Properties of ligno‐cellulose fiber Hildegardia

Studies on some properties such as the density, the degradation temperatures, the morphology and the spectral features of the ligno‐cellulose fiber Hildegardia were carried out in both untreated and alkali treated form. The fibers are found to have good morphology and moderate initial and final degradation temperatures. On alkali treatment, the lignin was found to be eliminated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2216–2221, 2002     

Microstructural effects on the tensile properties and deformation behavior of a Ti-48Al gamma titanium aluminide

The effects of microstructure on the tensile properties and deformation behavior of a binary Ti-48Al gamma titanium aluminide were studied. Tensile-mechanical properties of samples with microstructures ranging from near γ to duplex to fine grained, near- and fully-lamellar were determined at a range of temperatures, and the deformation structures in these characterized by transmission electron microscopy (TEM). Microstructure was observed to exert a strong influence on the tensile properties, with the grain size and lamellar volume fraction playing connected, but complex, roles. Acoustic emission response monitored during the tensile test revealed spikes whose amplitude and frequency increased with an increase in the volume fraction of lamellar grains in the microstructure. Analysis of failed samples suggested that microcracking was the main factor responsible for the spikes, with twinning providing a minor contribution in the near-lamellar materials. The most important factor that controls ductility of these alloys is grain size. The ductility, yield stress, and work-hardening rate of the binary Ti-48Al alloy exhibit maximum values between 0.50 and 0.60 volume fraction of the lamellar constituent. The high work-hardening rate, which is associated with the low mobility of dislocations, is the likely cause of low ductility of these alloys. In the near-γ and duplex structures, slip by motion of 1/2<110] unit dislocations and twinning are the prevalent deformation modes at room temperature (RT), whereas twinning is more common in the near- and fully-lamellar structures. The occurrence of twinning is largely dictated by the Schmid factor. The 1/2<110] unit dislocations are prevalent even for grain orientations for which the Schmid factor is higher for <101] superdislocations, though the latter are observed in favorably oriented grains. The activity of both of these systems is responsible for the higher ductility at ambient temperatures compared with Al-rich single-phase γ alloys. A higher twin density is observed in lamellar grains, but their propagation depends on the orientation and geometry of the individual γ lamellae. The increase in ductility at high temperatures correlates with increased activity of 1/2<110] dislocations (including their climb motion) and twin thickening. The role of microstructural variables on strength, ductility, and fracture are discussed. This article is based on a presentation made in the symposium entitled “Fundamentals of Structural Intermetallics,” presented at the 2002 TMS Annual Meeting, February 21–27, 2002, in Seattle, Washington, under the auspices of the ASM and TMS Joint Committee on Mechanical Behavior of Materials.     

An alternative explicit formulation for the DKT plate-bending element

The stiffness matrix for the DKT plate-bending element is formulated explicitly in a global co-ordinate system. This approach avoids transformations of stiffness, and elasticity properties for anisotropic materials, from local to global co-ordinates, which were required in previous formulations. A FORTRAN listing of the algorithm is appended for potential users.     

Determinants of research productivity

Earlier researchers like Turkeli, suggested that ‘the factors which determine the productivity of scientists are admittedly complex and perhaps not amenable to real scientific analysis′. The present investigation was designed with the sole purpose of confronting such a complex problem. Nearly 200 variables influencing research productivity were collected through relevant literature, analysis of biographies of great scientists, and discussion with eminent scientists. Finally, through a critical examination, 80 variables were selected for the use of Q-sort technique. The sample for the study consisted of a cross section of scientists ranging from Fellows of Indian National Science Academy to young agricultural scientists. Mailed questionnaires and personal interview methods were used for collecting data. Out of a total of 912 respondents, reply was obtained from 325. On the basis of Q-sorted data, 26 variables were selected for further analysis and they were subjected to principal component factor analysis. The results indicated eleven factors affecting research productivity of scientists. They were: persistence, resource adequacy, access to literature, initiative, intelligence, creativity, learning capability, stimulative leadership, concern for advancement, external orientation, and professional commitment.     

