Opiate users and the first years after treatment: outcome analysis of the proportion of follow up time spent in abstinence

This second report on a follow-up study of drug users focuses on changes that occurred on a number of variables between intake and follow-up and during the follow-up period. The length of abstinence from opiates was considered as a proportion of the total follow-up period. Overall there was a reduction in opiate use, in injecting and sharing equipment at follow-up. There had been, however, a high level of these risky activities during the follow-up period. Sustained abstinence from opiates was associated with increased employment, enhanced social stability and mental health. Intake drug use was strongly related to follow-up drug status. In particular, those who were injectors of multiple drugs at intake were far less likely to be long term opiate abstainers at follow-up than those who were not injectors at intake or injectors of opiates only.     

Phase I trial of weekly scheduling and pharmacokinetics of titanocene dichloride in patients with advanced cancer

PURPOSE: To determine the maximum-tolerated dose (MTD) and the dose-limiting toxicities (DLTs) of a weekly schedule of titanocene dichloride (TD) and to define the pharmacokinetics of titanium in plasma and urine. PATIENTS AND METHODS: Twenty patients with a median age of 58 years received 83 courses of TD. TD was given as 1-hour infusion at escalating doses from 70 to 185 mg/m2/wk. Pharmacokinetic analysis was performed in eight patients for total plasma titanium (TPTi) and in three patients for ultrafiltrable titanium (UFTi). RESULTS: At the fifth dose level (185 mg/m2/wk), a variety of DLTs were seen in five patients: fatigue in three, bilirubinemia in one, and hypokalemia in two. A further six patients were treated at 140 mg/m2; only one had dose-limiting creatinine elevation and this dose was therefore defined as the MTD. No myelosuppression or alopecia were observed. One patient with adenocarcinoma of unknown primary had a minor response. Pharmacokinetic analysis showed that TPTi maximum concentration (Cmax) values were linear with dose and elimination of TPTi was triphasic with a long terminal half-life (t1/2; median, 165 hours; range, 89 to 592). Between 7% and 24.3% of the total of administered titanium was eliminated in urine over the first 24 hours. In contrast, UFTi elimination was described by a one-compartment model with a t1/2 of 0.41 hours; peak levels of UFTi were 5.2% +/- 2.5% those of TPTi. CONCLUSION: The MTD of TD given on a weekly schedule is 140 mg/m2, with cumulative, but reversible creatinine and bilirubin elevation being the DLTs.     

Industrial architectural assessment using TARA

Scenario based architectural assessment is a well-established approach for assessing architectural designs. However scenario-based methods are not always usable in an industrial context, where in our experience, they can be perceived as complicated and expensive to use. In this paper we explore why this may be the case and define a simpler technique called TARA, which has been designed for use in situations where scenario based methods are unlikely to be successful. The method is illustrated through an experience report that explains how it was applied to the assessment of two quantitative financial analysis systems, and its strengths, weaknesses and relationship to other methods are briefly discussed.     

Emittance measurements of solids above 2000 deg C

A method of measuring the emittance of solids above 2000 deg C through the use of a solar furnace has been developed. Two techniques involving specialized instrumentation, for performing the necessary measurements were investigated. Initial experiments showed that both techniques were suitable and that the specified instruments were adaptable for making the required measurements.     

Effect of temperature on raw whole milk density and its potential impact on milk payment in the dairy industry

The objective of this study was to determine the effect of temperature on whole milk density measured at four different temperatures: 5, 10, 15, and 20 °C. A total of ninety-three individual milk samples were collected from morning milking of thirty-two Holstein Friesian dairy cows, of national average genetic merit, once every two weeks over a period of 4 weeks and were assessed by Fourier transform infrared spectroscopy for milk composition analysis. Density of the milk was evaluated using two different analytical methods: a portable density meter DMA35 and a standard desktop model DMA4500M (Anton Paar GmbH, UK). Milk density was analysed with a linear mixed model with the fixed effects of sampling period, temperature and analysis method; triple interaction of sampling period x analysis method x temperature; and the random effect of cow to account for repeated measures. The effect of temperature on milk density (ρ) was also evaluated including temperature (t) as covariate with linear and quadratic effects within each analytic method. The regression equation describing the curvature and density–temperature relationship for the DMA35 instrument was ρ = 1.0338−0.00017T−0.0000122T² (R² = 0.64), while it was ρ = 1.0334 + 0.000057T−0.00001T² (R² = 0.61) for DMA4500 instrument. The mean density determined with DMA4500 at 5 °C was 1.0334 g cm⁻³, with corresponding figures of 1.0330, 1.0320 and 1.0305 g cm⁻³ at 10, 15 and 20 °C, respectively. The milk density values obtained in this study at specific temperatures will help to address any bias in weight–volume calculations and thus may also improve the financial and operational control for the dairy processors in Ireland and internationally.     

Prediction of processed cheese instrumental texture and meltability by mid-infrared spectroscopy coupled with chemometric tools

The objective of this study was to determine the potential of mid-infrared spectroscopy coupled with multidimensional statistical analysis for the prediction of processed cheese instrumental texture and meltability attributes. Processed cheeses (n = 32) of varying composition were manufactured in a pilot plant. Following two and four weeks storage at 4 °C samples were analysed using texture profile analysis, two meltability tests (computer vision, Olson and Price) and mid-infrared spectroscopy (4000–640 cm⁻¹). Partial least squares regression was used to develop predictive models for all measured attributes. Five attributes were successfully modelled with varying degrees of accuracy. The computer vision meltability model allowed for discrimination between high and low melt values (R² = 0.64). The hardness and springiness models gave approximate quantitative results (R² = 0.77) and the cohesiveness (R² = 0.81) and Olson and Price meltability (R² = 0.88) models gave good prediction results.     

