Synthesis and characterization of biocompatible hydroxyapatite coated ferrite

Ferrite particles coated with biocompatible phases can be used for hyperthermia treatment of cancer. We have synthesized substituted calcium hexaferrite, which is not stable on its own but is stabilized with small substitution of La. Hexaferrite of chemical composition (CaO)_0.75(La₂0₃)_0.20(Fe₂O₃)₆ was prepared using citrate gel method. Hydroxyapatite was prepared by precipitating it from aqueous solution of Ca(NO₃)₂ and (NH₄)₂HPO₄ maintaining pH above 11. Four different methods were used for coating of hydroxyapatite on ferrite particles. SEM with EDX and X-ray diffraction analysis shows clear evidence of coating of hydroxyapatite on ferrite particles. These coated ferrite particles exhibited coercive field up to 2 kOe, which could be made useful for hysteresis heating in hyperthermia. Studies by culturing BHK-21 cells and WBC over the samples show evidence of biocompatibility. SEM micrographs and cell counts give clear indication of cell growth on the surface of the sample. Finally coated ferrite particle was implanted in Kasaulli mouse to test its biocompatibility. The magnetic properties and biocompatibility studies show that these hydroxyapatite coated ferrites could be useful for hyperthermia.     

Effect of race on outcome after kidney and kidney-pancreas transplantation in type 1 diabetic patients

OBJECTIVE: The racial impact on graft outcome is not well defined in diabetic recipients. The purpose of this study is to analyze our experience with kidney-alone (A) and kidney-pancreas (KP) transplantation in type 1 diabetic recipients and evaluate the impact of racial disparity on outcome. RESEARCH DESIGN AND METHODS: The records of 217 kidney transplants (118 KA, 99 KP) performed on type 1 diabetic patients between 1985 and 1995 at the Medical University of South Carolina and the University of Texas Medical Branch were reviewed. RESULTS: A total of 53 (31%) white patients and 15 (33%) black patients experienced at least one episode of biopsy-proven acute rejection of the renal graft (NS). Patient survival at 1, 2, and 5 years was similar in white (92, 87, 69%) and black (91, 91, 69%) patients (NS). Kidney graft survival at 1, 2, and 5 years in the KA group was 72, 62, and 42% in blacks, compared with 79, 76, and 53% in whites (NS). Kidney graft survival at 1, 2, and 5 years in the KP group was 92, 92, and 74% in blacks, compared with 83, 77, and 58% in whites (NS). Pancreas graft survival at 1, 2, and 5 years was 81, 81, and 81% in blacks, compared with 81, 75, and 62% in whites (NS). Cox regression analysis revealed that donor age > or = 40 years increased the risk of renal graft failure 6.2-fold (P = 0.0001), whereas the addition of a pancreas transplant to a kidney and a living-related transplant decreased the risk of failure of the kidney graft 0.2 (P = 0.005) and 0.1 times (P = 0.005). CONCLUSIONS: Our results suggest that when compared with whites, there may be a trend toward an improved kidney and pancreas graft outcome in blacks undergoing KP transplants. These findings suggest that diabetes may override the risk factors that account for the pronounced disparity in outcome observed between nondiabetic white and black recipients.     

A transmit/receive IF chip set for WCDMA mobiles in 0.35 /spl mu/m CMOS

An implementation of the IF section of WCDMA mobile transceivers with a set of two chips fabricated in an inexpensive 0.35-/spl mu/m two-poly three-metal CMOS process is presented. The transmit/receive chip set integrates quadrature modulators and demodulators, wide dynamic range automatic gain control (AGC) amplifiers, with linear-in-decibel gain control, and associated circuitry. This paper describes the problems encountered and the solutions envisaged to meet stringent specifications, with process and temperature variations, thus overcoming the limitations of CMOS devices, while operating at frequencies in the range of 100 MHz-1 GHz. Detailed measurement results corroborating successful application of the new techniques are reported. A receive AGC dynamic range of 73 dB with linearity error of less than /spl plusmn/2 dB and spread of less than 5 dB for a temperature range of -30/spl deg/C to +85/spl deg/C in the gain control characteristic has been measured. The modulator measurement shows a carrier suppression of 35 dB and sideband/third harmonic suppression of over 46 dB. The core die area of each chip is 1.5 mm/sup 2/.     

Function dependent fully testable programmable logic array

Two techniques for designing function-dependent easily testable programmable logic arrays are presented. The techniques can detect all the multiple stuck-at, crosspoint and bridging faults, as compared with most of the existing techniques where some of the faults, especially bridging faults, remain undetected.<>     

Hydrothermal upgrading of wood biomass: Influence of the addition of K2CO3 and cellulose/lignin ratio

The hydrothermal treatment of two different wood biomass samples such as cherry (hard wood) and cypress (soft wood), whose composition is different i.e. lignin, cellulose and hemicellulose were performed at 280 °C for 15 min with aq. K₂CO₃ with different concentrations (0–1 M). The soft wood biomass contains higher lignin content than hard wood biomass. The cellulose rich cherry wood biomass produced higher proportion of acetic acid than cypress. The lignin rich cypress produced the hydrocarbons with major portion of phenolic hydrocarbons and derivatives than cherry. The total oil yields from both cherry and cypress wood biomass produced 50 wt% of liquid hydrocarbons at 280 °C for 15 min with 0.5 M K₂CO₃ solution. The volatility distribution of liquid hydrocarbons showed the characteristic features of soft and hard wood biomasses.     

TES modeling for analysis of a video multiplexer

The transport of video images is likely to be a major application of high-speed networks of the future. These applications are capable of utilizing the high bandwidths that will become available with the advent of B-ISDN. In this paper, we propose a new methodology (called TES) for modeling the frame bitrate stream generated by compressed video sources. The main characteristic of this method is that it can model an arbitrary marginal distribution and approximate the autocorrelation structure of the random bitrate process generated by compressed frames. We present a modeling example utilizing this method, based on data from a video coding algorithm employing a layering technique. Using the source model, we develop a simulation model of a multiplexer of video sources. We show that this model can be used to address a number of design issues that arise in this class of problem. In particular, we show that for a layered video coding algorithm, it is possible to have a gain in the number of sources multiplexed at the cost of some loss of low priority packets.     

Plastic deformation of forearm

The unusual occurrence of plastic deformation in an adult is described.