Elevated Alpha 1(I) to Alpha 2(I) Collagen Ratio in Dermal Fibroblasts Possibly Contributes to Fibrosis in Systemic Sclerosis

Systemic sclerosis (SSc) is characterized by excessive collagen deposition in the skin and internal organs. Activated fibroblasts are the key effector cells for the overproduction of type I collagen, which comprises the α1(I) and α2(I) chains encoded by COL1A1 and COL1A2, respectively. In this study, we examined the expression patterns of α1(I) and α2(I) collagen in SSc fibroblasts, as well as their co-regulation with each other. The relative expression ratio of COL1A1 to COL1A2 in SSc fibroblasts was significantly higher than that in control fibroblasts. The same result was observed for type I collagen protein levels, indicating that α2(I) collagen is more elevated than α2(I) collagen. Inhibition or overexpression of α1(I) collagen in control fibroblasts affected the α2(I) collagen levels, suggesting that α1(I) collagen might act as an upstream regulator of α2(I) collagen. The local injection of COL1A1 small interfering RNA in a bleomycin-induced SSc mouse model was found to attenuate skin fibrosis. Overall, our data indicate that α2(I) collagen is a potent regulator of type I collagen in SSc; further investigations of the overall regulatory mechanisms of type I collagen may help understand the aberrant collagen metabolism in SSc.     

Synthesis of thermoresponsive block and graft copolymers via the combination of living cationic polymerization and RAFT polymerization using a vinyl ether-type RAFT agent

A novel vinyl ether-type RAFT agent, benzyl 2-(vinyloxy)ethyl carbonotrithioate (BVCT) was synthesized for various block copolymers via the combination of living cationic polymerization of vinyl ethers and reversible addition−fragmentation chain transfer (RAFT) polymerization. The novel BVCT–trifluoroacetic acid adduct play an important role to produce well-defined block copolymers, which is both as a cationogen under EtAlCl₂ initiation system in the presence of ethyl acetate for living cationic polymerization and a RAFT agent for blocks by RAFT polymerization. The resulting polymer, poly(vinyl ether)s, by living cationic polymerization had a high number average α-end functionality (≥0.9) as determined by both ¹H NMR and MALDI-TOF-MS spectrometry. In addition, this poly(vinyl ether)s worked well as a macromolecular chain transfer agent for RAFT polymerization. The RAFT polymerization of radically polymerizable monomers was conducted in toluene using 2,2′-azobis(isobutyronitrile) at 70 °C. For example, a double thermoresponsive block copolymer (MOVE₆₁-b-NIPAM₁₅₀) consisting of 2-methoxyethyl vinyl ether (MOVE) and N-isopropylacrylamide (NIPAM) was prepared via the combination of living cationic polymerization and RAFT polymerization. The block copolymer reversibly formed and deformed micellar assemblies above the phase separation temperature (T_ps) of poly(NIPAM) block in water. This BVCT is not only functioned as an initiator, but also acted as a monomer. When BVCT was copolymerized with MOVE by living cationic polymerization, followed by graft copolymerization with NIPAM via RAFT polymerization, well-defined graft copolymers (MOVE_n-co-BVCT_m)-g-NIPAM_x (n = 62–73, m = 1–9, x = 19–214) were successfully obtained. However, no micelle formed in water above T_ps of poly(NIPAM) graft chain unlike the case of block copolymers.     

Synthetic Molecular Gear Based on Double-Decker Porphyrin Complexes

New rotary molecular machines (1 and 2) were synthetically constructed from two distinct porphyrin-based rotors, a cerium(IV) bis(porphyrinate)s double-decker (CeDD) and a porphyrinatorhodium(III)-based rotor. These rotors are adjacently mounted on rotational axes aligned to near vertical as resembling the bevel-gear-shaped structure. Structural study using NMR analysis reveals that these distinct rotors are connected through a coordination bond between rhodium(III) and a pyridyl group. At temperature from 193 to 393 K, each rotor represents rotational motion driven by heat fluctuation without decomposition into the corresponding precursors in dichloromethane-d ₂ and tetrachloroethane-d ₄. Importantly, the mechanical interaction between the teeth of these rotors is strongly dependent on the central metal atom in a DD rotor and the teeth structure in a porphyrinatorhodium(III)-based rotor. Understanding such relationship between the chemical structures and mechanical interaction is of importance for generating cooperative motion in the hybrid machinery system.     

