To treat or not to treat: comparison of different criteria used to determine whether weight loss is to be recommended

Background  

Excess body fat is a major risk factor for disease primarily due to its endocrine activity. In recent years several criteria have been introduced to evaluate this factor. Nevertheless, treatment need is currently assessed only on the basis of an individual's Body Mass Index (BMI), calculated as body weight (in kg) divided by height in m². The aim of our study was to determine whether application of the BMI, compared to adiposity-based criteria, results in underestimation of the number of subjects needing lifestyle intervention.     

Large deflections and stability FEM analysis of shear deformable compressed anisotropic flat panels

This paper deals with the non-linear analysis of multilayered axially compressed plates in the static elastic conservative cases. A finite element model based on a Reissner-Mindlin theory involving von Kármán nonlinearity is developed. Results related to the classical Kirchhoff plate approximations are obtained via application of a penalty technique to the shear correction factor. The numerical investigations have concerned the large deflections and postbuckling behaviour of symmetrically and non-symmetrically anisotropic flat panels. The main conclusions are: (1) the non-linear effects very much depend on lay-up and boundary conditions, moreover for the asymmetric laminated long plates the snapping-type instability occurs; (2) the shear deformation effects are very much subordinate to both multilayered lay-up and load levels, furthermore they are greater in the large deflections field; (3) it has been observed that in the neighbourhood of a singularity (of buckling point type) of the tangent stiffness matrix, the use of an arc-length type algorithm could lead to a new buckled path and that happens without employing an appropriate turning bifurcation algorithm with an accompanying eigenvalues calculation, but via a non-convergent iteration in the loadstep.     

A Survey of Airworthiness and Certification for UAS

The Italian SMAT project is a civilian program supported by Piemonte Region developed for the territorial monitoring and surveillance and for the prevention of natural hazards. In a different way from the previous surveillance programs, the SMAT project is based on the use of several unmanned platforms that are able to cooperate through ground coordination and control station. The flight in non-segregated airspace, needed in order to accomplish the territorial monitoring mission, is a main issue to be investigated and defined, because of the current lack of a common consensus and agreement on the regulations of UAS. The present work outlines the international initiatives that deal with the development of the regulatory framework on airworthiness and certification of UAS and their potential impact on the SMAT project.     

The multimod application framework: a rapid application development tool for computer aided medicine

This paper describes a new application framework (OpenMAF) for rapid development of multimodal applications in computer-aided medicine. MAF applications are multimodal in data, in representation, and in interaction. The framework supports almost any type of biomedical data, including DICOM datasets, motion-capture recordings, or data from computer simulations (e.g. finite element modeling). The interactive visualization approach (multimodal display) helps the user interpret complex datasets, providing multiple representations of the same data. In addition, the framework allows multimodal interaction by supporting the simultaneous use of different input-output devices like 3D trackers, stereoscopic displays, haptics hardware and speech recognition/synthesis systems. The Framework has been designed to run smoothly even on limited power computers, but it can take advantage of all hardware capabilities. The Framework is based on a collection of portable libraries and it can be compiled on any platform that supports OpenGL, including Windows, MacOS X and any flavor of Unix/linux.     

Identification of the female-produced sex pheromone of the scarab beetle,Hoplia equina

Hoplia equina LeConte (Coleoptera: Scarabaeidae: Melolonthinae) is a beetle pest of cranberry beds in Massachusetts. Larvae feed on the roots of the cranberry plant, reducing yield as well as vine density. The female sex pheromone was identified as 2-tetradecanone. There were eight compounds found in the airborne volatiles collected from females that elicited antennal responses from males. Of the eight compounds tested (nonanal, decanal, dodecanal, 2-dodecanone, 2-tridecanone, 2-tetradecanone, 2-pentadecanone, and 2-hexadecanone), 2-tetradecanone was the only one that attracted male beetles in the field. Combining any of the other seven antennally active compounds with 2-tetradecanone did not increase male capture.     

Improved Bladder Tumor RNA Isolation from Archived Tissues Using Methylene Blue for Normalization,Multiplex RNA Hybridization,Sequencing and Subtyping

Methylene blue (MB) is a dye used for histology with clinical importance and intercalates into nucleic acids. After MB staining of formalin fixed paraffin embedded (FFPE) muscle invasive bladder cancer (MIBC) and normal urothelium, specific regions could be microdissected. It is not known if MB influences RNA used for gene expression studies. Therefore, we analyzed MIBC using five different RNA isolation methods comparing patient matched FFPE and fresh frozen (FF) tissues pre-stained with or without MB. We demonstrate a positive impact of MB on RNA integrity with FF tissues using real time PCR with no interference of its chemical properties. FFPE tissues showed no improvement of RNA integrity, which we propose is due to formalin induced nucleotide crosslinks. Using direct multiplex RNA hybridization the best genes for normalization of MIBC and control tissues were identified from 34 reference genes. In addition, 5SrRNA and 5.8SrRNA were distinctive reference genes detecting <200 bp fragments important for mRNA analyses. Using these normalized RNAs from MB stained MIBC and applying multiplex RNA hybridization and mRNA sequencing, a minimal gene expression panel precisely identified luminal and basal MIBC tumor subtypes, important for diagnosis, prognosis and chemotherapy response.     

