Compatibilization of PP/elastomer/microsilica composites with functionalized polyolefins: Effect on microstructure and mechanical properties

The morphology and mechanical properties of polypropylene/elastomer/silica composites were investigated with the aim of improving stiffness and impact resistance. Two different types of silica were tested: Precipitated silica and polymer grade microsilica (silica fume). The composites were compatibilized with commercial polypropylene and polyethylene containing maleic anhydride functionality as a means of controlling their microstructure and ultimately their mechanical properties. Comparisons were made with surface coated silica and hydroxyl-functionalized copolymers prepared with metallocene catalysts. The effect of adding the polymeric compatibilizers was assessed by morphology studies, thermal analysis and mechanical testing. Significant improvements in impact strength were obtained by tailoring the microstructure of polypropylene/elastomer/microsilica composites. With introduction of PP-g-MAH as compatibilizer, stiffness was enhanced simultaneously with impact strength. DSC curves of crystallization provided evidence to support the formation of different microstructures.     

Sulfated Hyaluronan Binds to Heparanase and Blocks Its Enzymatic and Cellular Actions in Carcinoma Cells

We examined whether sulfated hyaluronan exerts inhibitory effects on enzymatic and biological actions of heparanase, a sole endo-beta-glucuronidase implicated in cancer malignancy and inflammation. Degradation of heparan sulfate by human and mouse heparanase was inhibited by sulfated hyaluronan. In particular, high-sulfated hyaluronan modified with approximately 2.5 sulfate groups per disaccharide unit effectively inhibited the enzymatic activity at a lower concentration than heparin. Human and mouse heparanase bound to immobilized sulfated hyaluronan. Invasion of heparanase-positive colon-26 cells and 4T1 cells under 3D culture conditions was significantly suppressed in the presence of high-sulfated hyaluronan. Heparanase-induced release of CCL2 from colon-26 cells was suppressed in the presence of sulfated hyaluronan via blocking of cell surface binding and subsequent intracellular NF-κB-dependent signaling. The inhibitory effect of sulfated hyaluronan is likely due to competitive binding to the heparanase molecule, which antagonizes the heparanase-substrate interaction. Fragment molecular orbital calculation revealed a strong binding of sulfated hyaluronan tetrasaccharide to the heparanase molecule based on electrostatic interactions, particularly characterized by interactions of (−1)- and (−2)-positioned sulfated sugar residues with basic amino acid residues composing the heparin-binding domain-1 of heparanase. These results propose a relevance for sulfated hyaluronan in the blocking of heparanase-mediated enzymatic and cellular actions.     

Theranostic Agent Combining Fullerene Nanocrystals and Gold Nanoparticles for Photoacoustic Imaging and Photothermal Therapy

Developing photoactivatable theranostic platforms with integrated functionalities of biocompatibility, targeting, imaging contrast, and therapy is a promising approach for cancer diagnosis and therapy. Here, we report a theranostic agent based on a hybrid nanoparticle comprising fullerene nanocrystals and gold nanoparticles (FGNPs) for photoacoustic imaging and photothermal therapy. Compared to gold nanoparticles and fullerene crystals, FGNPs exhibited stronger photoacoustic signals and photothermal heating characteristics by irradiating light with an optimal wavelength. Our studies demonstrated that FGNPs could kill cancer cells due to their photothermal heating characteristics in vitro. Moreover, FGNPs that are accumulated in tumor tissue via the enhanced permeation and retention effect can visualize tumor tissue due to their photoacoustic signal in tumor xenograft model mice. The theranostic agent with FGNPs shows promise for cancer therapy.     

Accessing Context in Wearable Computers

We present an easy interaction technique for accessing location-based contextual data shown on a head-worn wearable computer display. Our technique, called Context Compass, is based on a regular compass metaphor. Each object belonging to the user’s current context is visualised on a linear compass shown on the screen. The object directly in front of the user is shown in the middle of the compass and can be activated. Whenever the user turns his or her head, the objects on the screen move accordingly. Therefore, an object can be selected by simply turning one’s head towards it. Context Compass consumes a minimal amount of screen space, making it ideal for usage with see-through head-worn displays. An initial pilot study, applying a newly developed usability method customised especially for Context Compass, revealed that Context Compass can be learned virtually immediately. Further, the method itself proved to be successful in evaluating techniques such as Context Compass.     

