Perceived race-based discrimination, employment status, and job stress in a national sample of black women: implications for health outcomes

This study examined concordance between self-reported drug use and urinalysis data among 341 applicants for methadone treatment in Sydney, Australia. Rates of under-reporting of use of specific drugs were low (0% to 10%). Irregular drug use, short half-life of some abused drugs, and relatively low sensitivity of the TLC assay procedure led to most detected drugs being found in only one of two urine samples collected. Subjects reported having recently used nearly twice as many drugs as were detected in their urine. Agreement (kappa) between self-report and urinalysis results was in the fair to good range for most drugs. None of the six predictors of misreporting examined were found to be of practical value.     

Restoration challenges for urban rivers.

Urban sources account for significant quantities of important diffuse pollutants, and urban watercourses are typically badly polluted. As well as toxic metals, hydrocarbons including PAHs, and suspended matter, priority urban pollutants include faecal pathogens and nutrients. Can urban watercourses be restored by sufficient reductions in pollution loads? Case studies in the UK and Sweden provide insights and some grounds for optimism. A major trans-Atlantic review of the performance of best management practices (BMPs) is informing BMP planning. New approaches such as the maximisation of self-purification capacity in the receiving waters may also need to be developed, alongside BMPs at source. Other initiatives in Europe, USA and China, including collaborative projects, are trying to address the intractable issues such as persistent pollutants from transport and urban infrastructure. The challenge is daunting, but there are clear ways forward and future research needs are evident.     

Optimization Models for Layout and Pipe Design for Storm Sewer Systems

Optimization models are developed for simultaneously determining the pipe layout and the pipe design for storm sewer systems. The pipe design process includes computation of commercial diameters, slopes, and crown elevations for the storm sewer pipes. The optimization models aim to minimize the total costs of the layout and the pipe design for most of system elements. The optimization models are formulated as a 0–1 Integer Nonlinear Programming problem and solved using the General Algebraic Modeling System without the use of heuristic models which were characteristic of all previous models for the simultaneous determine of the pipe layout and pipe design of sewer networks. The models are based upon two different optimization approaches: (1) considers one or more commercial diameters of pipe connecting two manholes and (2) considers only one commercial diameter in a pipe connecting two manholes. The commercial diameters, pipe slopes, crown elevations, and total costs of the storm sewer system were compared for the two approaches using an example that illustrates the savings in cost by allowing multiple pipe sizes. The two new optimization modeling approaches developed herein can simultaneously determine the minimum cost pipe design (commercial diameters, slopes, and crown elevations) and pipe layout of storm sewer systems and satisfy all design constraints.

     

Mark-Houwink-Sakurada coefficients for conventional poly(methyl methacrylate) in tetrahydrofuran

Summary Intrinsic viscosities [] in tetrahydrofuran (THF) at 30°C are reported for ten narrow molecular weight distribution poly(methyl methacrylate) (PMMA) samples covering nearly two orders of magnitude in molecular weight. By combining the viscosity results with absolute weight-average molecular weights determined via low-angle laser light scattering (LALLS) experiments, we have accurately determined the Mark-Houwink-Sakurada (MHS) parameters for this polymer-solvent pair (K=7.56x10⁵ and a=0.731, when [] is in dL g^-1).     

Synthesis and chain flexibility of poly(cyclohexylethyl methacrylate)

The synthesis and characterization of fractions of poly(cyclohexylethyl methacrylate) (PCHEM) are reported. A combination of low-angle laser light scattering and intrinsic viscosity experiments was employed to estimate the characteristic ratio (C_∞) of this polymer. The value of 10.7 obtained for PCHEM is similar to the value of 11.3 found previously for poly(phenylethyl methacrylate) but is smaller than values measured for poly(cyclohexyl methacrylate) and poly(cyclohexylmethyl methacrylate) (C_∞ = 11.6 and 11.9, respectively). Received: 28 October 1996/Revised: 16 December 1996/Accepted: 19 December 1996     

Dilute solution properties of randomly branched poly(methyl methacrylate)

Randomly branched poly(methyl methacrylate) samples were prepared by copolymerization with different amounts of ethylene dimethacrylate. The molecular weight distributions, radius of gyration distributions, and intrinsic viscosity distributions were measured by size exclusion chromatography with refractive index, multiangle light-scattering, and viscosity detectors. The effect of branching on the radius of gyration was compared with the effect on the intrinsic viscosity. It was found that the intrinsic viscosity contraction factor gⁱ scales with the radius of gyration contraction factor g, with the exponent, ϵ, having a value in the range 0.8–1.0. © 1996 John Wiley & Sons, Inc.     

