Phase locked loop-based clock synthesizer for reconfigurable analog-to-digital converters

Analog Integrated Circuits and Signal Processing - This paper presents the complete design of a phase locked loop-based clock synthesizer for reconfigurable analog-to-digital converters. The...     

Modeling of flashing-induced instabilities in the start-up phase of natural-circulation BWRs using the two-phase flow code FLOCAL

This paper reports on the modeling and simulation of flashing-induced instabilities in natural-circulation systems, with special emphasis on natural-circulation boiling water reactors (BWRs). For the modeling the 4-equation two-phase model FLOCAL [Rohde, U., 1986. Ein teoretisches Modell fur Zweiphasen-stromungen in wassergekulthen Kernreaktoren und seine Anwendung zur Analyse des Naturumlaufs im Heizreaktor AST-500. Ph.D. dissertation, Akademie der Wissenschaften der DDR, Dresden], developed at the Forschungszentrum Rossendorf (FZR, Germany), has been used. The model allows for the liquid and vapor to be in thermal non-equilibrium and, via drift-flux models, to have different velocities.The phenomenology of the instability has been studied and the dominating physical effects have been determined. The results of the simulations have been compared qualitatively and quantitatively with experiments [Manera, A., van der Hagen, T.H.J.J., 2003. Stability of natural-circulation-cooled boiling water reactor during start up: experimental results. Nuc. Technol., 143] that have been carried out within the framework of a European project (NACUSP) on the CIRCUS facility. The facility, built at the Delft University of Technology in The Netherlands, is a water/steam 1:1 height-scaled loop of a typical natural-circulation-cooled BWR.     

Evolution of the Metaponto District,Southern Italy: From Land Reform to New Sustainable Scenarios

In this paper we have represented the economic, environmental and territorial transformation of Metaponto district (southern Italy) generated by the land reform since 1950. The coastal area, once inhospitable and unproductive, through land reform has become a point of development for the entire Basilicata Region. The intensive model of economic development applied to agriculture and tourism today represents the main critical points of high environmental impact. In particular, the great human pressure exerted by economic activities has led to an insufficient capacity of water purification systems in the area and such criticism is amplified in the summer mainly for seaside tourism. In this study we have measured the environmental load exerted on the territory and we have estimated the human pressure on the district in the year 2030 and made proposals for amendments to current patterns of development in the agricultural and tourist sectors.     

Application of titanium machining chips in welding consumables for wear-resistant hardfacing

Equipment of sugar cane plants and mineral extraction are submitted to severe abrasive wear conditions. Welded hardfacings are usually applied to repair this kind of damage, where commercial chromium/carbon-rich welding consumables have usually been employed. In the present work we investigated the microstructure of experimental hardfacings made by addition of residues (chips) collected from the machining of ASTM F67 (unalloyed Ti, grade 4) alloy. Mixtures with different carbide-formers (Cr/Nb ferro-alloys) were also tested. Two layers of ‘pure’ chips (Ti), chips plus Fe–Cr (Ti–Cr), and chips plus Fe–Nb (Ti–Nb) were applied on low-carbon steel specimens by the GTAW/TIG process. The microstructure of hardfacing layers was observed by optical and scanning electron microscopy (SEM) equipped with EDS microanalysis. The microstructural characterization has determined that carbide distributions change significantly with the chemical nature of the hardfacing. SEM observations coupled with EDS microanalysis have confirmed the formation of complex carbides within the metal weld, whose stoichiometry was determined by X-ray diffraction (XRD) analysis. Mixed carbides of MC type and some cementite have been found. As a result it was suggested that use of ASTM F67 chips as carbide formers for composition of welding consumables can contribute to improved wear resistance of hardfacings, if compared with traditional chromium-based hardfacings.     

Potent,Metabolically Stable 2‐Alkyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐adenines as Adenosine A2A Receptor Ligands

Inhibition of adenosine A_2A receptors has been shown to elicit a therapeutic response in preclinical animal models of Parkinson’s disease (PD). We previously identified the triazolo‐9H‐purine, ST1535, as a potent A_2AR antagonist. Studies revealed that ST1535 is extensively hydroxylated at the ω‐1 position of the butyl side chain. Here, we describe the synthesis and evaluation of derivatives in which the ω‐1 position has been substituted (F, Me, OH) in order to block metabolism. The stability of the compounds was evaluated in human liver microsomes (HLM), and the affinity for A_2AR was determined. Two compounds, (2‐(3,3‐dimethylbutyl)‐9‐methyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐purin‐6‐amine ( 3 b ) and 4‐(6‐amino‐9‐methyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐purin‐2‐yl)‐2‐methylbutan‐2‐ol ( 3 c ), exhibited good affinity against A_2AR (K_i=0.4 nM and 2 nM , respectively) and high in vitro metabolic stability (89.5 % and 95.3 % recovery, respectively, after incubation with HLM for two hours).     