Densification and Cell Performance of Gadolinium-Doped Ceria (GDC) Electrolyte/NiO–GDC Anode Laminates

A thin film (60 μm thick) of a gadolinium-doped ceria (GDC) electrolyte was prepared by the doctor blade method. This film was laminated with freeze-dried 42 vol% NiO–58 vol% GDC mixed powder and pressed uniaxially or isostatically under a pressure of 294 MPa. This laminate was cosintered at 1100 °–1500 °C in air for 4–12 h. The laminate warped because of the difference in the shrinkage of the electrolyte and electrode during the sintering. A higher shrinkage was measured for the electrode at 1100 °–1200 °C and for the electrolyte at 1300 °–1500 °C. The increase of the thickness of anode was effective in decreasing the warp and in increasing the density of the laminated composite. The maximum electric power density with a SrRuO₃ cathode using 3 vol% H₂O-containing H₂ fuel was 100 mW/cm² at 600 °C and 380 mW/cm² at 800 °C, respectively, for the anode-supported GDC electrolyte with 30 μm thickness.     

Hydrogen production through dry reforming of biogas using a porous electrochemical cell: Effects of a cobalt catalyst in the electrode and mixing of air with biogas

This paper reports the performance of porous Gd-doped ceria (GDC) electrochemical cells with Co metal in both electrodes (cell No. 1) and with Ni metal in the cathode and Co metal in the anode (cell No. 2) for CO₂ decomposition, CH₄ decomposition, and the dry reforming reaction of a biogas with CO₂ gas (CH₄ + CO₂ → 2H₂ + 2CO) or with O₂ gas in air (3CH₄ +?1.875CO₂ +?1.314O₂ → 6H₂ +?4.875CO +?0.7515O₂). GDC cell No. 1 produced H₂ gas at formation rates of 0.055 and 0.33?mL-H₂/(min?m²-electrode) per 1?mL-supplied gas/(min?m²-electrode) at 600?°C and 800?°C, respectively, by the reforming of the biogas with CO₂ gas. Similarly, cell No. 2 produced H₂ gas at formation rates of 0.40?mL-H₂/(min?m²) per 1?mL-supplied gas/(min?m²) at 800?°C from a mixture of biogas and CO₂ gas. The dry reforming of a real biogas with CO₂ or O₂ gas at 800?°C proceeded thermodynamically over the Co or Ni metal catalyst in the cathode of the porous GDC cell. Faraday's law controlled the dry reforming rate of the biogas at 600?°C in cell No. 2. This paper also clarifies the influence of carbon deposition, which originates from CH₄ pyrolysis (CH₄ → C + 2H₂) and disproportionation of CO gas (2CO → C + CO₂), on the cell performance during dry reforming. The dry reforming of a biogas with O₂ molecules from air exhibits high durability because of the oxidation of the deposited carbon by supplied air.     

Facile one-step route to polyaniline–silver nanocomposite particles and their application as a colored particulate emulsifier

Polyaniline–silver nanocomposites were synthesized in the form of colloidal particles by the facile one-step aqueous chemical oxidative dispersion polymerization of aniline using silver nitrate as an oxidant and poly(vinyl alcohol) as a colloidal stabilizer. Aniline monomer was oxidized by silver ions, yielding polyaniline and elemental Ag simultaneously. The synthesized nanocomposite particles were colloidally stable over 2 years and transmission electron microscopy studies indicated the production of spherical, plate and rod-shaped polyaniline–silver nanocomposite particles with a silver core–polyaniline shell morphology. The conductivity of a pressed pellet of the nanocomposite particles using the conventional four-point probe technique was 1.4 × 10^?2 S/cm at 25 °C. The nanocomposite particles behaved as a ‘colored’ particulate emulsifier for the stabilization of transparent oil-in-water emulsions.     

Reduction of in vitro allergenicity of buckwheat Fag e 1 through the Maillard-type glycosylation with polysaccharides

A major allergenic protein of buckwheat, Fag e 1 prepared from common buckwheat (Fagopyrum esculentum), was covalently linked with food-grade polysaccharides, arabinogalactan or xyloglucan through the controlled dry-heating at 60 °C under 65% relative humidity. The introduction of polysaccharide chain onto the molecular surface of Fag e 1 reduced the allergenicity of Fag e 1. The results revealed that the Maillard-type glycosylation of Fag e 1 with polysaccharides brought about a drastic reduction of the reactivity against human sera of buckwheat-allergy subjects, using immuno dot-blotting, QCM analysis and ELISA. In addition, the glycosylation of Fag e 1 yielded a great improvement of its surface functionality. Solubility of Fag e 1 at the neutral pH was substantially increased up to 13.5 times and 9.6 times by the conjugation with arabinogalactan and xyloglucan, respectively. Emulsifying properties of Fag e 1 were also improved by the glycosylation, of which both emulsifying activity and emulsion stability were more than 6 times higher than those of the native protein.