Constant thrust programming for a multistage rocket flown in vacuum with a given initial/final thrust-to-weight ratio in an arbitrary stage

The burn time and burnout velocity of a multistage rocket flown vertically in vacuum with constant thrust tangential to the flight path and a prescribed initial/final thrust-to-weight ratio in an arbitrary stage have been determined. The present paper also deals with optimal staging under given conditions of flight.     

Algebraic immunity for cryptographically significant Boolean functions: analysis and construction

Recently, algebraic attacks have received a lot of attention in the cryptographic literature. It has been observed that a Boolean function f used as a cryptographic primitive, and interpreted as a multivariate polynomial over F/sub 2/, should not have low degree multiples obtained by multiplication with low degree nonzero functions. In this paper, we show that a Boolean function having low nonlinearity is (also) weak against algebraic attacks, and we extend this result to higher order nonlinearities. Next, we present enumeration results on linearly independent annihilators. We also study certain classes of highly nonlinear resilient Boolean functions for their algebraic immunity. We identify that functions having low-degree subfunctions are weak in terms of algebraic immunity, and we analyze some existing constructions from this viewpoint. Further, we present a construction method to generate Boolean functions on n variables with highest possible algebraic immunity /spl lceil/n/2/spl rceil/ (this construction, first presented at the 2005 Workshop on Fast Software Encryption (FSE 2005), has been the first one producing such functions). These functions are obtained through a doubly indexed recursive relation. We calculate their Hamming weights and deduce their nonlinearities; we show that they have very high algebraic degrees. We express them as the sums of two functions which can be obtained from simple symmetric functions by a transformation which can be implemented with an algorithm whose complexity is linear in the number of variables. We deduce a very fast way of computing the output to these functions, given their input.     

Nonlinear state feedback controller design for underactuated mechanical system: A modified block backstepping approach

This paper presents the formulation of a novel block-backstepping based control algorithm to address the stabilization problem for a generalized nonlinear underactuated mechanical system. For the convenience of compact design, first, the state model of the underactuated system has been converted into the block-strict feedback form. Next, we have incorporated backstepping control action to derive the expression of the control input for the generic nonlinear underactuated system. The proposed block backstepping technique has further been enriched by incorporating an integral action additionally for enhancing the steady state performance of the overall system. Asymptotic stability of the overall system has been analyzed using Lyapunov stability criteria. Subsequently, the stability of the zero dynamics has also been analyzed to ensure the global asymptotic stability of the entire nonlinear system at its desired equilibrium point. The proposed control algorithm has been applied for the stabilization of a benchmarked underactuated mechanical system to verify the effectiveness of the proposed control law in real-time environment.     

Extreme Two‐Phase Cooling from Laser‐Etched Diamond and Conformal,Template‐Fabricated Microporous Copper

This paper reports the first integration of laser‐etched polycrystalline diamond microchannels with template‐fabricated microporous copper for extreme convective boiling in a composite heat sink for power electronics and energy conversion. Diamond offers the highest thermal conductivity near room temperature, and enables aggressive heat spreading along triangular channel walls with 1:1 aspect ratio. Conformally coated porous copper with thickness 25 µm and 5 µm pore size optimizes fluid and heat transport for convective boiling within the diamond channels. Data reported here include 1280 W cm^?2 of heat removal from 0.7 cm² surface area with temperature rise beyond fluid saturation less than 21 K, corresponding to 6.3 × 10⁵ W m^?2 K^?1. This heat sink has the potential to dissipate much larger localized heat loads with small temperature nonuniformity (5 kW cm^?2 over 200 µm × 200 µm with <3 K temperature difference). A microfluidic manifold assures uniform distribution of liquid over the heat sink surface with negligible pumping power requirements (e.g., <1.4 × 10^?4 of the thermal power dissipated). This breakthrough integration of functional materials and the resulting experimental data set a very high bar for microfluidic heat removal.     

Paper mill sludge as a renewable substrate for the production of acetone-butanol-ethanol using Clostridium sporogenes NCIM 2337

In the present study, pre-treated paper mill sludge (PMS) was evaluated extensively as a substrate for production of acetone-butanol-ethanol using Clostridium sporogenes NCIM 2337. The PMS was subjected to three types of pre-treatment methods namely alkali, mechanical, and thermal treatment and was analyzed by SEM. The pre-treatment of PMS by alkali was observed to be more effective over the other pre-treatment methods. The alkali pre-treated sludge was then made to undergo fermentation, which showed the conventional process of acidogenesis followed by solventogenesis. The acetone, butanol, and ethanol concentration for 15% alkali pre-treated PMS was estimated to be maximum.     

