GutSelf: Interindividual Variability in the Processing of Dietary Compounds by the Human Gastrointestinal Tract

Nutritional research is currently entering the field of personalized nutrition, to a large extent driven by major technological breakthroughs in analytical sciences and biocomputing. An efficient launching of the personalized approach depends on the ability of researchers to comprehensively monitor and characterize interindividual variability in the activity of the human gastrointestinal tract. This information is currently not available in such a form. This review therefore aims at identifying and discussing published data, providing evidence on interindividual variability in the processing of the major nutrients, i.e., protein, fat, carbohydrates, vitamins, and minerals, along the gastrointestinal tract, including oral processing, intestinal digestion, and absorption. Although interindividual variability is not a primary endpoint of most studies identified, a significant number of publications provides a wealth of information on this topic for each category of nutrients. This knowledge remains fragmented, however, and understanding the clinical relevance of most of the interindividual responses to food ingestion described in this review remains unclear. In that regard, this review has identified a gap and sets the base for future research addressing the issue of the interindividual variability in the response of the human organism to the ingestion of foods.     

Separation of Indium from Acid Sulfate-Containing Solutions by Ion Exchange with Impregnated Resins

Indium separation using ion exchange resins from acidic polymetallic and very diluted solutions are investigated. Since the selectivity of commercial ion exchange resins have proven to be too low for an effective separation from solutions with high content of other metals, Lewatit® TP 208 was impregnated with common extractants to enhance its properties. By resin impregnation with D2EHPA and Cyanex 272, not only the selective indium recovery was reached but also the resin capacity was increased approx. two times. The best loading and elution performance were shown by Cyanex 272-impregnated Lewatit® TP 208, increasing the indium purity in the eluate from 0.75 % to 85 %.     

Quantifying the efficiency and biases of forest Saccharomyces sampling strategies

Saccharomyces yeasts are emerging as model organisms for ecology and evolution, and researchers need environmental Saccharomyces isolates to test ecological and evolutionary hypotheses. However, methods for isolating Saccharomyces from nature have not been standardized, and isolation methods may influence the genotypes and phenotypes of studied strains. We compared the effectiveness and potential biases of an established enrichment culturing method against a newly developed direct plating method for isolating forest floor Saccharomyces spp. In a European forest, enrichment culturing was both less successful at isolating Saccharomyces paradoxus per sample collected and less labour intensive per isolated S. paradoxus colony than direct isolation. The two methods sampled similar S. paradoxus diversity: The number of unique genotypes sampled (i.e., genotypic diversity) per S. paradoxus isolate and average growth rates of S. paradoxus isolates did not differ between the two methods, and growth rate variances (i.e., phenotypic diversity) only differed in one of three tested environments. However, enrichment culturing did detect rare Saccharomyces cerevisiae in the forest habitat and also found two S. paradoxus isolates with outlier phenotypes. Our results validate the historically common method of using enrichment culturing to isolate representative collections of environmental Saccharomyces. We recommend that researchers choose a Saccharomyces sampling method based on resources available for sampling and isolate screening. Researchers interested in discovering new Saccharomyces phenotypes or rare Saccharomyces species from natural environments may also have more success using enrichment culturing. We include step-by-step sampling protocols in the supplemental materials.     

Efficient Synthesis of Highly Active Phospha‐Isosteres of the Influenza Neuraminidase Inhibitor Oseltamivir

With a Hunsdiecker–Barton iododecarboxylation strategy, we converted the carboxylate group of the oseltamivir precursor into exemplary phosphonate monoesters. In all cases, K_i values towards influenza virus sialidase remained in the sub‐nanomolar range. We have thus made valuable structural space available for the design of novel oseltamivir‐based tools for influenza virus research.

     

Influence of surface active agents on the mass transfer across liquid—liquid interfaces—I. Dioxane—toluene—water-system

The instantaneons concentration of dioxane in freely suspended single toluene droplets was measured for an extremely wide range of droplet ages (0—600 sec) by means of a modified scintillation technique and the age dependence of the overall coefficients of mass transfer was evaluated. With increasing droplet age four consecutive exchange processes dominate with different decay constants for the concentration of solute which have very high, high, low, and very low exchange rates due to interfacial disturbances, turbulent internal mixing, transient internal mixing and desorption from the interface respectively.The decay constants of the first two processes decrease and the last two remain constant with increasing concentration of surface active agents. The overall decay constant decreases, goes through a minimum, increases, passes a maximum and finally decreases with increasing concentration of surface active agents. An explanation for this behaviour is given.     