Three-dimensional simulation of the coupled convective, conductive, and radiative heat transfer during decay heat removal in an HTR

A three-dimensional model has been constructed to simulate the passive heat removal in a modular prismatic-block high temperature reactor during a loss of active cooling accident. This model, developed using the STAR-CD general computational fluid dynamics code, solves the combined conductive, convective, and radiative heat transfer within a 30° section of the core and reactor vessel. To accommodate the different spatial scales, it uses homogeneous equivalent media to represent the coolant flow and the prismatic fuel blocks. A customized procedure that manages solving alternatively the dynamic and thermal fields permits the computation of very long transients, which typically are performed for 100 or more hours of simulated time.The global methodology and specific modeling procedures are explained, and key points of the CFD analysis are highlighted. Next, the results of several calculations are presented, and the physical phenomena represented are described. Two commonly investigated loss of active cooling scenarios are considered: depressurized conduction cooldown and pressurized conduction cooldown. The results for these two scenarios are compared to assess the effect of heat transfer via internal natural convection – which is negligible during the depressurized event – on the thermal behavior of the system. In addition, the evolution of the natural convection flow through the core and in the annular spaces is examined and discussed.     

The effect of ionic strength, polyphosphates type, pH, cooking temperature and preblending on the functional properties of normal and pale, soft, exudative (PSE) pork

Compared to processed meat product made from normal pork, products made from pale soft exudative (PSE) pork have higher cook loss (CL) and weaker texture. In this study interactions between a range of processing conditions (ionic strength, polyphosphate addition, polyphosphate chain length, pH, cooking temperature and time between preparation and cooking), and their effect on the texture [shear stress (SS), true shear strain (TSS)] and CL of gels made from normal and PSE pork were examined. Of the processing conditions studied, ionic strength, polyphosphate addition and polyphosphate chain length affected the functional properties of normal and PSE pork differently. Generally, the functional properties of normal pork were superior to PSE pork, with no combination of conditions making all the functional properties of PSE pork equal to those of normal pork under the same conditions. The combination of conditions that was most effective in reducing the difference between normal and PSE pork was high ionic strength in the presence of added polyphosphate. Under these conditions there was no significant difference in CL between normal and PSE pork, although the texture (SS and TSS) of the PSE pork samples was still inferior.     

Legal issues in sharing the benefits of biodiversity prospecting

The National Cancer Institute (NCI) is the US Government's principal agency for research on the prevention, diagnosis and treatment of cancer. A critical component of the Institute's mission is the identification and development of new and promising treatments for cancer and AIDS. For many years these efforts have included a program to investigate natural products for potential new therapeutic agents. In 1986, with the advent of new screening techniques, the National Cancer Institute stepped up its exploration of natural products and began world-wide collections of plants in tropical and subtropical regions. In recognition of the principles of the Biodiversity Treaty, NCI appreciates that continued access to the natural products of these countries depends on the Institute's ability to recognize the contributions of these source countries and their indigenous peoples, and to provide them adequate incentives to conserve their natural resources for the purposes of drug discovery. Accomplishing this goal presented several legal issues for the National Cancer Institute. As an agency of the US government, the NCI has an adjunct statutory mission to facilitate the transfer of technology developed through the Institute's programs into the private sector for further development and commercialization, and NCI operates under a national policy to use the patent system to transfer Federally supported research to the private domestic sector. Reliance on patent law may limit the Institute's ability to recognize the rights of source countries and their indigenous people and provide compensation for their contributions. However, other legal instruments, such as contracts, can serve as interim measures to provide compensation to source countries and indigenous populations. The National Cancer Institute's Letter of Collection agreement (LOC, formerly the "Letter of Intent'), is an example of an alternative means that "fills-in the gaps' created by patent law and through which source countries may share in the benefits of natural product development.     

Optimization of Co-content in C14 Laves phase multi-component alloys for NiMH battery application

The structural, electrochemical, and gas phase hydrogen storage properties of predominantly C14 crystalline phase alloys with partial replacement by Co (up to 2.5 at%) are reported. Minor phases, including C15 and cubic TiNi, were found by X-ray diffraction and contributed to the improved hydrogen diffusion through the alloy. The optimal Co-content of between 1.0 and 1.5 at% provides easy activation, high gas phase capacity, and a high discharge capacity. An optimized alloy formula also provided the smallest metallic nickel cluster size embedded in the surface oxide and the largest number of nickel clusters. In sealed cell studies, a Co-content of 1.5% gives the best performance in formation, cycle life, and charge retention, but has worse specific power and low temperature performance than some other compositions. The high-rate dischargeabilities at lower rates were found to be limited by surface reactions, not bulk diffusion.