3D unsupervised modified spatial fuzzy c-means method for segmentation of 3D brain MR image

Pattern Analysis and Applications - This paper proposed a novel 3D unsupervised spatial fuzzy-based brain MRI volume segmentation technique in the presence of intensity inhomogeneity and noise....     

Analysis of the “Wavelet Tree Quantization” watermarking strategy and a modified robust scheme

Here we study a recently proposed watermarking scheme based on the paper “Wavelet Tree Quantization” (WTQ) by Wang and Lin (IEEE Trans Image Process 13(2):154–165, 2004). In given scheme, wavelet coefficients corresponding to the same spatial locations are grouped together. Two such groups, selected at random, constitute a supertree. Some of these supertrees are quantized to embed the watermark information in the image. In the process of cryptanalysis we first identify the groups which are quantized during the watermark insertion process. Then we select the non-quantized groups and quantize them too, to remove the watermark. Experimental results show that the watermark is completely removed by this attack. The cryptanalysis falls under the cipher text only jamming attack which requires only a single watermarked copy. Further, we suitably modify the WTQ scheme to make it robust against such cryptanalytic attacks.This is an extended and revised version of the paper Cryptanalysis of “Wavelet Tree Quantization” Watermarking Scheme presented at the International Workshop on Distributed Computing, IWDC 2004, Kolkata, 27–30 December 2004, Lecture Notes in Computer Science, vol. 3326, pp. 219–230. Springer, Berlin Heidelberg New York (2004). Section 4 of this paper introduces a modified scheme which is an addition over the conference version. Part of this work has been done while the author T. K. Das was visiting Indian Statistical Institute, Kolkata during 2004.     

Responses of American readers to visual aspects of a mid-sizedJapanese company's annual report: a case study

American document design process models reflect the assumption that comprehension and usability are the most important characteristics of effective documents, but it is increasingly evident that other cultures value other communicative features of documents and that purposes and intentions vary across cultures. This case study examines the responses of four sets of American readers (three sets familiar with American document design research and practice and one set of content specialists-engineers by training) to the visual aspects of an annual report. The original document was prepared for a mid-sized Japanese corporation and published and distributed in Japan; the American version is an almost literal translation of the original document from Japanese to English, with no changes in visuals, graphic design or format. Protocol analyses of readers' responses revealed distinct patterns of expectations and preferences based on (1) cultural biases, (2) degree of familiarity with the American document design model, and (3) ignorance of Japanese culture and corporate communicative practices. This study raises questions about the effectiveness in terms of cultural sensitivity of what we have called the “American” document design process model and usability testing procedures, and calls for extensive collaborative research designed to describe and analyze current practice in international settings     

Effect of curing conditions and ionic additives on properties of fly ash-lime compacts

In the present work the reaction between fly ash and lime in fly ash-lime compacts under water curing and steam curing conditions was studied thoroughly in relation to the processing conditions. Fly ash from different sources were collected, characterized, mixed with lime in different ratios and compacted. The compacts were cured with water and steam separately. The reduction in the free CaO content in these compacts was measured as a function of curing time and curing process. Role of two ionic additives, FeCl₃ and MgCl₂, on the reaction between fly ash and lime was also investigated by measuring the free CaO content. Kinetics of these reactions was studied by determining the reaction order and rate constants with respect to the free CaO content and it was observed that the curing conditions and additives affected the reaction kinetics significantly.     

Role of V2O5 on the formation of chemical mullite from aluminosilicate precursor

Aluminosilicate precursor for the processing of mulite ceramics was synthesized chemically from inorganic salts following colloidal route. V₂O₅ was used as a sintering additive in different ratios with the precursor powder. The powder mixes were compacted and sintered at different elevated temperatures. The sintered masses were characterized by measuring the bulk density, porosity, flexural strength and fracture toughness. The extent of mullitization and final microstructure of the sintered masses were investigated by scanning electron microscopy and XRD analysis. It was observed that V₂O₅ exhibited favourable effect on the formation of properly crystallized mullite and in the improvement of different mechanical properties.