Synthesis of Sialon from Kaolin and Its Phase Formation

The main phase transformations during synthesis of β‐sialon from kaolin of the Prosyanovskii deposit (Ukraine) under test-industrial production conditions have been studied. Sialon was prepared by carbothermal reduction in graphite-tube furnaces in nitrogen. It is shown that the process is characterized by the simultaneous occurrence of several chemical reactions with formation of intermediate phases (Si₂ON₂, X₁‐phase), silicon carbide, and (apart from β‐sialon) sialons based on AlN polytypes. The phase composition of the final product is determined not only by the charge composition but also by the set of production parameters. Results of the work may provide a basis for commercial preparation of sialon powder.     

Use of tension springs in the drive of the displacement system of a cryogenic cooler

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 5, p. 17, May, 1989.     

The effect of probability of coalescence on the evolution of bubble sizes in a turbulent pipeline flow: A numerical study

A population balance method in which continuum and discrete phases are integrated is developed to simulate the evolution of polydisperse population of bubbles in a turbulent pipeline flow. The investigation is focused on the effect of the coalescence efficiency on this evolution. A dilute system of bubbles under microgravity conditions is considered. It is found that if the initial coalescence efficiency is low, a slight increase produces a significant effect on the bubble coalescence rate, and thus on the evolution of the population. If, however, the initial coalescence efficiency is high, its increase results in a marginal effect on the way the population evolves. The results of simulations are validated against experimental data on the population mean.     

Inheritance of male hybrid sterility in the house musk shrew (Suncus murinus, Insectivora, Soricidae)

Two geographic races of the house musk shrew (Suncus murinus) were crossed and intercrossed in the laboratory. Many cases of male sterility were detected among the hybrids. Segregation analysis of the pedigree data showed that the inheritance of male sterility in interracial hybrids of S. murinus can be described within the framework of monogene polyallele model with sterility of a single allele combination. This model is similar if not identical to that proposed by Dobzhansky and Muller.     

Induction of DNA-double-strand breaks by auger electrons from 99mTc complexes with DNA-binding ligands

The potential of certain Auger electron emitting nuclides for systemic radiotherapeutic applications has recently gained much attention. In particular, the ability of several nuclides, including 111In, 125I, and 123I, to induce DNA double-strand breaks (dsb), a good indicator of cytotoxicity, has been extensively studied. However, this ability has never previously been shown experimentally for 99mTc, which, besides the well-known gamma radiation that is used for diagnostic applications, also emits an average of 1.1 conversion electrons and 4 Auger or Coster-Kronig electrons per decay. Owing to the short range of Auger electrons, the radionuclide needs to be located very close to the DNA for dsb to occur. We synthesized two cationic 99mTcI-tricarbonyl complexes with pendant DNA binders, pyrene and anthraquinone. The X-ray crystal structures of the two complexes could be elucidated. Linear dichroism and UV/Vis spectroscopy revealed that the complex with pyrene intercalates DNA with a stability constant, K, of 1.1 x 10(6) M(-1), while the analogous complex with anthraquinone interacts with DNA in a groove-binding mode and has an affinity value of K=8.9 x 10(4) M(-1). We showed with phiX174 double-stranded DNA that the corresponding 99mTc complexes induce a significant amount of dsb, whereas non-DNA-binding [TcO4]- and nonradioactive Re compounds did not. These results indicate that the Auger electron emitter 99mTc can induce dsb in DNA when decaying in its direct vicinity and this implies potential for systemic radiotherapy with 99mTc complexes.     