Phenology of vegetation in Southern England from Envisat MERIS terrestrial chlorophyll index (MTCI) data

Given the close association between climate change and vegetation response, there is a pressing requirement to monitor the phenology of vegetation and understand further how its metrics vary over space and time. This article explores the use of the Envisat MERIS terrestrial chlorophyll index (MTCI) data set for monitoring vegetation phenology, via its estimates of chlorophyll content. The MTCI was used to construct the phenological profile of and extract key phenological event dates from woodland and grass/heath land in Southern England as these represented a range of chlorophyll contents and different phenological cycles. The period 2003–2008 was selected as this was known to be a period with temperature and phenological anomalies. Comparisons of the MTCI-derived phenology data were made with ground indicators and climatic proxy of phenology and with other vegetation indices: MERIS global vegetation index (MGVI), MODIS normalized difference vegetation index (NDVI) and MODIS enhanced vegetation index (EVI). Close correspondence between MTCI and canopy phenology as indicated by ground observations and climatic proxy was evident. Also observed was a difference between MTCI-derived phenological profile curves and key event dates (e.g. green-up, season length) and those derived from MERIS MGVI, MODIS NDVI and MODIS EVI. The research presented in this article supports the use of the Envisat MTCI for monitoring vegetation phenology, principally due to its sensitivity to canopy chlorophyll content, a vegetation property that is a useful proxy for the canopy physical and chemical alterations associated with phenological change.     

Phase Relationships and Physical Properties of Homologous Compounds in the Zinc Oxide-Indium Oxide System

Equilibrium phase relationships in the ZnO-In₂O₃ system were determined between 1100° and 1400°C using solid-state reaction techniques and X-ray diffractometry. In addition to ZnO and In₂O₃, nine homologous compounds, Zn _k In₂O _{k +3} (where k = 3, 4, 5, 6, 7, 9, 11, 13, and 15), were observed. Electrical conductivity and diffuse reflectance of the k = 3, 4, 5, 7 and 11 members were measured before and after annealing at 400°C for 1 h under forming gas (4%₂-96% N₂). Room-temperature conductivity increased as k decreased, because of increased carrier concentration as well as increased mobility. In general, transparency in the wavelength range of 450-900 nm increased as k increased. Reduction in forming gas resulted in increased conductivity and reduced transparency for all compounds measured. The highest room-temperature conductivity measured, 270 S/cm, was that of reduced Zn₃In₂O₆.     

Microstructural and High-Temperature Electrical Characterization of La<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3 − δ</Subscript>

Strontium-doped lanthanum ferrites (LSF) were studied using scanning electron microscopy (SEM), X-ray diffraction (XRD), 4-point D.C. electrical conductivity and bulk property measurements. The results were compared to those of previous studies as well as selected processing conditions. The investigation focused on effects of sintering temperature, time, atmosphere (air, O₂ and N₂) and composition of La_1–xSr_xFeO_3– (x = 0.2–0.9), on the sintering behavior, microstructural development and electrical conductivity. An oxalate precipitation method was used to prepare lanthanum ferrite powders. Simultaneous thermogravimetric and differential thermal analysis (TGA/DTA) studies found calcination temperatures of 800 and 850^C were necessary to form single-phase crystalline powders, as determined by XRD. Specimens were sintered from 1300 to 1400^C with dwell times from to 2 hrs. Results from SEM/EDS analysis showed the presence of a second phase in the samples fired in air or oxygen. The second phase was not detected by x-ray diffraction due to the small amount of material present. Samples fired in nitrogen had the lowest conductivity while those fired in oxygen had the highest. A composition of x = 0.5 resulted in the highest conductivity, 352 S/cm, at an operating temperature of 550C in air. High strontium additions (x = 0.9) lowered the linear shrinkage of LSF.