Latchup-free ESD protection design with complementary substrate-triggered SCR devices

The turn-on mechanism of silicon-controlled rectifier (SCR) devices is essentially a current triggering event. While a current is applied to the base or substrate of an SCR device, it can be quickly triggered on into its latching state. In this paper, latchup-free electrostatic discharge (ESD) protection circuits, which are combined with the substrate-triggered technique and an SCR device, are proposed. A complementary circuit style with the substrate-triggered SCR device is designed to discharge both the pad-to-V/sub SS/ and pad-to-V/sub DD/ ESD stresses. The novel complementary substrate-triggered SCR devices have the advantages of controllable switching voltage, adjustable holding voltage, faster turn-on speed, and compatible to general CMOS process without extra process modification such as the silicide-blocking mask and ESD implantation. The total holding voltage of the substrate-triggered SCR device can be linearly increased by adding the stacked diode string to avoid the transient-induced latchup issue in the ESD protection circuits. The on-chip ESD protection circuits designed with the proposed complementary substrate-triggered SCR devices and stacked diode string for the input/output pad and power pad have been successfully verified in a 0.25-/spl mu/m salicided CMOS process with the human body model (machine model) ESD level of /spl sim/7.25 kV (500 V) in a small layout area.     

Future dental public health programs: forging community and academic collaborations

In the past 5 years we have discovered 8 boys and 3 girls who suffer from fructose-1,6-bisphosphatase deficiency. Although they all showed the typical symptoms of the deficiency such as frequent vomiting, hypoglycemia, lactic acidosis, and hepatomegaly, the age at diagnosis varied from 2 months to 4 years. All the boys revealed the deficient enzyme activity in leukocytes but none of the girls. The liver biopsy was investigated in six patients to confirm the diagnosis. These results suggest the existence of tissue-specific isoenzymes for fructose-1,6-bisphosphatase possibly with a different gene origin.     

The rationale for cementless total hip replacement

Current cementing techniques of distal plugging, pulsatile water cleaning of the canal, and retrograde filling with PMMA in a low-viscous state prepared using porosity reduction techniques and then pressurized have been shown to give excellent results at 10 or more years after operation. However, physical and aging characteristics of PMMA do not guarantee that those results will hold up in the 20- to 30-year time frame. Fifteen-year experience with bony ingrowth systems indicate the development of a durable interface without PMMA, although the interface does appear more vulnerable to attack by the biologic reaction to HMWPE debris. Bone remodeling appears more favorable around proximally fixed bone ingrowth prostheses than around distally fixed prostheses. Softening of the physical characteristics of the stem tip may reduce the incidence of thigh pain. Patients with high activity potential and a life expectancy of greater than 25 years should be strongly considered for a proximally fixed bone ingrowth or ongrowth prosthesis.     

Parameters affecting the use of the lac repressor system in eukaryotic cells and transgenic animals

Elements of the lactose operon were used to study parameters affecting gene expression in cultured cells and transgenic animals. A Lac repressor protein containing a nuclear transport signal was shown to inhibit expression of a reporter gene by interacting with lac operator sequences. In cultured cells, operator sequence, operator placement and induction parameters were all shown to be important for obtaining tight repression of a reporter gene followed by high level expression upon induction. Induction levels were also dependent on the reporter gene, with the luciferase gene yielding higher induction levels than the chloramphenicol acetyltransferase gene. In transgenic animals, the lacI mRNA was not detected in the C57BL/6 mouse strain until the animal was exposed to a demethylating agent. After 5-azacytidine treatment, expression of lacI mRNA was detected in the brain, heart, kidney, lung and ovary. In the FVB transgenic mouse strain, expression of lacI mRNA was detected without 5-azacytidine treatment in the kidney, liver, lung, and testes. Preliminary experiments with double transgenic animals containing both lacI and operator/luciferase transgenes showed a decrease in luciferase expression compared to the luciferase-only animals in both tissue extracts and transgenic fetal primary cultures, although IPTG induction was not achieved in these animals or primary cultures. The applicability and challenges of the system for regulation of gene expression are discussed.     

Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

Note on ‘Construction of Double Sampling s‐Control Charts for Agile Manufacturing’

He and Grigoryan (Quality and Reliability Engineering International 2002; 18 :343–355) formulated the design of a double‐sampling (DS) s control chart as an optimization problem and solved it with a genetic algorithm. They concluded that the DS s control charts can be a more economically preferable alternative in detecting small shifts than traditional s control charts. We explain that, since they only considered the average sample size when the process is in control, their conclusion is questionable. Copyright © 2006 John Wiley & Sons, Ltd.     

Optimum power-saving method for power MOSFET width of DC/DC converters

An optimum power metal-oxide-semiconductor field effect transistor (MOSFET) width technique is proposed for enhancing the efficiency characteristics of switching DC-DC converters. By implementing a one-cycle buck DC-DC converter, it is demonstrated that the dynamic power MOSFET width controlling technique has a much improved power reduction whether the load current is light or heavy. The maximum efficiency of the buck converter is ~92% with a 3% efficiency improvement for the heavy load condition. The efficiency is further improved by ~16% for the light load condition as a result of the power reduction from the large power MOSFET transistors. Also proposed is a new error-correction loop circuit to enable a better load regulation than that of previous designs. Compared with the adaptive gate driver voltage technique, the optimum power MOSFET width can achieve a significant improvement in power saving. It is also superior to the low-voltage-swing MOSFET gate drive technique for switching DC-DC converters     

Robust State Feedback Control Through Actuators With Generalized Sector Nonlinearities And Saturation

In control systems, actuators often have nonlinear characteristics that can not be neglected. For linear systems driven by actuators satisfying the generalized sector condition, a robust state feedback controller synthesis method is proposed to achieve the ultimate boundedness control. The method is based on the linear matrix inequality approach and is easy to apply. As an important special case of the generalized sector condition, the saturation characteristic of actuators is discussed separately, and non‐conservative results are obtained.     

A Hammerstein-based dynamic model for hysteresis phenomenon

The Hammerstein configuration, which includes a nonlinear static block followed by a linear dynamic block, is applied to model the rate-dependent and temperature-dependent hysteresis phenomenon. The nonlinear static block is realized by a modified Preisach model, which includes both the irreversible and reversible components of magnetization. The linear dynamic block is realized by a low-pass filter, which takes into account the rate-dependent effects of hysteresis. Temperature dependencies are incorporated into the model by fitting the model parameters as piecewise-linear functions of temperature. A procedure is described for the extraction of a single set of model parameters over the frequency, amplitude, and temperature ranges of interest. The theory is verified experimentally     

Periodontal management of gingival overgrowth in the heart transplant patient: a case report

Heart transplant patients take several medications that could affect their periodontal health. Gingival overgrowth associated with cyclosporin (immunosuppressant agent) and nifedipine (calcium channel blocker) is well documented. Candidal infections often develop because of immune suppression. This report describes the clinical and histopathological changes in the gingival tissues of a heart transplant patient and their management. The gingival tissues exhibited pronounced enlargement. The gingivae were lobulated, and the surface of the lobulations was pebbly and granular. Biopsies showed lobules of fibrous connective tissue covered by stratified squamous epithelium. The outer surfaces were dotted with numerous smaller papillations. Candidal hyphae were present in the superficial layers of the epithelium. The extensive papillary lesions appear to be related to candidiasis and constitute a condition which is best designated as papillary stomatitis. Hyperplastic gingival tissues were excised, and the patient was placed on periodic maintenance. One-year postoperative follow-up showed minor gingival growth.