Mechanical properties of sinter-forged Al2O3-ZrO2 ceramics

Two kinds of composites, Al₂O₃-25 wt% ZrO₂(2 mol% Y₂O₃) (Y-ZTA), Al₂O₃-25 wt% ZrO₂(8 mol% CeO₂) (Ce-ZTA) were produced by the sinter-forging process. The effect of presintering temperature on the mechanical properties of the composites was examined. The sinter-forging process increased the room-temperature bending strength in comparison with pressureless sintering, owing to the smaller grain size in sinter-forged bodies than in pressureless sintered ones. It was found necessary to keep the presintering temperature considerably lower than sinter-forging temperature in order to improve the room-temperature strength. The strength of sinter-forged Ce-ZTA was higher than that of sinter-forged Y-ZTA. The residual surface compressive stress induced by the phase transition during grinding in Ce-ZTA was found to be effective to further improve the strength and fracture toughness.     

Surgical navigation by autostereoscopic image overlay of integral videography

This paper describes an autostereoscopic image overlay technique that is integrated into a surgical navigation system to superimpose a real three-dimensional (3-D) image onto the patient via a half-silvered mirror. The images are created by employing a modified version of integral videography (IV), which is an animated extension of integral photography. IV records and reproduces 3-D images using a microconvex lens array and flat display; it can display geometrically accurate 3-D autostereoscopic images and reproduce motion parallax without the need for special devices. The use of semitransparent display devices makes it appear that the 3-D image is inside the patient's body. This is the first report of applying an autostereoscopic display with an image overlay system in surgical navigation. Experiments demonstrated that the fast IV rendering technique and patient-image registration method produce an average registration accuracy of 1.13 mm. Experiments using a target in phantom agar showed that the system can guide a needle toward a target with an average error of 2.6 mm. Improvement in the quality of the IV display will make this system practical and its use will increase surgical accuracy and reduce invasiveness.     

Estrogen alleviates cognitive dysfunction following transient brain ischemia in ovariectomized gerbils

Acute hepatic failure models with extensive hepatic necrosis and hyperammonemia were developed in small animals. One model is bases on the retrograde infusion of ethanolamine oleate into the common bile duct of guinea pigs and another is based on the infusion of TNF-lipiodol emulsion into the portal tract of rats.     

Aggregation arrestant pheromone of the German cockroach,Blattella germanica (L.) (Dictyoptera: Blattellidae): Isolation and structure elucidation of blattellastanoside-A and -B

The aggregation pheromone of the German cockroach,Blattella germanica, consists of attractant and arrestant, which can be detected by olfactometer and choice-chamber assay, respectively. Both were extracted from the frass-contaminated filter paper being used as a shelter. They were separated by solvent partition withn-butanol and water. The arrestant from then-butanol phase was purified by open column chromatography and then successive HPLC isolated two major arrestant components. Spectral evidence from SI-MS, HR-EI-MS, and NMR experiments with pulse techniques provided possible structures as 1-(6-chloro-4,5-epoxy-5-stigmast-3-yl)--d-glucopyranoside and 1-(6-chloro-5-hydroxy-5-stigmast-3-yl)--d-glu-copyranoside, denoted as blattellastanoside-A and blattellastanoside-B, respectively. They represented arrestant activity as median effective doses (ED₅₀) at 0.044 (A) and 3.2 (B) nmol on 1.0 cm² of Whatman No. 1 filter paper.     

Application of functionally graded material for solid insulator in gaseous insulation system

Functionally graded materials (FGM) have spatial distribution of a material property in order to achieve efficient stress control. An application of the FGM to a solid insulator (spacer) for a gaseous insulation system, like gas insulated switchgear, is expected to improve electric field (E-field) distribution around the spacer. In this paper, we describe the applicability of the FGM spacer to gas insulated power equipment. In the FGM spacer, we gave spatial distribution of dielectric permittivity to control the E-field distribution inside and outside the spacer. This paper includes following key results for the applications of the FGM. Firstly, E-field simulation results when applying the FGM by a finite element method are presented, in which we show the effective reduction of the maximum field strength by applying the FGM. Next, a fabrication technique of the FGM spacer sample with not only step-by-step but also continuous changes of permittivity is presented by use of centrifugal force. Finally, dielectric breakdown tests using FGM samples which are accurately controlled the spatial distribution of permittivity are carried out under lightning impulse voltage applications. The test result indicates the increase of breakdown voltage (BDV). From these results, we verified the applicability and the fabrication technique of FGM spacer for improvement of the dielectric strength in the gaseous insulation system.     

High-power CW deep-UV coherent light sources around 200 nm based on external resonant sum-frequency mixing

We report pure continuous-wave (CW) high-power (>100 mW) deep-ultraviolet (DUV) light sources emitting around 200-nm spectral region based on singly resonant sum-frequency mixing (SRSFM). Efficient DUV generation is made possible by use of a Brewster-cut CsLiB/sub 6/O/sub 10/ (CLBO) crystal near noncritically phase-matched (NCPM) condition for the SFM of 1-/spl mu/m output of neodymium lasers. The CW radiation of fifth-harmonic wavelength of a neodymium laser at 213 nm was generated by the SFM of enhanced 1064-nm radiation with single-passing 266-nm radiation produced by external-resonant frequency doubling of a 532-nm green laser. With 1.8 W of 266-nm radiation incident upon a CLBO crystal, as much as 180 mW of CW 213-nm power has been produced. The sub-200-nm CW radiation with 140-mW power has also been achieved by SFM of 1064 nm with 244-nm radiation from a frequency-doubled Argon-ion laser in the CLBO crystal operated near the NCPM condition.     

The structure of the core polyol of the ether lipids fromSulfolobus acidocaldarius

The major ether-type lipid structures ofSulfolobus acidocaldarius (ATCC33909) were composed of caldarchaeol and calditoglycerocaldarchaeol. However, the characterization by nuclear magnetic resonance spectroscopy and mass spectrometry showed that the structure of calditol in calditoglycerocaldarchaeol is not nonitol, 2-(1′,2′,3′-trihydroxypropyl)1,2,3,4,5,6-hexahydroxyhexane, but 2-hydroxymethyl-1-(2,3-dihydroxypropoxy),2,3,4,5-cyclopentanetetraol with an ether linkage in the molecule. Such an intermolecular ether linkage was resistant, to BCl₃ treatment, but nonresistant to 57% HI degradation treatment conducted at 100°C for 60 h, producting 2-hydroxymethyl-1,2,3,4,5-cyclopentanepentaol from calditol as reaction product. Further, it was confirmed that the structure of calditol is essentially a derivative of glycerol, and hydrocarbon chains were conjugated to the glycerol-like site in the structure. The calditol with an ether linkage in the molecule suggested an important role regarding the properties of heat-resistance and acid-resistance observed inSulfolobales. Presented at the international workshop on “Molecular Biology and Biotechnology of Extremophiles and Archaebacteria,” Wako, Japan, August 1993.