Crystal orientation of β-phase isotactic polypropylene induced by magnetic orientation of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide

Melt crystallization of isotactic polypropylene (iPP), containing crystallites of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide (DCNDCA) as a nucleating agent of the the β-phase iPP crystal, is carried out under a magnetic field (6 T) to obtain the alignment of the iPP crystal induced by magnetic alignment of DCNDCA. In a previous paper, DCNDCA was reported to undergo magnetic alignment in a liquid suspension. The obtained iPP sample exhibits alignment of the β-phase crystal with the c-axis aligned perpendicular to the magnetic field. The comparison of this alignment of iPP with the reported magnetic alignment of DCNDCA indicates that the β-phase crystal grows epitaxially on the DCNDCA crystal. The (330)_β plane of the iPP crystal lies on the bc-plane of the DCNDCA crystal in which the direction of the c-axis of the iPP coincides with the direction of the b-axis of the DCNDCA crystal.     

Two-step design of critical control systems using disturbance cancellation integral controllers

An efficient critical control system design is proposed in this paper. The key idea is to decompose the design problem into two simpler design steps by the technique used in the classical loop transfer recovery method (LTR). The disturbance cancellation integral controller is used as a basic controller. Since the standard loop transfer recovery method cannot be applied to the disturbance cancellation controller, the nonstandard version recently found is used for the decomposition. Exogenous inputs with constraints both on the amplitude and rate of change are considered. The majorant approach is taken to obtain the analytical sufficient matching conditions. A numerical design example is presented to illustrate the effectiveness of the proposed design.     

Predictive Simulation of Deformation and Failure of Peat-Calcareous Soil Layered Ground Due to Multistage Test Embankment Loading

The continuous behaviour of a ground-embankment system from the stage of deformation up to failure was predicted with respect to an actual test embankment that had been constructed in stages on a soft ground made up of peat and calcareous soil. The behaviour prediction was carried out by employing soil-water coupled finite deformation analysis, which also included simulation of the embankment construction process. The information used in the analysis was limited to such things as the results of soil tests on soil materials (peat and calcareous soil) sampled from the ground, including their sensitivity ratios, and the embankment's construction history. The SYS Cam-clay model was used in the constitutive equations of the soils to determine the material constants of the soils and the initial conditions of the ground, and the computations were performed under plane strain conditions. As a result, the computed profiles of W-type ground settlement and of slip surfaces running through the embankment were found to be in good overall agreement with the actual profiles measured at the site. Furthermore, we found that this slippage is attributable to the undrained shear response of the soil elements in the calcareous soil layer, where slippage begins to occur during embankment loading. In other words, the slippage is caused by the rapid softening behaviour caused by the degradation of structure after the effective stress ratio reaches the vicinity of the critical state line.     

Spatial mapping of electronic states in κ-(BEDT-TTF)2X using infrared reflectivity

We review our recent work on spatial inhomogeneity of the electronic states in the strongly correlated molecular conductors κ-(BEDT-TTF)₂X. Spatial mapping of infrared spectra (SMIS) is used for imaging the distribution of the local electronic states. In molecular materials, the infrared response of the specific molecular vibration mode with a strong electron–molecular vibration coupling can reflect the electronic states via the change in the vibration frequency. By spatially mapping the frequency shift of the molecular vibration mode, an electronic phase separation has been visualized near the first-order Mott transition in the bandwidth-controlled organic conductor κ-(BEDT-TTF)₂Cu[N(CN)₂]Br. In addition to reviewing SMIS of the phase separation, we briefly mention the electronic and optical properties of κ-(BEDT-TTF)₂X.     

Application of nonlinear fitting and selection of the most fitted equation by AIC in stability test of pharmaceutical ingredients

We proposed a method for objectively selecting the most fitted rate equation among candidate rate equations based on chemical kinetics by both nonlinear regression analysis and Akaike's information criterion (AIC), to express the decrease of pharmaceutical ingredient as an appropriate equation. Pseudo-zero, first, and second-order rate equations were prepared as candidates beforehand, and AIC was introduced for selecting the most fitted rate equation among the candidates. We compared the proposed method to the Weibull method that expressed any decrease patterns as a single equation.

