Fast frequency estimation and tracking using Lagrange interpolation

A computationally efficient and accurate frequency estimation and tracking algorithm is proposed, based on the adaptive frequency estimator (AFE) of Etter and Hush. A Lagrange interpolator (a fractional delay filter) is used to estimate the gradient of the performance surface of the adaptation, which enables highly accurate estimation. The performance of the new algorithm is demonstrated in the context of tracking a chirp signal in noise     

Design of particle-reinforced polyurethane mould materials for soft tooling process using evolutionary multi-objective optimization algorithms

Polyurethane is used for making mould in soft tooling (ST) process for producing wax/plastic components. These wax components are later used as pattern in investment casting process. Due to low thermal conductivity of polyurethane, cooling time in ST process is long. To reduce the cooling time, thermal conductive fillers are incorporated into polyurethane to make composite mould material. However, addition of fillers affects various properties of the ST process, such as stiffness of the mould box, rendering flow-ability of melt mould material, etc. In the present work, multi-objective optimization of various conflicting objectives (namely maximization of equivalent thermal conductivity, minimization of effective modulus of elasticity, and minimization of equivalent viscosity) of composite material are conducted using evolutionary algorithms (EAs) in order to design particle-reinforced polyurethane composites by finding the optimal values of design parameters. The design parameters include volume fraction of filler content, size and shape factor of filler particle, etc. The Pareto-optimal front is targeted by solving the corresponding multi-objective problem using the NSGA-II procedure. Then, suitable multi-criterion decision-making techniques are employed to select one or a small set of the optimal solution(s) of design parameter(s) based on the higher level information of the ST process for industrial applications. Finally, the experimental study with a typical real industrial application demonstrates that the obtained optimal design parameters significantly reduce the cooling time in soft tooling process keeping other processing advantages.     

Fuzzy triangulation signature for detection of change in human emotion from face video image sequence

The present article proposes a geometry-based fuzzy relational technique for capturing gradual change in human emotion over time available from relevant face image sequences. As associated features, we make use of fuzzy membership arising out of five triangle signatures such as - (i) Fuzzy Isosceles Triangle Signature (FIS), (ii) Fuzzy Right Triangle Signature (FRS), (iii) Fuzzy Right Isosceles Triangle Signature (FIRS), (iv) Fuzzy Equilateral Triangle Signature (FES), and (v) Other Fuzzy Triangles Signature (OFS) to achieve the task of appropriate classification of facial transition from neutrality to one among the six expressions viz. anger (AN), disgust (DI), fear (FE), happiness (HA), sadness (SA) and surprise (SU). The effectiveness of the Multilayer Perceptron (MLP) classifier is tested and validated through 10 fold cross-validation method on three benchmark image sequence datasets namely Extended Cohn-Kanade (CK+), M&M Initiative (MMI), and Multimedia Understanding Group (MUG). Experimental outcomes are found to have achieved accuracy to the tune of 98.47%, 93.56%, and 99.25% on CK+, MMI, and MUG respectively vindicating the effectiveness by exhibiting the superiority of our proposed technique in comparison to other state-of-the-art methods in this regard.

     

Nature of the porosity in American coals

The nature of the porosity in a number of 40 × 70 (i.e. − 40 + 70) mesh size American coals, varying in rank from anthracite to lignite, has been studied using the following characterization techniques: gas adsorption, helium and mercury displacement, and mercury porosimetry. Surface areas calculated from carbon dioxide adsorption at 298 K are consistently higher than those calculated from nitrogen at 77 K, indicating the molecular sieve character of the coals. Total pore volumes have been measured in the diameter range 12–29 600 Å and then divided into macropores (300-29 600 Å), transitional pores (12–300 Å), and micropores (4–12 Å). Coals vary widely in their total pore volumes (porosities range between 4.1 and 23.2%). In the lower-rank coals (carbon content less than 75%), porosity is primarily due to the presence of macropores. In coals having a carbon content in the range 76–84%, about 80% of the total open pore volume is due to micro and transitional pores, whereas in the coals of higher carbon content microporosity predominates. Coals having about 35–55% of their total open pore volume in the transitional range are expected to be most suitable for use for adsorption of organic molecules from solution. Thus, they are of interest as possible materials to be used in water purification. In general, these results are considered to be of importance in understanding the extent and rate of interaction of coals with gases and liquids.     

Selection criteria of induction machines for speed-sensorless drive applications

Induction motors, both three and single phase, are used extensively for adjustable-speed drives' applications. These machines are structurally very robust and are a primary source of motive power and speed control where DC machines cannot be used. For closed-loop control of these machines, sensorless speed estimation is usually preferred. Among the current estimation techniques available for speed-sensorless induction motor drives, speed measurement based on rotor-slot-related harmonic detection in machine line current happens to be a prominent one. While these harmonics can be strong in certain kinds of machines, some other machines may exhibit very weak rotor slot harmonics that can be obscured by noise. Skewing, slot shapes and types, structural unbalances, etc., also have a prominent effect on the detectability of these harmonics. This paper attempts to investigate this problem based on the interaction of pole pairs, number of rotor bars, and stator winding. Although the analysis and experimental results have been mainly provided for three-phase squirrel-cage induction motors, single-phase and slip-ring induction motors have also been addressed. Further, it has been shown that eccentricity-related fault detection could also be easily accommodated with this kind of speed detection technique at no or negligible extra cost when certain motors are selected.     

