simulation of three‐dimensional fiber orientation states in injection‐molded short‐fiber‐reinforced plastics

To determine three‐dimensional fiber orientation states in injection‐molded short‐fiber composites, a confocal laser scanning microscope (CLSM) is used. Since the CLSM optically sections the specimen, more than two images of the cross sections on and below the surface of the composite can be obtained. Three‐dimensional fiber orientation states can be determined by using geometric parameters of fiber images obtained from two parallel cross sections. For experiments, carbon‐fiber‐reinforced polystyrene is examined by the CLSM and geometric parameters of fibers on each cross‐sectional plane are measured by an image analysis. In order to describe fiber orientation states compactly, orientation tensors are determined at different positions of the prepared specimen. Three‐dimensional orientation states are obtained without any difficulty by determining the out‐of‐plane angles utilizing fiber images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell–core structure along the thickness of the specimen. Fiber orientation tensors are predicted by a numerical analysis and the numerically predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from the fountain flow effects, which are not considered in the numerical analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 500–509, 2003     

Improved Yen-Joye's authenticated multiple-key agreement protocol

An authenticated multiple-key agreement protocol is proposed. The protocol is not only secure against the unknown-key attack but also more efficient than other protocols.     

Effects of contact shape on biological wet adhesion

Wet adhesion is widely adopted in biological adhesion systems in nature. Wet adhesion is studied in this paper with the focus on the effect of different contact shapes (flat, concave, convex, and ring-like) on the adhesion force. The evolution of the liquid bridge between a fiber tip and substrate during the detaching process shows two transition points. The first transition from the radius-controlled to the contact-angle controlled process is critical to influence the strength and robustness of adhesion. We show that a concave shape is more effective than a flat one, while a convex shape has no advantage. A ring-like contact shape has advantages in a hydrophobic environment and on a rough surface.     

Mode Matching Analysis of a Tapered Coaxial Tip in a Parallel-Plate Waveguide

A tapered coaxial tip in a parallel plate waveguide is investigated. A boundary-value problem of electromagnetic scattering from a tapered coaxial monopole is solved rigorously based on the Fourier transform, eigenfunction expansion, and mode matching. Scattering parameters are represented in a series and computed to understand the behavior of the scattering in terms of the coaxial tip geometry.     

Optimal and reinforced robustness designs of fuzzy variable structure tracking control for a piezoelectric actuator system

In this paper, a piezoelectric actuator (PEA) system is approximated by N subsystems, which are described by pulse transfer functions. The approximation error between the PEA system and the fuzzy linear pulse transfer function system is represented by additive nonlinear time-varying uncertainties in every subsystem. First, a dead-beat to the switching surface for every ideal subsystem is designed. It is called the "variable structure tracking control". The output disturbance of the ith subsystem is caused by the approximation error of fuzzy-model and the interaction dynamics resulting from other subsystems. In general, it is not small. Then, the H/sup /spl infin//-norm of the sensitivity function between the switching surface and the output disturbance is minimized. It is the "optimal robustness". Although the effect of the output disturbance is attenuated, a better performance can be reinforced by a switching control which is based on the Lyapunov redesign. This is the final step for the robustness design of control, which is "reinforced robustness". The stability of the overall system is verified by Lyapunov stability theory. Experimental work of a PEA system was carried out to confirm the validity of the proposed control.     

Mapping rule-based systems onto multicomputers using simulated annealing

In this paper, we present a static load balancing method for mapping production rules in an expert system onto processors of a message-passing multicomputer. The method uses simulated annealing to achieve a nearly optimal allocation of production rules onto processor nodes. The approach balances the initial rule distribution to avoid higher communication demand among processor nodes at run time. A formal mapping model is developed and a new cost function is defined for the annealing process. New heuristic swap functions and cooling policies are provided to ensure the quality of the annealing process. A software load balancing package, SIMAL, was implemented on a SUN workstation to carry out the benchmark experiments. The overhead associated with this mapping method is O(m In m), where m is the number of rules in the production system. Two benchmark production systems, Toru-waltz and Tourney, are mapped onto a hypercube computer with 32 nodes. Experimental benchmark results verify the effectiveness of the rule mapping method. The method can be applied for distributed artificial intelligence processing or for the parallel execution of cooperating expert systems on a message-passing multicomputer.