Removal of nitrates from groundwater through the use of artificial wetlands

Intensive fertilizer use has led to nitrate contamination of groundwater in many areas. This article examines the possibility of removing nitrates through the construction of artificial wetlands. A pilot study conducted in Denmark has found that the method is effective and economical, at least for small waterworks, though further treatment is necessary before an acceptable microbiological water quality is attained.     

Fungicidal effect of 15 disinfectants against 25 fungal contaminants commonly found in bread and cheese manufacturing.

Resistance of 19 mold and 6 yeast species to 15 commercial disinfectants was investigated by using a suspension method in which the fungicidal effect and germination time were determined at 20 degrees C. Disinfectants containing 0.5% dodecyldiethylentriaminacetic acid, 10 g of chloramine-T per 1, 2.0% formaldehyde, 0.1% potassium hydroxide, 3.0% hydrogen peroxide, or 0.3% peracetic acid were ineffective as fungicides. The fungicidal effect of quaternary ammonium compounds and chlorine compounds showed great variability between species and among the six isolates of Penicillium roqueforti var. roqueforti tested. The isolates of P roqueforti var. carneum, P. discolor, Aspergillus versicolor, and Eurotium repens examined were resistant to different quaternary ammonium compounds. Conidia and vegetative cells were killed by alcohols, whereas ascospores were resistant. Resistance of ascospores to 70% ethanol increased with age. Both P. roqueforti var. roqueforti and E. repens showed great variability of resistance within isolates of each species.     

Room electromagnetics

In analogy with the established discipline of room acoustics, various aspects of diffuse wideband microwave propagation in a room are treated. It is shown that an equivalent to Sabine's equation for reverberation time in a room is valid for the completely diffused field, depending only on the volume, the surface area, and an effective absorption coefficient. An exponential decay of the power as a function of the delay is a consequence of the assumptions. Furthermore, the concept of a reverberation distance is also valid. This is the distance from a transmitting antenna where the received diffuse, randomly scattered power equals the direct line-of-sight received power, such that the diffuse power dominates for distances larger than the reverberation distance. A number of measurements in a large room support the theory with an effective absorption coefficient of 0.5. The power delay profiles around the room from a transmitter in the ceiling vary only in the first arriving part of the impulse, whereas the tail, being dominated by the diffuse field, has the same power level for a given delay and the same decay rate all over the room. It is also a consequence of the theory that the diffuse fields incident on an antenna are uniformly distributed in angle.     

The effect of cyclic stress on the physical properties of a poly(dimethylsiloxane) elastomer

The dynamic creep behavior of a filled poly(dimethylsiloxane) elastomer was studied under cyclic stress. The stress level was chosen such that the increase in the internal temperature was small and that microcracks were not observed. This work has demonstrated that cyclic stress in combination with high temperature accelerates the degradation of the elastomer. The results suggest that because of the applied force, breaks in the load-bearing chains of the network occur. These breaks, while relieving the mechanical stress, create highly reactive ionic fragments. It is believed that because of the subsequent reactions of the ionic fragments, changes in the specific gravity, storage modulus, effective crosslink density, and length of the sample (creep) are observed. The observed decrease in the storage modulus is thought to occur because of the reaction of the ionic fragments with moisture, which results in the formation of silanol chain ends that reduce the effective crosslink density. The results also show that contrary to the prediction of the Boltzmann's Superposition Principle, the rate of creep is greatly enhanced when the sample is subjected to a sinusoidally varying dynamic load as compared to a comparable static load. The polymer weight loss was found to be linear with time and strongly dependent on the level of applied dynamic and static force. In addition, the weight loss and rate of creep were also found to be strongly dependent upon temperature.     

Comparative antagonism of kainate-activated kainate and AMPA receptors in hippocampal neurons

Native kainate receptors expressed by cultured hippocampal cells were studied in the whole-cell configuration of the patch-clamp technique by using a fast perfusion system. About 80% of the neurons expressed kainate receptors independently of the time in culture (0-4 days), which coincided with the number of cells immunoreactive for a monoclonal antibody against the GluR5/6/7 subunits. Three types of cells were considered: neurons in which the rapid application of kainate induced a rapidly desensitizing current, cells in which kainate induced a more slowly rising, non-desensitizing, response and those in which a mixture of both responses was apparent. Steady responses induced by 300 microM kainate were inhibited by 6-cyano-7-nitroquinoxaline-2,3-dione (CNQX) in a dose-dependent manner (IC50 = 0.92 microM). CNQX was less potent in blocking transient kainate-induced responses (IC50 = 6.1 microM). Responses to kainate, whether steady or transient, were also inhibited by NS102, showing poor selectivity for the transient response (IC50 = 4.1 and 2.2 microM respectively). The new alpha-amino-3-hydroxy-5-methyl-4-isoxazole (AMPA) receptor antagonist NS394 was very potent in inhibiting steady kainate-induced currents (IC50 = 0.45 microM), but was even more effective in preventing peak responses (IC50 = 0.13 microM). In contrast, cyclothiazide did not affect transient kainate-induced responses but did potentiate current induced by activation of AMPA receptors by AMPA or kainate. These results demonstrate the lack of complete selectivity amongst some available competitive antagonists for AMPA and kainate receptors, and indicate that kainate receptors expressed by hippocampal cells lack the cyclothiazide modulatory site present at AMPA receptors. In addition, the present data support the idea that low-affinity kainate binding sites in the brain correspond to receptor channels selectively activated by kainate.     