Synthesis of amphiphilic (meth)acrylates with oligo(ethylene glycol) and (or) oligo(propylene glycol) blocks by the esterification of (meth)acrylic acid

Thermoresponsive PEG-based (PEG stands polyethylene glycol) polymers are unique for use in medicine because of their low toxicity, good biocompatibility and biodegradability, but usually more hydrophobic and more toxic comonomers are used to adjust lower critical solution temperature (LCST). A convenient way to overcome this problem and to finely tune LCST is to use alkoxy oligo(ethylene glycol)- or alkoxy oligo(propylene glycol) (meth)acrylates as starting comonomers. Here we report on the conditions for the simple and affordable synthesis of methoxy oligo(propylene glycol) (meth)acrylate- and methoxy oligo(propylene glycol)-block-oligo(ethylene glycol) (meth)acrylate-based macromonomers with high yields (80%–98.7%) by the acid-catalyzed esterification of (meth)acrylic acid with alkoxy oligo(alkylene glycols) containing oligo(ethylene glycol) (OEG) and/or oligo(propylene glycol) (OPG) blocks. p-Toluene sulphonic acid (pTSA), alkyl(C₁₂–C₁₄)benzene sulfonic acid (ABSA) and H₂SO₄ were used as catalysts. It has been shown that pTSA and ABSA are practically the same in catalytic activity and are superior to sulfuric acid. The reaction orders with respect to catalyst was found to be close to 1 in all cases. It has been shown that the reaction is actually insensitive to the lengths of OEG and OPG blocks, as well as to the structure of the terminal alkyl group, while the esterification of acrylic acid (AA) proceeds much faster compared to methacrylic acid (MAA) one under the same conditions. The influence of temperature on the equilibrium conversions of alcohols was determined, which were found to be 89%–93% for the esterification of AA and 61%–86% for MAA in the temperature range of 60–120°C. A further increase in conversion was achieved by introducing an azeotropic agent (toluene), its optimal concentration was found to be 10%–15%.     

The influence of poly(3,4-ethylenedioxythiophene) modification on the transport properties and fuel cell performance of Nafion-117 membranes

Nafion-117/PEDOT composite membranes were synthesized by in situ chemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using ammonium persulfate as an oxidant. The polymerization of EDOT in Nafion membranes for various EDOT/oxidant treatment sequences was studied for the first time. PEDOT introduction leads to a slight decrease in both the ion-exchange capacity and water uptake of the composite membranes, as well as to an increase in cationic transport. Membranes initially treated with an oxidant exhibit better conductivity and lower hydrogen permeability. The effect of both modification of Nafion-117 membranes by PEDOT and hot-pressing of hydrogen-oxygen membrane-electrode assemblies (MEAs) on the performance of proton-exchange membrane fuel cells was studied. The maximum power density of the fabricated MEAs increases 1.5-fold: from 510 (for a pristine Nafion-117 membrane) to 810 mW cm⁻² (for a membrane modified by PEDOT). The current density at a voltage of 0.4 V reaches 1248 and 2246 mA cm⁻², respectively.     

Ultrasonic force microscopy: detection and imaging of ultra-thin molecular domains

The analysis of the formation of ultra-thin organic films is a very important issue. In fact, it is known that the properties of organic light emitting diodes and field effect transistors are strongly affected by the early growth stages. For instance, in the case of sexithiophene, the presence of domains made of molecules with the backbone parallel to the substrate surface has been indirectly evidenced by photoluminescence spectroscopy and confocal microscopy. On the contrary, conventional scanning force microscopy both in contact and intermittent contact modes have failed to detect such domains. In this paper, we show that Ultrasonic Force Microscopy (UFM), sensitive to nanomechanical properties, allows one to directly identify the structure of sub-monolayer thick films. Sexithiophene flat domains have been imaged for the first time with nanometer scale spatial resolution. A comparison with lateral force and intermittent contact modes has been carried out in order to explain the origins of the UFM contrast and its advantages. In particular, it indicates that UFM is highly suitable for investigations where high sensitivity to material properties, low specimen damage and high spatial resolution are required.     

On the power of randomization in on-line algorithms

Against in adaptive adversary, we show that the power of randomization in on-line algorithms is severely limited! We prove the existence of an efficient simulation of randomized on-line algorithms by deterministic ones, which is best possible in general. The proof of the upper bound is existential. We deal with the issue of computing the efficient deterministic algorithm, and show that this is possible in very general cases.A previous version of this paper appeared in the22nd ACM STOC Conference Proceedings. Part of this research was performed while A. Borodin and A. Wigderson were visitors at the International Computer Science Institute, and while G. Tardos was a visitor at the Hebrew University.