Connection‐Strength Estimation of Neuronal Networks by Fitting for Izhikevich Model

Recently, there has been abundant research using multineuron recording, but there are many problems with extracting the features from the obtained spike time series, which are huge in volume and complex. Here we introduce a new method of estimating synaptic connection strengths between neurons by fitting to the Izhikevich model by maximum likelihood estimation. We demonstrate that our method can estimate connection strengths from spike time series given by a simulated neural ensemble and can estimate nonconnectivity between two independent cultured neuronal networks. These results suggest that our method is applicable to network and plasticity analysis of neuronal networks.     

Investigation of Water Tree Degradation in Dry‐Cured and Extruded Three‐Layer (E‐E Type) 6.6‐kV Removed XLPE Cables

Dry‐cured and extruded three‐layer (E‐E type) 6.6‐kV cross‐linked polyethylene (XLPE) cables were introduced into electric power systems more than 30 years ago, but they do not experience failures because of water tree degradation. Also, the degradation index of water treeing for these cables has not been established. Therefore, investigating results of residual breakdown voltage and water tree degradation of these cables will help us plan for cable replacement and determine water tree degradation diagnosis scheduling, and will be fundamental data for cable lifetime evaluation. In this study, the authors measured the ac breakdown voltages of dry‐cured and E‐E type 6.6‐kV XLPE cables removed after 18 to 25 years of operation and observed the water trees in their XLPE insulation. As a result, it was observed that breakdown voltages were larger than the maximum operating voltage (6.9 kV) and the ac voltage for the dielectric withstanding test (10.3 kV). Water trees were mainly bow‐tie water trees and their maximum length was approximately 1 mm. Although the number of measured cables was limited, the lifetime of this type of cable was estimated to be approximately 40 years, even experiencing water immersion.     

DNA ANALYSIS FOR IDENTIFICATION OF FOOD-ASSOCIATED FOREIGN SUBSTANCES

To identify food‐associated foreign substances, a DNA analysis consisting of 18S rDNA sequencing and homology search analysis has been developed. In this method, we designed universal primer pairs for specific amplification of animal and plant 18S rDNA and constructed an original DNA database storing partial 18S rDNA sequences of 222 organisms commonly used for culinary purposes. In the model experiments, food materials were successfully identified, indicating that our DNA analysis method can be practically applied to the identification of food‐associated foreign substances. It is also expected that this method complements conventional morphological and compositional analysis, leading to more accurate and reliable identification of food‐associated foreign substances.     

Preparation of Lanthanum Nickel Oxide-Coated Ni Sheet Anodes and Their Application to Electrolytic Production of (CF3)3N in (CH3)4NF·4.0HF Melt

A new process for electrolytic production of a perfluorinated compound, (CF₃)₃N, using lanthanum nickel oxide-coated Ni sheet anode in the (CH₃)₄NF·4.0HF melt at room temperature, was developed. Thin films of the lanthanum nickel oxides were prepared on Ni sheets by sol-gel coating method using polyvinlylpyrrolidone(PVP). The main components of the thin films were La₂O₃, LaNiO₃, and La₂NiO₄ at 500, 750 and 1000 °C, respectively. The anode performance in the (CH₃)₄NF·4.0HF melt depends greatly on the main component of the thin film, and the LaNiO₃-coated Ni sheet anode gives the best anode performance. The potential of LaNiO₃-coated Ni sheet anode remains constant at 5.9 V during electrolysis at 20 mA·cm⁻² in the (CH₃)4NF·4.0HF melt for 100 h. This is because LaNiO₃ and NiF₃, and/or Ni₂F₅, the latter of which was formed during electrolysis, in the film give a high electronic conductivity to the surface film during electrolysis. The maximum mole fraction of (CF₃)₃N (21.4%) was obtained at 20 mA·cm⁻² in (CH₃)₄NF·4.0HF melt using the LaNiO₃-coated Ni sheet.     

Computationally Efficient Large-Eddy Simulation of Periodic Unsteady Flow using Harmonic Balance Method

To improve the efficiency and fidelity of the numerical analysis for cascade flutter, we propose an efficient scale-resolving simulation method dedicated to time-periodic flows by incorporating the harmonic balance approach into the large-eddy simulation. This method combined convergence calculations of the steady-state problem based on the harmonic balance method for periodic components, and the nonlinear time-marching method for turbulent fluctuations. Using the proposed method, deterministic periodic components and stochastic turbulent fluctuations were calculated simultaneously, and the effect of turbulent fluctuations on deterministic periodic components was directly calculated without using turbulence models. In this paper, we explain the algorithm and feature of this simulation technique and present the results of the computation for channel flow excited in the streamwise direction as an analysis example using the proposed method. In order to validate the proposed method, an analysis of sinusoidally pulsating channel flow at the central friction-velocity Reynolds numbers Rer = 180 was conducted, confirming that the amplitude and phase of the mean velocity oscillation computed by the proposed method were in good agreement with those of the conventional LES. The present calculation achieved an order of magnitude improvement in computational efficiency compared to conventional LES.     

Performances of metal fluoride added carbon anodes with pre-electrolysis for electrolytic synthesis of NF3

Metal fluoride added carbon anodes treated by pre-electrolysis were investigated for electrolytic production of nitrogen trifluoride (NF₃) in molten NH₄F·KF·4HF at 100 °C. The conditions for pre-electrolysis were first optimized using a graphite sheet anode as a model anode. The formation of fluorine-graphite intercalation compounds (fluorine-GICs) with semi-covalent C–F bonds, (C_xF)_n, on the MgF₂ and CaF₂ added carbon anode surface was accelerated by pre-electrolysis at potentials less than 4.0 V. Critical current densities (CCD) on the MgF₂ added carbon anodes pre-electrolyzed under various conditions were determined, and the highest CCD was 290 mA cm⁻² obtained for that pre-electrolyzed at 3.5 V for 500 C cm⁻². This anode was successfully used in the electrolysis at 100 mA cm⁻² for 290 h and the maximum NF₃ current efficiency was 55%. From these results, it was concluded that the metal fluoride added carbon anode treated by pre-electrolysis has a high potential for electrolytic production of NF₃ at higher current density.     

Basic Study on Islanding Detection Method for PV Systems by Harmonic Impedance Detection in Case of Including Induction Motor in Load System

It is important that photovoltaic (PV) systems detect islanding caused by power system faults to ensure electrical safety. Thus we propose a novel islanding detection method which detects the harmonic impedance by injecting harmonic currents synchronized with the exciting current harmonics of the pole transformer. For the case in which an induction motor load is included in the load system, basic experiments on islanding detection and simulation analysis are conducted to verify the effectiveness of the proposed method.