Formation of toxic aldehydes in cod liver oil after ultraviolet irradiation

Formaldehyde, acrolein, malonaldehyde (MA), acetaldehyde and propanal produced from cod liver oil upon ultraviolet irradiation (λ_max=300 nm) were derivatized into nitrogenor sulfur-containing compounds and then analyzed by capillary gas chromatography with a nitrogen-phosphorus detector or a flame photometric detector. Acrolein and MA were formed at levels of 10.9±3.06 and 190.2±38.4 nmol/mg of fish oil, respectively. Maximum levels of formaldehyde, acetaldehyde and propanal formed were 7.0±0.90, 49.1±4.5 and 35.8±4.0 nmol/mg of oil, respectively. Formation of propanal in large quantities corresponded to the high content of ɛ-3 fatty acids in cod liver oil.     

Synthesis of poly(methyl methacrylate)/silica nanocomposite through emulsion polymerization using dimethylaminoethyl methacrylate

Polymer/Silica nanocomposite latex particles were prepared by emulsion polymerization of methyl methacrylate (MMA) with dimethylaminoethyl methacrylate (DM). The reaction was performed using a nonionic surfactant and in the presence of silica nanoparticles as the seed. The polymer‐coated silica nanoparticles with polymer content and number average particle sizes ranged from 32 to 93 wt % and 114–310 nm, respectively, were obtained depending on reaction conditions. Influences of some synthetic conditions such as MMA, DM, surfactant concentration, and the nature of initiator on the coating of the silica nanoparticles were studied. Electrostatic attraction between anionic surface of silica beads and cationic amino groups of DM is the main driving force for the formation of the nanocomposites. It was demonstrated that the ratio of DM/MMA is important factor in stability of the system. The particle size, polymer content, efficiency of the coating reaction, and morphology of resulted nanocomposite particles showed a dependence on the amount of the surfactant. Zeta potential measurements confirmed that the DM was located at the surface of the nanocomposites particles. Thermogravimeteric analysis indicated a relationship between the composition of polymer shell and polymer content of the nanocomposites. The nanocomposites were also characterized by FTIR and differential scanning calorimetry techniques. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The approximate solution of charged particle motion equations in oscillating magnetic fields using the local multiquadrics collocation method

The charged particle motion for certain configurations of oscillating magnetic fields can be simulated by a Volterra integro-differential equation of the second order with time-periodic coefficients. This paper investigates a simple and accurate scheme for computationally solving these types of integro-differential equations. To start the method, we first reduce the integro-differential equations to equivalent Volterra integral equations of the second kind. Subsequently, the solution of the mentioned Volterra integral equations is estimated by the collocation method based on the local multiquadrics formulated on scattered points. We also expand the proposed method to solve fractional integro-differential equations including non-integer order derivatives. Since the offered method does not need any mesh generations on the solution domain, it can be recognized as a meshless method. To demonstrate the reliability and efficiency of the new technique, several illustrative examples are given. Moreover, the numerical results confirm that the method developed in the current paper in comparison with the method based on the globally supported multiquadrics has much lesser volume computing.

     

Model reference adaptive impedance control in Cartesian coordinates for physical human–robot interaction

In this paper, a nonlinear model reference adaptive impedance controller is proposed and tested. The controller provides asymptotic tracking of a reference impedance model for the robot end-effector in Cartesian coordinates applicable to rehabilitation robotics or any other human–robot interactions such as haptic systems. The controller uses the parameters of a desired stable reference model which is the target impedance for the robot’s end-effector. It also considers uncertainties in the model parameters of the robot. The asymptotic tracking is proven using Lyapunov stability theorem. Moreover, the adaptation law is proposed in joint space for reducing the complexity of its calculations; however, the controller and the stability proof are all presented in Cartesian coordinates. Using simulations and experiments on a two DOFs robot, the effectiveness of the proposed controller is investigated.     

Highly efficient synthesis of coumarin derivatives in the presence of H14[NaP5W30O110] as a green and reusable catalyst

A variety of heteropolyanions including: Keggin, Dawson, Preyssler, mixed addenda and sandwich types, catalyzed the formation of 4-methylnaphtho-(1,2-b)-pyran-2-one (coumarin) from the condensation of α-naphthol and ethylacetoacetate in a solvent free system and under heating conditions. Our data vividly indicate that sodium30–tungsto pentaphosphate, [NaP₅W₃₀O₁₁₀]¹⁴⁻, which so-called Preyssler’s anion, with high hydrolytic (pH 0–12) and thermal stability is the catalyst of choice. This catalyst catalyzed the synthesis of other coumarin derivatives in high yields and good selectivity.     

Enhancing spatial and temporal utilities in differentially private moving objects database release

International Journal of Information Security - The pervasive use of mobile technologies and GPS-equipped vehicles has resulted in a large number of moving objects databases. Privacy protection is...     

Determination of stability constants of mercury(II) by garlic organosulfur ligands with differential pulse voltammetry

Journal of Applied Electrochemistry - In this work, interactions of mercury with di allyl disulfide (DADS), dimethyl disulfide (DMDS), and diallyl sulfide (DAS) were studied by differential pulse...     

MC-MLAS: Multi-channel Minimum Latency Aggregation Scheduling in Wireless Sensor Networks

Data aggregation is a key, yet time-consuming functionality in wireless sensor networks (WSNs). Multi-channel design is a promising technique to alleviate interference as a primary reason for long latency of TDMA aggregation scheduling. Indeed, it provides more potential of parallel transmissions over different frequency channels, thus minimizing time latency. In this paper, we focus on designing a multi-channel minimum latency aggregation scheduling protocol, named MC-MLAS, using a new joint approach for tree construction, channel assignment, and transmission scheduling. To our best knowledge, this is the first work in the literature which combines orthogonal channels and partially overlapping channels to consider the total latency involved in data aggregation. Extensive simulations verify the superiority of MC-MLAS in WSNs.     

Embedding linear arrays of the maximum length in O-shaped meshes

The Journal of Supercomputing - Embedding an interconnection network into another network is one of the important problems in parallel processing. In this paper, we study embedding of linear arrays...     

ETAS: predictive scheduling of functions on worker nodes of Apache OpenWhisk platform

The Journal of Supercomputing - Fast execution of functions is an inevitable challenge in the serverless computing landscape. Inefficient dispatching, fluctuations in invocation rates, burstiness...