Simulation of sulfide buildup in wastewater and atmosphere of sewer networks.

A model concept for prediction of sulfide buildup in sewer networks is presented. The model concept is an extension to--and a further development of--the WATS model (Wastewater Aerobic-anaerobic Transformations in Sewers), which has been developed by Hvitved-Jacobsen and co-workers at Aalborg University. In addition to the sulfur cycle, the WATS model simulates changes in dissolved oxygen and carbon fractions of different biodegradability. The sulfur cycle was introduced via six processes: 1. sulfide production taking place in the biofilm covering the permanently wetted sewer walls; 2. biological sulfide oxidation in the permanently wetted biofilm; 3. chemical and biological sulfide oxidation in the water phase; 4. sulfide precipitation with metals present in the wastewater; 5. emission of hydrogen sulfide to the sewer atmosphere and 6. adsorption and oxidation of hydrogen sulfide on the moist sewer walls where concrete corrosion may take place.     

Enzymatic biodiesel production: Technical and economical considerations

It is well documented in the literature that enzymatic processing of oils and fats for biodiesel is technically feasible. However, with very few exceptions, enzyme technology is not currently used in commercial‐scale biodiesel production. This is mainly due to non‐optimized process design and a lack of available cost‐effective enzymes. The technology to re‐use enzymes has typically proven insufficient for the processes to be competitive. However, literature data documenting the productivity of enzymatic biodiesel together with the development of new immobilization technology indicates that enzyme catalysts can become cost effective compared to chemical processing. This work reviews the enzymatic processing of oils and fats into biodiesel with focus on process design and economy.     

Design and Characterization of the CLIMPAQ,Chamber for Laboratory Investigations of Materials,Pollution and Air Quality*

A test chamber has been developed in order to provide a small and simple emission testing facility capable of testing construction products in a climate where the important climatic parameters such as temperature, ventilation rate and air velocity can be varied independently around typical indoor values. The test chamber CLIMPAQ is made of panes of window glass. Other main surface materials are stainless steel and eloxated aluminium. The chamber has a volume of 50.9 litres and is designed to meet the requirements for quantifying air pollution. In this investigation human subjects acted as air pollution judges, and chemical characterization of the air pollution was carried out. Carpet, linoleum, wall paint and seal- ant were tested simultaneously in the CLIMPAQ and in four other chambers ranging from a full-scale chamber of 28 m³ to a field and laboratory emission cell of 3.5· 10^?5m³. Product ranking is the same in all chambers for the sensory measurements. Emission rates based on sensory measurements differ for all products less than 100 % except for tests in a 3-litre chamber where emission rates were higher. Chemical measurements differ up to approximately 10 times for the same product in different chambers. Deviations appear to be the result of different environmental parameters in the various chambers. Low air concentrations or high specific ventilation rates seem to increase emissions, while differences in air velocities and sink properties may also be the cause of differences in emission rates.     

Enalapril versus bendroflumethiazide in type 2 diabetes complicated by hypertension

In a double-blind, double-dummy, randomized, multi-centre study, the effects of bendroflumethiazide vs. enalapril on blood pressure, glycaemic control, lipoprotein concentrations and albuminuria were compared in non-proteinuric, hypertensive type 2 diabetic patients; they were treated for 20 weeks with either bendroflumethiazide 2.5-5.0 mg (n = 59) or enalapril 10-20 mg (n = 55). Age, fasting plasma glucose, HbA1c and BMI were similar in the groups. Systolic and diastolic blood pressure were reduced in both groups. Bendroflumethiazide was accompanied by minor but significant elevations in fasting plasma glucose and serum C-peptide. HbA1c was increased during both treatments. Lipoproteins and urinary albumin/creatinine ratio were stable. Bendroflumethiazide caused a decrease in serum potassium and an increase in serum urate. No significant correlations were observed between the decline in blood pressure and changes in the metabolic risk factors. Baseline levels of age, sex, BMI, blood pressure or urinary albumin/creatinine ratio were not related to changes in blood pressure, metabolic parameters or urinary albumin/creatinine ratio.