Fractionation and analysis of rat liver14CH3-lecithins labeled in vivo

The¹⁴CH₃-lecithins were biosynthesized by normal adult rats injected with¹⁴CH₃-methionine. About 20% of the dose was incorporated into liver lecithins. The¹⁴CH₃-lecithins were isolated by thin-layer chromatography. Separation of lecithins on AgNO₃-treated silica gel yielded lecithins containing a saturated fatty acid in combination with mainly one unsaturated fatty acid, namely, oleic, linoleic, eicosatrienoic, or arachidonic acid. These fractions were eluted with methanolic choline chloride, which prevented elution of AgNO₃. The lecithins, after extraction into petroleum ether, were analyzed for radioactivity and for fatty acid composition. Yields were about 75%, based upon fatty acids or radioactivity applied to the plate. Specific activities differed sharply between the fractions, and arachidonoyllecithins had the highest specific activity. The sum of the activities contributed by each of the fractions agreed well with the specific activity of total lecithins, indicating the recovery of intact lecithin molecules. The recovery of intact molecules allows this procedure to be used with lecithins containing any isotopic labels. The high specific activity of arachidonoyl-lecithins relative to the other fractions indicates a high degree of specificity in the metabolic reactions which lead to the formation of rat liver lecithins.     

Effect of milk centrifugation and incorporation of high-heat-treated centrifugate on the composition,texture, and ripening characteristics of Maasdam cheese

This study investigated the effect of centrifugation (9,000 × g, 50°C, flow rate = 1,000 L/h), as well as the incorporation of high-heat-treated (HHT) centrifugate into cheese milk on the composition, texture, and ripening characteristics of Maasdam cheese. Neither centrifugation nor incorporation of HHT centrifugate into cheese milk had a pronounced effect on the compositional parameters of any experimental cheeses, except for moisture and moisture in nonfat substance (MNFS) levels. Incorporation of HHT centrifugate at a rate of 6 to 10% of the total milk weight into centrifuged milk increased the level of denatured whey protein in the cheese milk and also increased the level of MNFS in the resultant cheese compared with cheeses made from centrifuged milk and control cheeses; moreover, cheese made from centrifuged milk had ～3% higher moisture content on average than control cheeses. Centrifugation of cheese milk reduced the somatic cell count by ～95% relative to the somatic cell count in raw milk. Neither centrifugation nor incorporation of HHT centrifugate into cheese milk had a significant effect on age-related changes in pH, lactate content, and levels of primary and secondary proteolysis. However, the value for hardness was significantly lower for cheeses made from milk containing HHT centrifugate than for other experimental cheese types. Overall, centrifugation appeared to have little effect on composition, texture, and ripening characteristics of Maasdam cheese. However, care should be taken when incorporating HHT centrifugate into cheese milk, because such practices can influence the level of moisture, MNFS, and texture (particularly hardness) of resultant cheeses. Such differences may have the potential to influence subsequent eye development characteristic, although no definitive trends were observed in the present study and further research on this is recommended.     

Comparison of pH-dependent sonodisruption of re-assembled casein micelles by 35 and 130 kHz ultrasounds

Sonodisruption behavior of re-assembled casein micelles was compared at two ultrasound frequencies (35 and 130 kHz) by turbidity measurement and laser-diffraction based particle size analysis. Sonochemical ultrasound (130 kHz) was more effective than power ultrasound (35 kHz) in micelle disruption. This was attributed to the higher strain rates generated upon implosion of cavities, as well as the liberation of more free radicals to the surrounding medium. The higher the pH of solution, the more effective was the ultrasonic disruption due to a looser expanded assembly of particles at higher pH values. Sonochemical ultrasound decreased the consistency coefficient of casein solutions and increased their flow index except at a pH value of 6.35, while power ultrasound did not affect the flow behavior of solutions across the whole pH range.     

Hydrogel/bioactive glass composites for bone regeneration applications: Synthesis and characterisation

Due to the deficiencies of current commercially available biological bone grafts, alternative bone graft substitutes have come to the forefront of tissue engineering in recent times. The main challenge for scientists in manufacturing bone graft substitutes is to obtain a scaffold that has sufficient mechanical strength and bioactive properties to promote formation of new tissue. The ability to synthesise hydrogel based composite scaffolds using photopolymerisation has been demonstrated in this study. The prepared hydrogel based composites were characterised using techniques including Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy-dispersive X-ray spectrometry (EDX), rheological studies and compression testing. In addition, gel fraction, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), porosity and swelling studies of the composites were carried out. It was found that these novel hydrogel bioglass composite formulations did not display the inherent brittleness that is typically associated with bioactive glass based bone graft materials and exhibited enhanced biomechanical properties compared to the polyethylene glycol hydrogel scaffolds along. Together, the combination of enhanced mechanical properties and the deposition of apatite on the surface of these hydrogel based composites make them an ideal candidate as bone graft substitutes in cancellous bone defects or low load bearing applications.