Real-time classification of rotating shaft loading conditions usingartificial neural networks

Vibration analysis can give an indication of the condition of a rotating shaft highlighting potential faults such as unbalance and rubbing. Faults may however only occur intermittently and consequently to detect these requires continuous monitoring with real time analysis. This paper describes the use of artificial neural networks (ANNs) for classification of condition and compares these with other discriminant analysis methods. Moments calculated from time series are used as input features as they can be quickly computed from the measured data. Orthogonal vibrations are considered as a two-dimensional vector, the magnitude of which can be expressed as time series. Some simple signal processing operations are applied to the data to enhance the differences between signals and comparison is made with frequency domain analysis.     

Selective greedy routing: exploring the path diversity in backbone mesh networks

This paper proposes a new routing protocol for IEEE 802.11s wireless mesh network to overcome the problems associated with the conventional proactive and reactive routing approaches. The proposed ‘Selective Greedy’ (SelG) routing protocol operates in two phases. In the first phase it exploits the proactive mode of Hybrid Wireless Mesh Protocol, the standard routing protocol for IEEE 802.11s mesh, and constructs a set of potential forwarders for every mesh point, that can act as the next-hop relay. In the second phase, during the actual data communication, a candidate is selected from the set of potential forwarders based on a local optimization. The optimization procedure considers the statistical effect of local link quality fluctuation and interference over the global routing path selection. This way the SelG protocol reduces the control packet flooding in the network (a major drawback for reactive protocols). At the same time, the optimization procedure captures the network dynamics, and thus avoids the possibility of routing based on stale information (a drawback for proactive protocols). The routing properties and the correctness of the SelG protocol is established theoretically, and the performance of the protocol is analyzed through simulation results. The proposed protocol is implemented in an indoor wireless mesh testbed, and the performance is evaluated and compared with other traditional approaches.     

Topology Management Ensuring Reliability in Delay Sensitive Sensor Networks with Arbitrary Node Failures

The lifetime of a sensor network is influenced by the efficient utilization of the resource constrained sensor nodes. The tree-based data gathering offers good quality of service (QoS) for the running applications. However, data gathering at the sink reduces the network lifetime due to a fast failure of highly loaded nodes. Loss of connectivity and sensing coverage affect the performance of the applications that demand critical QoS. In this paper, a data gathering tree management scheme has been proposed to deal with arbitrary node failures in delay-sensitive sensor networks. A load-balanced distributed BFS tree construction procedure has been introduced for an efficient data gathering. Based on the initial tree construction, a tree maintenance scheme and an application message handler have been designed to ensure the reliable delivery of the application messages. The correctness of the proposed scheme has been verified both theoretically and with the help of simulation. The proposed scheme offers low overhead, enhanced network lifetime and good QoS in terms of delay and reliability of the application messages.     

Impact behavior of aminosilane functionalized nanosilica based shear thickening fluid impregnated Kevlar fabrics

In the present work, two types of shear thickening fluids have been synthesized by using neat and aminosilane functionalized silica nanoparticles and their viscosity curves have been obtained by the rheometer. Based on the values of peak viscosity of synthesized shear thickening fluids, the surface functionalized nanosilica based shear thickening fluid has been chosen as a best candidate due to the high viscosity for impregnation into the neat Kevlar of different layers viz. four (04) and eight (08) layers for velocity impact study. The experimental investigations reveal high energy absorption of shear thickening fluid impregnated Kevlar as compared to the neat Kevlar. The maximum energy absorption 62 J is achieved corresponding to the initial velocity 154 m∙s⁻¹ for 08 layers shear thickening fluid impregnated Kevlar specimen. The data have also been analytically determined and validated with the experimental data. The experimental data have good agreement with the analytical data within the accuracy of around 15 to 20%. The present findings can have significant inferences towards the fabrication of shear thickening fluids using nanomaterials for numerous applications such as soft armors, dampers, nanofinishing and so forth.     

Cefuroxime-impregnated calcium phosphates as an implantable delivery system in experimental osteomyelitis

The study aimed to investigate the effectiveness of porous calcium phosphates viz., hydroxyapatite (HAp) and a bi-phasic calcium phosphate (BCP) with predominately β-tricalcium phosphate (β-TCP) prepared by aqueous solution combustion method impregnated with cefuroxime axetil for the treatment of experimental osteomyelitis and compared with parenteral treatment. In vitro release of the drug was tested for its sustained elution characteristics for 21 days in PBS (pH 7.2) and measured by HPLC. In the in vivo study, bone infection was induced in tibia of rabbits by inoculation of 1 ml (3 × 10⁶) CFU Staphylococcus aureus. On the 21st day, after the development of osteomyelitis, six animals were treated by filling the cavity with cefuroxime-impregnated HAp blocks (Group II), six animals with the same drug-impregnated β-TCP (Group III) and in six others, only cefuroxime (15 mg/kg twice daily) was injected parenterally 6 weeks (Group IV). Group I with six animals was kept untreated. Histologically, the signs of infection were found to subside by 3 and 6 weeks. Radiological evaluation with cefuroxime-impregnated HAp and β-TCP pointed out the disappearance of sequestrum and existence of newly formed bony specules. Concentration of cefuroxime in bone and serum as estimated by HPLC showed highest value on day 21 itself which reduced marginally by day 42 in both the groups and these values were higher than minimum inhibitory concentration (MIC) against S. aureus. Our findings suggest that bi-phasic calcium phosphates with predominately β-TCP content is a very efficient carrier material for antibiotic compounds even for refractory infections by S. aureus.