Alumina-supported catalysts for propane oxidative dehydrogenation from mixed VXM(6−X)O19 (M=W, Mo) hexametalate precursors

γ-Al₂O₃ supported vanadium oxides were modified by tungsten and molybdenum oxides in order to improve dispersion and selectivity towards olefins in propane oxidative dehydrogenation (ODH). Both vanadium–tungsten and vanadium–molybdenum catalysts were obtained by adsorption of mixed isopolyanions (VW₅O₁₉⁵⁻, V₂W₄O₁₉⁴⁻, VMo₅O₁₉⁵⁻ and V₂Mo₄O₁₉⁴⁻) from aqueous solutions. The isopolyanion solutions were characterized by UV-Vis and ⁵¹V NMR spectroscopy. Vanadium, vanadium–tungsten and vanadium–molybdenum precursors and catalysts were also characterized by UV-Vis (diffuse reflectance) and solid state ⁵¹V NMR spectroscopy. An improved selectivity to propene in the presence of tungsten and molybdenum in VO_x/γ-Al₂O₃ was observed and attributed to dilution of vanadium by tungsten or molybdenum oxides on the γ-Al₂O₃ surface.     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Giuseppe Gradenigo and his contributions to audiology

Giuseppe Gradenigo (1859-1926) was an important figure in the development of Otology. Within this paper the authors consider his background and his particular contributions to the development of various aspects of audiology.     

Influence of Al and Ni concentration on the Martensitic transformation in Cu-Al-Ni shape-memory alloys

The martensitic transformation temperatures and the types of martensitic phases have been determined in a wide concentration range of technological interest for Cu-Al-Ni shape-memory alloys (SMAs) A stability diagram of martensitic phases as a function of alloy concentration has been determined. It is found that when the aluminum content increases, the transformation changes from β ₃ ⇒ β′₃ to β ₃ ⇒ γ′₃, with an intermediate concentration range where both martensites coexist due to a β ₃ ⇒ γ′₃+β′₃ transformation. On the other hand, an increase of nickel content stabilizes the martensite β′₃, changing from a mixed β ₃ ⇒ γ′₃ + β′₃ to a single β ₃ ⇒ β′₃ transformation. Furthermore, linear relationships between M _s and Al and Ni concentrations have been obtained for all types of martensitic phases.     

墙改之路越走越宽标准严格政策绿灯

四部委发布实施<节能标准>的通知 日前,建设部、国家计委、国家经贸委、财政部联合发布了关于实施<夏热冬冷地区居住建筑节能设计标准>的通知.     

The PBD-Closure of Constant-Composition Codes

We show an interesting pairwise balanced design (PBD)-closure result for the set of lengths of constant-composition codes whose distance and size meet certain conditions. A consequence of this PBD-closure result is that the size of optimal constant-composition codes can be determined for infinite families of parameter sets from just a single example of an optimal code. As an application, the sizes of several infinite families of optimal constant-composition codes are derived. In particular, the problem of determining the size of optimal constant-composition codes having distance four and weight three is solved for all lengths sufficiently large. This problem was previously unresolved for odd lengths, except for lengths seven and eleven.     

Three cases of tuberculosis after heart transplantation in Spain

The fibrinolytic capacity of patients with acute myocardial infarction (AMI) is known to be impaired. The primary regulatory element of the fibrinolytic system is plasminogen activator inhibitor (PAI). It has been previously observed that there are 2 peaks in the plasma PAI level of AMI patients at 4h and 16h after thrombolytic therapy with recombinant tissue plasminogen activator (rtPA). Lanoteplase/SUN9216 is a mutant tPA with a biological half-life longer than that of rtPA. Thrombolytic therapy with mutant tPA or rtPA was carried out consecutively in 21 patients with AMI (8 patients as the mutant tPA group, and 13 patients as the rtPA group). The recanalization time of the mutant tPA group was significantly faster than that of the rtPA group (16.1 +/- 3.9 min vs 39.6 +/- 4.8 min, p<0.01). The PAI activity at 4h after the initiation of thrombolysis was significantly lower in the mutant tPA group than in the rtPA group (8.74 +/- 5.46IU/L vs 26.74 +/- 3.35 IU/L, p<0.01). There was a one mild peak in serial plasma PAI activity levels 24h after the initiation of thrombolysis. The results suggest that thrombolytic therapy with mutant tPA reduced the impairment of fibrinolytic capacity. The mutant tPA gives faster recanalization and lower PAI activity after successful thrombolysis, compared with rtPA.     

Temperature Dependence of the Phototransport Properties in C60 films

Solid C₆₀ is a semiconductor with very special properties which are sensitive to its preparation conditions. Very little is known about the forbidden gap states and about the recombination centers in this material. An attempt is made in this paper to deduce information on the latter from the temperature dependences of the photoconductivity and the corresponding light intensity exponent that were measured on C₆₀ films. This attempt combines a comparison of the experimental results with numerical simulation of a simple model. It is concluded that oxygen centers play a major role in the electronic structure of solid C₆₀ These centers are acceptor-like, they act as compensators to the shallow donors and they result in recombination centers which lie 0.3 eV below the conduction band edge. It is further concluded that the oxygen suppresses the well-known phase transition that occurs around 260°C by prohibiting the expansion of the lattice upon the increase of temperature.     

Multitask learning for health condition identification and remaining useful life prediction: deep convolutional neural network approach

Predicting remaining useful life (RUL) is crucial for system maintenance. Condition monitoring makes not only degradation data available for RUL estimation but also categorized health status data for health state identification. However, RUL prediction has been treated as an independent process in most cases even though potential relevance exists with health status detection process. In this paper, we propose a convolution neural network based multi-task learning method to reflect the relatedness of RUL estimation with health status detection process. The proposed method applied to the C-MAPSS dataset for aero-engine unit prognostics supported superior performances to existing baseline models.