We quantified the contents of thiamine nitrate (VB1) and taurine after storage for one, three, and six months under 40°C-75% relative humidity by high-pressure liquid chromatography. Decrease patterns of each sample were most fitted to one of the candidate rate equations, that is, pseudo-zero, first, and second-order rate equations, respectively, and the degree of fit in the most fitted equation was superior to that of the Weibull method, except for the pseudo-first-order rate equation.

Moreover, we confirmed that the proposed method was considerably precise for estimating the stability of pharmaceuticals by comparing estimated residual rates and confidence intervals to experimental data.     

Computational dynamics method for evaluating the mobility of charged biomolecules passing through the electrical potential field within the ion selective channel on an excitable membrane

A mathematical method is introduced to characterize the electrokinetic behavior (electrophoresis) of a biomolecular particle which passes through a specific channel pore on an excitable biological membrane. The basic approach was first proposed by Booth (1950). The system was described by an equation of continuity and an equation of motion in which the driving force involves the diffusion effect, the hydrostatic pressure, and the electrostatic potential. By assuming linear relations between the velocity and the applied electrical field, solutions for the potential, pressure, and velocity were given by a series expansion of the charges on the particle. To examine the influence of ions surrounding the particle and forming an ionic cloud, the Debye–Huckel parameter was introduced. As the thickness of the double layer around the particle increased, the potential, velocity, pressure, and viscosity were changed significantly. The maximum influence was obtained when the radius of the particle became equal to the thickness of the double layer. Although this theory is valid for a charged, spherical, nonconducting particle only, the method is available for evaluating the kinetic behavior of a biomolecule that passes through a channel pore on a cellular membrane.This work was presented, in part, at the 8th International Symposium on Artificial Life and Robotics, Oita, Japan, January 24–26, 2003     

Magnetic Torque Measurements on Bi2201 Single Crystal in High Magnetic Fields

The magnetic field direction dependence of the magnetic torque in the superconducting state of Bi ₂ Sr _1.65 La _0.35 CuO ₆₊ (Bi2201) single crystal has been measured in several static magnetic fields up to 200 kOe. The applied field dependence of the anisotropy parameter, , defined by the square root of the effective mass ratio has been obtained by fitting the magnetic torque curves at 17 K by means of the effective mass model. For Bi ₂ Sr ₂ CaCu ₂ O ₈₊ (Bi2212), the values up to 210 kOe were reported previously. At each field, for Bi2201 is larger than that for Bi2212. Since the value decreases as the field increases both for Bi2201 and Bi2212, the reduction of by the application of the high magnetic field is considered to be common for Bi-based layered superconductors.     

Confined‐error‐diffusion algorithm for flat‐panel display

Abstract— The reduction of a structural pattern at specific gray levels caused by digital halftone methods is the subject of this paper. This problem is more severe in some flat‐panel displays because their black levels typically are brighter than other display blocks. A patented halftone algorithm, confined error diffusion (CED), that confines the error‐carry within the dither mask is described and extended. First, the CED algorithm that dynamically applies random error diffusion or the ordered‐dither method, depending upon image content, is described in detail. Finally, we propose an advanced CED algorithm for improving the gradation characteristics of the CED algorithm. The performance of the proposed algorithms is compared to the experimental results for natural test images. In order to verify the halftone quality, a structural similarity measure for color images by taking into account the interrelation between color channels is proposed, and the results based on the proposed method, the color similarity measure method, is given.     

New DC Chopper Circuits Using Fast-Switching Reverse-Conducting Thyristors for Low-Voltage DC Motor Control

Fast- switching reverse-conducting thyristors have been developed and used in dc chopper apparatus to control the speed of highvoltage dc traction motors. The newly developed dc chopper circuit and its application for low-voltage dc motor control are discussed. The fast-switching reverse-conducting thyristor is utilized as the main thyristor to control load current.