Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.     

Physiological functions and regulation of K+ and Cl- channels in single smooth muscle cells

Solution- and solid-state c.d. spectra, as well as surface energetics values, were collected for a series of peptides derived from human salivary proline-rich glycoprotein (PRG). The acronyms and sequences for these peptides are as follows: PRG9-2 = NH2-G(1)-P(2)-CONH2, PRG9-3 = NH2-G(1)-P(2)-P(3)-CONH2, PRG9-4 = NH2-G(1)-P(2)-P(3)-P(4)-CONH2, PRG9-5 = NH2-G(1)-P(2)-P(3)-P(4)-H(5)-CONH2, PRG9-6 = NH2-G(1)-P(2)-P(3)-P(4)-H(5)-P(6)-CONH2, PRG9-7 = NH2-G(1)-P(2)-P(3)-P(4)-H(5)-P(6)-G(7)-CONH2, PRG9-8 = NH2-G(1)-P(2)-P(3)-P(4)-H(5)-P(6)-G(7)-K(8)-CONH2, and PRG9-9 = NH2-G(1)-P(2)-P(3)-P(4)-H(5)-P(6)-G(7)-K(8)-P(9)-CONH2. The presence of stable poly-L-proline II-like 'mini' helices in the solution state was found to be dependent on peptide chain length, pH, salt, and organic solvent type. Other conformational features such as kinks and beta-/gamma-turns were also found in the larger peptides. Solid-state peptide conformations were not necessarily related to their solution-state counterparts. Poly-L-proline II-like 'mini' helices, kinks, and beta-/gamma-turns were similarly found in the various substrate-bound PRG9 peptides. Surface energetics parameters suggested specific orientations for PRG9 peptides and their constituent acids and homopolymers.     

Frequency response function of magnetic bearings using high-temperature superconductor

A high-temperature superconductor YBa₂Cu₃O_7-x with strong pinning force has allowed stable magnetic suspension with no control to be developed. Two types of superconducting magnetic bearings (SMB) using YBCO and permanent magnet were assembled. The two types are radial and axial. The dynamic stiffness of each SMB as it was cooled down under a magnetic field by liquid nitrogen was measured both radially and axially. As a result, it was found that the spring constants of these SMBs were almost as large as a practically desirable value; however, their damping coefficients were lower than the practical level. These findings are useful as one of the data bases for development of an optimum SMB design to support the weight of rotors in an axial direction.     

Thermal expansion behavior of various aromatic polyimides

The thermal expansion behavior for various aromatic polymides was investigated. Usally polymers, including polyimides, have high thermal expansion coefficients (3–6 × 10^?5 K^?1), compared with metals and ceramics. However, there are some polyimides which have very low thermal expansion coefficients below 1 × 10^?5 K^?1. This property was observed for the polymides obtained from pyromellitic dianhydride or 3,3′ 4,4′-biphenyltetracarboxylic dianhydride and aromatic diamines which were constituted of only benzene rings fused at para positions. It was proposed that their low thermal expansion coefficient related to the linearity in their polymer molecular skeltons.     

Effect of sex hormones on rat liver cytosolic alcohol dehydrogenase activity

A large public service organization was concerned with protection of its customers against hazards associated with furniture tipping in public use concourses. Because no injury experience was available for analysis, hazard patterns for tipping accidents were developed from an observational study of public interaction with the furniture. For each hazard pattern, anthropometric models were used to find the probability of the furniture being safe from tipping, for different age and gender combinations. A safety criterion was developed from this modeling, and used to change the weights of some furniture items to resist tipping. These modifications have now been implemented and are in widespread use. Implications for broader application of these models to the development of valid tipping standards for furniture are discussed.     

Acrylic nonaqueous dispersion using butylated melamine-formaldehyde resin as dispersant

A series of acrylic nonaqueous dispersions were prepared by using various kinds of butylated melamine–formaldehyde (BMF) resins as dispersant. The functional group composition of BMF to form stable dispersion was butoxy group more than 13 mol/BMF 1 mol, and methylol group ranged from 1 to 2.5 mol/BMF 1 mol. It is concluded that the anchoring of BMF to acrylic copolymer was due to the formation of covalent bond between methylol group in BMF and hydroxy group in acrylic copolymer.     

Stereochemistry and mechanism of the hydrogenation of dialkyl cyclohexenes

In order to investigate the steric effect of the substituents to determine the product distribution, disubstituted cyclohexenes were hydrogenated over several transition metal catalysts. Some cyclohexenes which have two large substituents at the vicinal carbon atoms, at least one of which is trigonal, were not hydrogenated over Raney Ni at all but were hydrogenated over Pt catalyst under our experimental conditions. Presumably, the stereoselectivity depends on the competitive operation of the torsional angle strain and the catalyst hindrance with substituents. In the hydrogenation over Pd catalyst, thermodynamically more stable products were dominant at the standard condition but at high substrate to catalyst ratio the less stable products were slightly preferred. No appreciable stereoselectivity was observed in the hydrogenation of 1,4-disubstituted cyclohexenes.     

Observation of three-dimensional elemental distributions of a Si device using a 360 degrees -tilt FIB and the cold field-emission STEM system

A technique for preparation of a pillar-shaped specimen and its multidirectional observation using a combination of a scanning transmission electron microscope (STEM) and a focused ion beam (FIB) instrument has been developed. The system employs an FIB/STEM compatible holder with a specially designed tilt mechanism, which allows the specimen to be tilted through 360 degrees [T. Yaguchi, M. Konno, T. Kamino, T. Hashimoto, T. Ohnishi, K. Umemura, K. Asayama, Microsc. Microanal. 9 (Suppl. 2) (2003) 118; T. Yaguchi, M. Konno, T. Kamino, T. Hashimoto, T. Ohnishi, M. Watanabe, Microsc. Microanal. 10 (Suppl. 2) (2004) 1030]. This technique was applied to obtain the three-dimensional (3D) elemental distributions around a contact plug of a Si device used in a 90-nm technology. A specimen containing only one contact plug was prepared in the shape of a pillar with a diameter of 200nm and a length of 5mum. Elemental maps were obtained from the pillar specimen using a 200-kV cold-field emission gun (FEG) STEM model HD-2300C equipped with the EDAX genesis X-ray energy-dispersive spectrometry (XEDS) system through a spectrum imaging technique. In this study, elemental distributions of minor elements with weak signals were enhanced by applying principal component analysis (PCA), which is a superior technique to extract weak signals from a large dataset. The distributions of elements, especially the metallization component Ti and minor dopant As in this particular device, were successfully extracted by PCA. Finally, the 3D elemental distributions around the contact plug could be visualized by reconstruction from the tilt series of maps.     

Homo- and copolymerizations of 3-(N-carbazolyl)-1-propyne and its homologues by Mo and W catalysts

Summary 3-(N-Carbazolyl)-1-propyne polymerized with MoCl₅- and WCl₆-based catalysts to produce a polymer in high yields. The MoCl₅ and MoCl₅-n-Bu₄Sn catalysts were the most effective (the systems solidified immediately after initiation of polymerization with these catalysts). The product polymer was a yellow solid insoluble in any solvent. Copolymerization of the present monomer with tert-butylacetylene by MoCl₅-n-Bu₄Sn produced a copolymer; it had a high molecular weight (M _w 350,000), completely dissolved in toluene, CHCl₃ etc, and formed a free-standing film by solution casting. -N-Carbazolyl-1-hexyne and-1-octyne produced toluene-insoluble polymers with WCl₆-Ph₄Sn.