Out-of-Field Hippocampus from Partial-Body Irradiated Mice Displays Changes in Multi-Omics Profile and Defects in Neurogenesis

The brain undergoes ionizing radiation exposure in many clinical situations, particularly during radiotherapy for brain tumors. The critical role of the hippocampus in the pathogenesis of radiation-induced neurocognitive dysfunction is well recognized. The goal of this study is to test the potential contribution of non-targeted effects in the detrimental response of the hippocampus to irradiation and to elucidate the mechanisms involved. C57Bl/6 mice were whole body (WBI) or partial body (PBI) irradiated with 0.1 or 2.0 Gy of X-rays or sham irradiated. PBI consisted of the exposure of the lower third of the mouse body, whilst the upper two thirds were shielded. Hippocampi were collected 15 days or 6 months post-irradiation and a multi-omics approach was adopted to assess the molecular changes in non-coding RNAs, proteins and metabolic levels, as well as histological changes in the rate of hippocampal neurogenesis. Notably, at 2.0 Gy the pattern of early molecular and histopathological changes induced in the hippocampus at 15 days following PBI were similar in quality and quantity to the effects induced by WBI, thus providing a proof of principle of the existence of out-of-target radiation response in the hippocampus of conventional mice. We detected major alterations in DAG/IP3 and TGF-β signaling pathways as well as in the expression of proteins involved in the regulation of long-term neuronal synaptic plasticity and synapse organization, coupled with defects in neural stem cells self-renewal in the hippocampal dentate gyrus. However, compared to the persistence of the WBI effects, most of the PBI effects were only transient and tended to decrease at 6 months post-irradiation, indicating important mechanistic difference. On the contrary, at low dose we identified a progressive accumulation of molecular defects that tended to manifest at later post-irradiation times. These data, indicating that both targeted and non-targeted radiation effects might contribute to the pathogenesis of hippocampal radiation-damage, have general implications for human health.     

Sodium alginate–poly(hydroxyethylmethacrylate) interpenetrating polymeric network membranes for the pervaporation dehydration of ethanol and tetrahydrofuran

Interpenetrating polymeric network (IPN) membranes of sodium alginate (NaAlg) and various amounts of poly(hydroxyethylmethacrylate) (PHEMA) have been prepared and tested for the pervaporation dehydration of ethanol and tetrahydrofuran (THF). The presence of hydrophilic PHEMA in the IPN matrix was found to be responsible for increase in membrane selectivity to water. NaAlg–PHEMA IPN membrane containing 20 wt % of PHEMA exhibited a selectivity of 571 to water for the water–ethanol mixture and 857 for water–THF mixture. These data are much better than those observed for the pristine NaAlg membrane. However, flux of the IPN membranes was smaller than that of pristine NaAlg membrane. Comparatively higher flux values were observed for water–THF mixture than for water–ethanol mixture. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3324–3329, 2006     

Abutilon indicum Seed Oil — Characterisation of HBr-Reactive Acids

The seed oil of Abutilon indicum (Malvaceae) contains three HBr-reactive fatty acids. These are shown to be cis-12,13-epoxyoleic (vernolic) acid, 1.6% 9,10-methylene-octadec-9-enoic (sterculic) acid, 0.9%; as well as 8,9-methylene-heptadec-8-enoic (malvalic) acid, 2.3%. Quantitative results are obtained by combining informations about the HBr-titration, the preparative thin layer separation of oxygenated and non-oxygenated acids, and gas liquid chromatographic analysis.     

Preparation and characterization of novel semi‐interpenetrating 2‐hydroxyethyl methacrylate‐g‐chitosan copolymeric microspheres for sustained release of indomethacin

A novel semi‐interpenetrating (semi‐IPN) graft copolymer of 2‐hydroxyethyl methacrylate (HEMA) with chitosan (CS) has been prepared in the form of microspheres, using water‐in‐oil (W/O) emulsion technique. Microspheres were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X‐ray diffractometry (X‐RD) to confirm the crosslinking and polymorphism of indomethacin (IDM). The X‐RD and DSC techniques indicated a molecular‐level dispersion of IDM in the IPN matrix. Scanning electron micrographs (SEM) taken at the cross section of the microspheres have shown rough surfaces around the microspheres. The sustained release characteristics of the matrices for IDM, an anti‐inflammatory drug, were investigated in pH 7.4 media. Particle size and size distribution of the microspheres were studied by laser light diffraction particle size analyzer. The drug was released in a sustained manner for up to 12 h. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006