Biobased surfactant-like molecules from organic wastes: the effect of waste composition and composting process on surfactant properties and on the ability to solubilize Tetrachloroethene (PCE)

In this work, four surfactant-like humic acids (HAs) obtained from garden lignocellulose wastes and kitchen food wastes mixed with garden-lignocellulose wastes, both before and after composting, were tested for surfactant properties and the ability to solubilize tetrachloroethene (PCE). The waste-derived HAs showed good surfactant properties, lowering the water surface tension from 74 mN m(-1) to 45.4 +/- 4.4 mN m(-1), with a critical micelle concentration (CMC) of 1.54 +/- 1.68 g L(-1), which is lower than many synthetic ionic surfactants. CMC was affected by both waste origin and composting processes. The addition of food waste and composting reduced CMC by adding alkyl-C (measured by CP MAS 13C NMR) and N- and S-HA contents (amide molecules), so that a multistep regression was found [CMC = 24.6 - 0.189 alkyl C - 2.64 (N + S); R2 = 0.77, P < 0.10, n = 6]. The four HAs solubilized PCE at the rate of 0.18-0.47 g PCE/g aqueous biosurfactant. These results were much higher than those reported in the literature for a commercial HA (0.026 g/g), but they were in line with those measured in this work for nonionic surfactants such as Tween-80 (0.69 g/g) and Triton X-100 (1.08 g/g).     

Microbial succession during ripening of Naples-type salami, a southern Italian fermented sausage

Studies were carried out on the microbiological and physico-chemical changes which occurred during the ripening of five batches of Naples-type salami, manufactured without starter cultures. Salami were sampled internally and externally, and the following microbial groups were studied: lactic acid bacteria, Micrococcaceae and yeasts. The results obtained indicated that lactobacilli constituted the predominant flora, both on the surface and in the interior of the pieces throughout the ripening period. Micrococcaceae and yeasts were also found in considerable number in both locations. Characterisation of 191 lactic isolates indicated that the salami microflora was dominated by homofermentative lactobacilli; approximately 63% of them could be identified as Lactobacillus sake; 40% showing the traits of a racemase negative variant of this species, once referred to Lactobacillus bavaricus. Yeast population mainly comprised Debaryomyces strains. All the colonies grown on mannitol salt and Kranep agar were catalase-positive cocci; novobiocin-resistant staphylococci were the only Micrococcaceae found. The API Staph identification system did not prove to be reliable: 82% of the isolates remained unidentified. To achieve improved characterisation, cluster analysis was subsequently performed on this group, corroborating the existence of a fairly homogeneous group representing an intermediate variety between Staphylococcus xylosus and Staphylococcus saprophyticus that was isolated during the whole ripening process.     

FMS for Unmanned Aerial Systems: HMI Issues and New Interface Solutions

To integrate UASs in the NAS, an improvement in navigation, planning, communication and 4D trajectory control capabilities is mandatory. A way to obtain this enhance is to adopt a Flight Management System. A FMS for an UAS has some differences with respect to one for a manned aircraft, in terms of architecture and performed functions. In particular, from HMI point of view, the specific UAS human factor issues shall be added to the current manned FMS interface lacks. Starting from these considerations, a new FMS HMI for the Alenia Aeronautica TCS has been developed, using as data entry devices two touch screens.     

Analysis of the indoor GPS system as feedback for the robotic alignment of fuselages using laser radar measurements as comparison

The alignment of aircraft fuselages in the aerospace sector is currently done either manually or by complex, expensive automated systems. The manual process introduces a significant production delay and the automated systems are purpose-built and have limited flexibility, apart from its financial drawback. This work proposes a low-cost, high-flexibility system and, as part of it, evaluates the performance of a Rotary-Laser Automatic Theodolite (R-LAT) as a feedback source for the adaptive robot control of an anthropomorphic manipulator. In the proposed solution the robot carries a fuselage barrel and aligns it with respect to a second barrel. A high accuracy, frequency-modulated laser equipment is used to generate the reference system for the procedure. The measurements of the R-LAT are then verified with the frequency-modulated laser equipment in order to determine the linear and angular alignment tolerances achieved by the robot/R-LAT closed loop in a predefined work envelope. A throughout, step-by-step analysis of the measuring procedure is carried out to allow the recognition of error sources and thus the determination of an optimized method. These results identify the operation boundaries of the R-LAT within the process and yield its best configuration for the intended purpose. Using the EN ISO 9283 robot evaluation standard, the closed loop system was found to attain the nominal position with an average accuracy of 0.38 mm and 0.01°, contrasting with an average accuracy of 4.53 mm and 0.21° when the robot was operating in an open loop configuration.