A thermochemical concept-based equation to estimate waste combustion enthalpy from elemental composition

Waste combustion is an interesting alternative for waste management and energy recovery. Knowledge of the waste higher heating value (HHV) is important for judging it’s worth as fuel. This work introduces a new equation, based on thermochemical concepts, to calculate HHV from elemental composition. This equation is expressed in terms of mass percentages on a dry basis of carbon (%C), hydrogen (%H), oxygen (%O), nitrogen (%N), and sulfur (%S); the HHV is computed in MJ/kg. The equation is as follows: HHV=(1−(%H₂O/100))(−0.3708(%C)−1.1124(%H)+0.1391(%O)−0.3178(%N)−0.1391(%S)). The thermochemical concept on which this expression is based involves a wide applicability. This equation neglects the inorganic carbon, hence it is not very adequate when there is a significant concentration of it. The predictions from this approach were contrasted against those proceeding from equations currently used in combustion technology, and also against bomb calorimeter data. The new equation is clearly competitive with respect to other formulations, and it can be very helpful for presenting a waste HHV value based on different derivation suppositions.     

Dynamic analysis and drilling degrees of freedom

Finite element methods for dynamic analysis employing elements with drilling degrees of freedom are presented. The formulation is based on a variational principle in which displacements and rotations are interpolated independently. The issue of zero masses corresponding to rotational degrees of freedom is addressed and techniques for defining consistent and lumped rotational mass matrices are presented.     

Analysis of the cooling capability of steam generators during the loss of residual heat removal system at midloop operation with closed primary system

Loss of residual heat removal system (RHRS) at midloop operation is one of the most significant core damage risk contributor at low power and shutdown conditions. During this kind of transients the reflux-condensation is one of the cooling mechanisms anticipated in the abnormal procedure of loss of RHRS at midloop level. In this sense, several simulations of loss of the RHRS with closed primary system with the TRACE V4.160 code have been performed considering different availability of steam generators. The present study aims to analyze the thermal-hydraulic behavior after the loss of RHRS at midloop conditions with the reflux-condensation as the only cooling mechanism available and to investigate the capability of this cooling mechanism. The simulation results show that one steam generator is sufficient to remove core decay heat of 11 MW obtaining an equilibrium pressure, but the core uncovery depends on the number of steam generators operating. Finally, an analysis of the abnormal procedure and the event trees of the loss of RHRS sequences at midloop operation has been performed taking into account the results obtained in the simulation with TRACE.     

Posterior representation with a multi‐modal likelihood using the gaussian sum filter for localization in a known map

A Gaussian sum filter (GSF) with component extended Kalman filters (EKF) is proposed as an approach to localizing an autonomous vehicle in an urban environment with limited GPS availability. The GSF uses vehicle‐relative vision‐based measurements of known map features coupled with inertial navigation solutions to accomplish localization in the absence of GPS. The vision‐based measurements have multimodal measurement likelihood functions that are well represented as weighted sums of Gaussian densities. The GSF is used because of its ability to represent the posterior distribution of the vehicle pose with better efficiency (fewer terms, less computational complexity) than a corresponding bootstrap particle filter with various numbers of particles because of the interaction with measurement hypothesis tests. The expectation‐maximization algorithm is used off line to determine the representational efficiency of the particle filter in terms of an effective number of Gaussian densities. In comparison, the GSF, which uses an iterative condensation procedure after each iteration of the filter to maintain real‐time capabilities, is shown through a series of in‐depth empirical studies to more accurately maintain a representation of the posterior distribution than the particle filter using 37 min of recorded data from Cornell University's autonomous vehicle driven in an urban environment, including a 32 min GPS blackout. © 2012 Wiley Periodicals, Inc.     

Surface and subsurface products of the interaction of O2 with Ag under catalytic conditions

Polycrystalline Ag treated with O₂ at pressures up to 1 bar and at temperatures up to 920 K was examined by TDS. It was found that the peak commonly observed at 595±25 K and assigned to adsorbed atomic oxygen (O_a) is shifted to higher desorption temperatures with rising dosing temperatures. Since saturation of the uptake was not possible either, this peak was identified as dissolved atomic oxygen (O_d). The existence of a maximum for the O₂ uptake after exposure at 820 K was found. Hence, under conditions of formaldehyde synthesis ( 920 K) the ability of the catalyst to dissolve oxygen is near its maximum.     

Hedgerow species and environmental conditions effects on soil total C and N and C and N mineralization patterns of soils amended with their prunings

An important criterium in selecting species for alley cropping is themineralization pattern of their prunings. This study determined effects of 5years of hedgerow pruning applications on soil organic C and total N at threelocations in Haiti and mineralization patterns from soil amended with theprunings during an incubation using micro-lysimeters. Soils (0–5cm) under 5 hedgerows were collected at each site and analyzed fororganic C and total N. In the laboratory, ground leaves and stems (<1cm diameter) of the hedgerow species were mixed with soil at ratesof 3 and 1.5 Mg ha^–1, respectively, andaerobically incubated in the dark at 25 °C. A non-amended soilwas used as control. Soils were leached to determine mineral N at 1, 3, 7, 14,28, 42, 84 and 120 days of incubation. Evolved CO₂ was measuredfollowing each leaching procedure. At the calcareous site, application ofprunings from Leucaena leucocephala (Lam.) De Wit andDelonix regia (Boj. ex Hook. Raf.) resulted in 23 and 13%higher soil N than the control, respectively, after 5 years. There were nodifferences in total N at the other sites but soil N was highest underLeucaena hybrid and Acaciaangustissima (Mill.) Kuntze, respectively at the basaltic and highelevation sites. Soils under D. regia (calcareous) andA. angustissima and Leucaena hybrid(high elevation) had higher organic C than the respective controls. Carbon andNmineralization and C turnover were highest when soils were amended with leavesof Leucaena diversifolia (Schlecht.) Benth (calcareous andbasaltic soils) and A. angustissima (high elevation) andlowest in non-amended control soils. Stem-amended soils showed differences in Cmineralization for calcareous and high elevation soils whereas N mineralizationwas similar among treatments within sites. Carbon and N mineralization (highelevation soil) correlated positively with N concentrations of leaf prunings.Amendments with leaf prunings increased soil C and N mineralization andturnoverrates, suggesting greater nutrient availability for the crop during a shortperiod than in non-amended control soils.     

Electrophilic Aromatic Functionalization of Phenolic Photoresist Polymers

Summary Functionalization of both linear poly(4-hydroxystyrene) (PHS) and branched poly(4-hydroxystyrene) (PHS-B) was accomplished via a Reimer-Tiemann electrophilic aromatic substitution reaction. Linear and branched poly(4-hydroxystyrene-co-5-vinylsalicylaldehyde) (pHS/5VSA and pHS-B/5VSA) copolymers were observed to undergo acid-catalyzed, novolac type self-crosslinking. Both the pHS/5VSA and pHS-B/5VSA copolymer systems possessed a lower deep ultra violet microlithographic sensitivity compared to linear PHS when formulated in negative photoresists. The sluggishness of the negative photoresists containing 5-vinylsalicylaldehyde functionalized copolymers was attributed to a combination of resonance stabilization and steric hindrance effects.