Polymeric organogel as an effective approach for eradication of heavy metal ions As,Pb, Cd,and Cr from the surface of groundwater through adsorption stratagem

Excess metal pollutant has affected and caused serious havoc in the lives of terrestrial as well as aquatic beings. The core of this work revolves around eradicating highly toxic heavy metal ions from underground water systems using a cost-effective, high removal efficiency polymeric adsorbent capable of adsorbing and removing ionic metals whose backbone is composed of a bio-degradable polymer, polyvinyl alcohol. The obtained adsorbent was characterized using FT-IR, HNMR, and P-XRD. Morphological studies were carried out using SEM. Detection and adsorption of metal ions were performed using SEM–EDX and AAS; wherein the adsorbent was found to remove nearly 80% of arsenic ions, 70.5% and 70.7% for lead and chromium ions while 60.7% for cadmium ions, respectively. Further, the kinetics of adsorption along with intraparticle diffusion studies were also performed to determine the mechanism alongside observing the isothermal influence of the sorbent. The adsorption capacity was seen to be highest in arsenic at around 570.42 mg g⁻¹ thus acting as a potential and effective adsorbent for the removal of heavy metal ions from groundwater.     

Application of a multiline material characterization method to inkjet printed electronics

Material characterization has become increasingly important with the adoption of simulation‐based workflow for microwave electronics design. This article focuses on the characterization of printable electronics materials using transmission‐line measurements and demonstrates the capability of the multiline characterization method to separate dielectric and conductor losses when line geometry and material properties vary between the lines. The effects of multiline algorithm, number of line standards, and methods for selecting optimal line lengths are demonstrated. Consistent characterization results are obtained from inkjet‐printed transmission lines on two different substrate materials. In addition, local conductor thickness variations are demonstrated as an effective way to decrease losses. Finally, the simulation‐based procedure for determining the material properties is outlined and applied to printable electronics characterization. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:177–183, 2014.     

Effect of meso Positioned Substituents on the Stability and Photodynamic Activity of Lipid-Membrane-Incorporated Porphyrin Derivatives

In this study we prepared aqueous solutions of lipid-membrane incorporated tetraarylporphyrins and tetrapyridylporphyrin (LMIPors) by the injection method using dimethyl sulfoxide. The porphyrins with proton-donor groups at the meso position afforded stable aqueous solutions of LMIPors. However, although tetrakis(carboxyphenyl)porphyrin was scarcely incorporated in lipid membranes, it was soluble in water. Among these LMIPors, the photodynamic activity of tetrakis(hydroxyphenyl)porphyrin was higher than that of tetrakis(aminophenyl)porphyrin. This was attributed to the self-aggregation of a part of tetrakis(aminophenyl)porphyrin in the liposomes, which induced self-quenching and the consequent decrease of its photodynamic activity.     

Films from oat spelt arabinoxylan plasticized with glycerol and sorbitol

The development of packaging films based on renewable materials is an important and active area of research today. This is the first extensive study focusing on film‐forming properties of an agrobiomass byproduct, namely, oat spelt arabinoxylan. A plasticizer was needed for cohesive film formation, and glycerol and sorbitol were compared. The tensile properties of the films varied with the type and amount of the polyol. With a 10% (w/w) plasticizer content, the films containing glycerol had higher tensile strength than the films containing sorbitol, but with a 40% plasticizer content, the result was the opposite. Sorbitol‐plasticized films retained their tensile properties better than films with glycerol during 5 months of storage. The films were semicrystalline with similar crystallinity indices of 0.20–0.26. The largest crystallites (9.5 nm) were observed in the film with 40% glycerol. The softening of films with 40% (w/w) glycerol started at a significantly lower relative humidity (RH) than that of the corresponding sorbitol‐containing films. The films with sorbitol also had lower water vapor permeability (WVP) than the films with glycerol. The films plasticized with 10% (w/w) sorbitol had a WVP value of 1.1 g mm/(m²·d·kPa) at the RH gradient of 0/54%. The oxygen permeability of films containing 10% (w/w) glycerol or sorbitol was similar: 3 cm³·μm/(m²·d·kPa) at 50–75% RH. A higher plasticizer content resulted in more permeable films. Permeation of sunflower oil through the films was not detected. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Tough and Self‐Recoverable Thin Hydrogel Membranes for Biological Applications

Tough and self‐recoverable hydrogel membranes with micrometer‐scale thickness are promising for biomedical applications, which, however, rarely be realized due to the intrinsic brittleness of hydrogels. In this work, for the first time, by combing noncovalent DN strategy and spin‐coating method, we successfully fabricated thin (thickness: 5–100 µm), yet tough (work of extension at fracture: 10⁵–10⁷ J m^?3) and 100% self‐recoverable hydrogel membranes with high water content (62–97 wt%) in large size (≈100 cm²). Amphiphilic triblock copolymers, which form physical gels by self‐assembly, were used for the first network. Linear polymers that physically associate with the hydrophilic midblocks of the first network, were chosen for the second network. The inter‐network associations serve as reversible sacrificial bonds that impart toughness and self‐recovery properties on the hydrogel membranes. The excellent mechanical properties of these obtained tough and thin gel membranes are comparable, or even superior to many biological membranes. The in vitro and in vivo tests show that these hydrogel membranes are biocompatible, and postoperative nonadhesive to neighboring organs. The excellent mechanical and biocompatible properties make these thin hydrogel membranes potentially suitable for use as biological or postoperative antiadhesive membranes.