Wideband and compact folded loop antenna

A simple and successful design method that yields a wideband and compact antenna without a ground plane is proposed. The antenna, referred to as the folded loop antenna, can, with the right parameters, achieve wideband characteristics. Calculated and measured results agree well and more than 50% bandwidth (return loss /spl les/-10 dB) is obtained.     

The As-prepared surfaces of C-axis-oriented Nd1Ba2Cu3Oy thin films characterized using scanning probe microscopes

Recently, superconducting Nd₁Ba₂Cu₃O_y (Ndl23) thin films with high superconducting transition temperature (T _c) have been successfully fabricated at our institute employing the standard laser ablation method. In this paper, we report the results of surface characterization of the Nd123 thin films using an ultrahigh vacuum scanning tunneling microscope/spectroscopy (UHV-STM/STS) and an atomic force microscope (AFM) system operated in air. Clear spiral pattern is observed on the surfaces of Nd123 thin films by STM and AFM, suggesting that films are formed by two-dimensional island growth mode. Contour plots of the spirals show that the step heights of the spirals are not always the integer or half-integer number of thec-axis parameter of the structure. This implies that the surface natural termination layer of the films may not be unique. This result is supported byI-V STS measurements. The surface morphology of the Nd123 thin films is compared with that of thec-axis-oriented Y₁Ba₂Cu₃S_y thin films. Surface atomic images of the as-prepared Nd123 thin films are obtained employing both STM and AFM. STS measurements show that most of the surfaces are semiconductive. The results of STS measurements together with the fact that we are able to see the surface atomic images using scanning probe microscopes suggest that exposure to air does not cause serious degradation to the as-prepared surfaces of Nd123 thin films.     

Heat Capacity of 3He Solid Film on Graphite in Magnetic Fields

Heat capacities of a submonolayer ³He solid film adsorbed on a graphite surface are measured in magnetic fields up to 400 Oe. The measured heat capacity shifts to higher temperatures with an increasing magnetic field. The amplitudes of the shifts are twenty times larger than the magnitude of the Zeeman energy, which is anomalously large. With regard to the origin of these large shifts, the reduction of frustrations and the weakening of the competition between multiple spin exchange interactions are discussed.     

Fabrication of GaAs quantum wire structure using metal organic molecular beam epitaxy

GaAs quantum wires (100*20 nm/sup 2/) buried in AlAs layers have been successfully fabricated using metal organic molecular beam epitaxy (MOMBE) for the first time. The underlying growth mechanism is that, under appropriate As/sub 4/ pressure in MOMBE, GaAs preferentially grows only on the sidewalls of the patterned     

Growth condition of iodine-doped n+-CdTe layers in metal-organic vapor phase epitaxy

Iodine doping of CdTe layers grown on (100) GaAs by metal-organic vapor phase epitaxy (MOVPE) was studied using diethyltelluride (DETe) and diisopropyltelluride (DiPTe) as tellurium precursors and ethyliodine (EI) as a dopant. Electron densities of doped layers increased gradually with decreasing the growth temperature from 425°C to 325°C. Doped layers grown with DETe had higher electron densities than those grown with DiPTe. When the hot-wall temperature was increased from 200°C to 250°C at the growth temperature of 325°C, doped layers grown with DETe showed an increase of the electron density from 3.7×10¹⁶ cm⁻³ to 2.6×10¹⁸ cm⁻³. On the other hand, such an increase of the electron density was not observed for layers grown with DiPTe. The mechanisms for different doping properties for DETe and DiPTe were studied on the basis of the growth characteristics for these precursors. Higher thermal stability of DETe than that of DiPTe was considered to cause the difference of doping properties. With increasing the hot-wall temperature from 200°C to 250°C, the effective ratio of Cd to Te species on the growth surface became larger for layers grown with DETe than those grown with DiPTe. This was considered to decrease the compensation of doped iodine and to increase the electron density of layers grown with DETe. The effective ratio of Cd to Te species on the growth surface also increased with decreasing growth temperature. This was considered to increase the electron density with decreasing growth temperature.     