Analytical modeling of flashing-induced instabilities in a natural circulation cooled boiling water reactor

A dynamic model for natural circulation boiling water reactors (BWRs) under low-pressure conditions is developed. The motivation for this theoretical research is the concern about the stability of natural circulation BWRs during the low-pressure reactor start-up phase. There is experimental and theoretical evidence for the occurrence of void flashing in the unheated riser under these conditions. This flashing effect is included in the differential (homogeneous equilibrium) equations for two-phase flow. The differential equations were integrated over axial two-phase nodes, to derive a nodal time-domain model. The dynamic behavior of the interface between the one and two-phase regions is approximated with a linearized model. All model equations are presented in a dimensionless form. As an example the stability characteristics of the Dutch Dodewaard reactor at low pressure are determined.     

Oxide nanoparticle arrays for sensors of CO and NO2 gases

Metal oxide sensors with active films from Fe₂O₃ and CoFe₂O₄ hexagonally assembled nanoparticle (NP) arrays were studied. NPs were synthesized by high-temperature solution phase reaction. Sensing NP layers were deposited by Langmuir-Blodgett (LB) technique. LB layers were characterized by XRD, SEM and magnetic measurements. NPs are monodomain and superparamagnetic at RT. Sensor active films are formed from 1 or 7 LB monolayers deposited on the alumina substrates equipped with heating meander and interdigitated contacts. LB layers were heat-treated or UV irradiated to remove the insulating surfactant. Sensing properties were studied in a test chamber containing reducing (CO) or oxidizing (NO₂) gas in concentrations between 5 and 100 ppm in the mixture with dry air. Response current signal (I_gas/I_air) vs. temperature and response vs. gas concentration calibration curves were measured. Best response values were obtained with CoFe₂O₄ devices between 300 and 400 °C, being 3 and 10 for 100 ppm of CO and 5 ppm of NO₂, respectively. The response and recovery times of sensors are between 3 and 30 min. The Fe₂O₃ and CoFe₂O₄ sensors with response of 8 or 10 to 5 ppm of NO₂ might be of practical applications in the detection of explosives.     

Selected polycyclic aromatic hydrocarbons in smoked tuna, swordfish and Atlantic salmon fillets

The presence of polycyclic aromatic hydrocarbons (PAHs) in commercial smoked fillets of tuna, swordfish and Atlantic salmon was studied. In Europe, the smoking technique is widely used in fish processing and these species are the most representative of the taste of consumers for smoked products. Samples were purchased on the Italian market and analysed by HPLC. Mean concentrations (ng g⁻¹) of acenaphthene (4.4, 6.2, 11.2), phenanthrene (11.5, 18.5, 8.9), anthracene (2.4, 5.2, 1.8), fluoranthene (17.0, 9.4, 4.7), benzo( k )fluoranthene (0.3, 0.1, 0.2) and benzo( a )pyrene (1.3, 0.1, 0.4) were found in Atlantic salmon, tuna and swordfish respectively. Benzo( b )fluoranthene (1.2 ng g⁻¹) was detected only in Atlantic salmon whereas dibenz( a,h )anthracene was never detected in this species, but only in tuna (0.5 ng g⁻¹) and swordfish (1.1 ng g⁻¹). Atlantic salmon contained the highest level of benzo( a )pyrene (2.8 ng g⁻¹) which is below the European regulatory level of 5 ng g⁻¹.     

Concentration and purification of galacto‐oligosaccharides using nanofiltration membranes

This study was aimed at using nanofiltration to purify the galactooligosaccharides (GOS) found in a commercial mixture containing lactose, glucose and galactose, whose compositions were similar to that obtained through transgalactosylation reactions catalysed by β‐galactosidase from Kluyveromyces marxianus CCT 7082. NP030 polyethersulphone membrane was selected for the purification processes, once it differed statistically from other membranes due to the higher purification factor and permeate flux under the optimised temperature and pressure conditions of 35 °C and 3 MPa, respectively. Results indicate that NP030 membrane can be employed as a preliminary technique for the GOS purification with approximately 61% (w/w) of recovery.