Wavelength-selective fused fiber couplers utilizing fielddifference between core and cladding modes

It is shown that wavelength-selective fused taper couplers can be made by using the large difference in field distribution, between core and cladding modes. It is evident from the calculation results that fibers with a high-index difference and a thin outside diameter are necessary to fabricate the couplers. Fused taper couplers are made of thin fibers with a cladding diameter of 66.0 μm and an index difference of 0.84%. The splitting ratio of the coupler obtained is more than 20 dB in the 1.53-μm region and less than -20 dB in the 0.8 to 1.0-μm region. The loss is less than 0.2 dB and 0.4 dB in the 1.53-μm and the 0.8 to 1.0-μm regions, respectively     

Chemical modification of group IV graphene analogs

Mono-elemental two-dimensional (2D) crystals (graphene, silicene, germanene, stanene, and so on), termed 2D-Xenes, have been brought to the forefront of scientific research. The stability and electronic properties of 2D-Xenes are main challenges in developing practical devices. Therefore, in this review, we focus on 2D free-standing group-IV graphene analogs (graphene quantum dots, silicane, and germanane) and the functionalization of these sheets with organic moieties, which could be handled under ambient conditions. We highlight the present results and future opportunities, functions and applications, and novel device concepts.     

Image-analysis-based assessment of the effects of the "Ca2+-jump" technique on sarcomere uniformity

A new image analysis-based technique was used to quantitatively examine the effects of the "Ca2+-jump" activation protocol on the maintenance of fiber quality in skinned rabbit psoas muscle fiber segments. Specifically, contractions in pCa 4.6 were preceded by short-duration "preactivation" soaks in a solution in which EGTA was replaced with the low-Ca2+ buffering capacity analog hexamethylenediamine-N, N, N', N'-tetraacetate, which facilitated rapid Ca2+ equilibration within the fiber segments. Fiber quality was assessed by examining the Fourier spectra of the muscle fiber images before, during, and after activation. Segment lengths were typically below 500 micrometer, thus allowing the majority of the sarcomeres to be visualized in the field of view (x200 and x400 magnification). The preactivation protocol resulted in less deterioration of fiber quality with repetitive activation. In addition, there was also a significant reduction in the time required to reach the 50% level of maximum tension, with no significant change in the maximum tension level.     

The effect of cold cardioplegic cardiac arrest and electrically induced ventricular fibrillation on human cardiac beta-adrenoceptors during open-heart surgery

This study was designed to test the hypothesis that distinct alterations in cardiac beta-adrenoceptors (betaARs) may occur during cardiopulmonary bypass (CPB) alone, during CPB with cold cardioplegic cardiac arrest (CCCA), and during CPB with electrically induced ventricular fibrillation (EIVF). We assessed the density and affinity of right atrial betaARs in 27 patients undergoing open-heart surgery by (-)-[125I]iodocyanopindolol binding before CPB, defined as the "control," immediately after initiation, defined as "before," and immediately before the cessation of CCCA or EIVF, defined as "after." The density of betaARs was equivalent between the "control" and "before" groups; however, during CPB with EIVF, the density of betaARs decreased significantly (P < 0.001), whereas during CPB with CCCA, it increased significantly (P < 0.01). The rate of changes of the betaAR density was not correlated with the "before"-"after" interval, and the affinity of the betaARs did not change throughout these CPBs. These findings demonstrate that: CPB alone does not affect cardiac betaARs, at least until the onset of EIVF or CCCA; CPB with EIVF induces rapid desensitization of cardiac betaARs; and CPB with CCCA induces rapid sensitization of cardiac betaARs.     

Evaluation of immunochromatographic test kits for food allergens using processed food models

It has been mandatory to label five allergenic substances (AS; egg, milk, wheat, buckwheat and peanut) in all processed foods, since April 2002 in Japan. Two kinds of ELISA kits have been provided as screening test kits for the Japanese official method. The kits have many advantages but some disadvantages, i.e., the kits are not necessarily suitable for daily monitoring in food manufacturing plants, because they require various analytical equipments and the use of complicated procedures. To overcome these drawbacks, we have developed other diagnostic kits based on immunochromatography that should enable more rapid and simple screening for food allergens. Then we examined the performance of these immunochromatographic test kits (IC kits) in terms of sensitivity, repeatability and cross-reactivity to AS proteins in 11 kinds of food models with various heating conditions and physical properties. We also examined processed food models including AS protein of constant concentration, using the IC kits and ELISA kits, and compared the results. The IC kits detected AS proteins at 5 microg/g in the extracts from processed food models, and provided highly reproducible results. Cross-reactivity among the AS proteins was not observed. The results obtained using the IC kits showed performance equivalent to that of the ELISA kits we examined in unheating processed food models including AS proteins of constant concentration. The IC kits should be more suitable for daily monitoring in food manufacturing plants.