Thermogravimetric Study of the M-Co-O System: I, M = Ta and Nb at 1200°C

Phase equilibria in the Ta-Co-O and Nb-Co-O systems have been studied at 1200°C at oxygen partial pressures from 10^−0.68 to 10^−13.50 atm for the former and from 10^−0.68 to 10^−13.30 atm for the latter. In both systems, M₂CoO₆ and M₂Co₄O₉ are stable ternary compounds under the experimental conditions, and a new phase, Nb₅Co₂O₁₄, has been identified. The Ta-Co-O system is simple, whereas the Nb-Co-O system is somewhat more complicated because of the extra phase. The lattice constants of the ternary compounds have been determined and compared with previous values. The standard Gibbs energies of reactions have been determined using oxygen partial pressures in equilibrium with three solid phases.     

A digital automatic current control system based on an optimumassumed model

In this paper, a new ACR (automatic current regulator) scheme is introduced for brushless DC motors. It consists of a model closely resembling the motor and PWM inverter, an assumed rising pattern of the current, and a parameter estimation. Using the control scheme, the mean value of the motor current is kept at the reference current, and the transient current of the motor is kept equal to the rising pattern. For the disturbance, because of DC-line voltage change, the proportional path from the error to the duty cycle of the PWM signal stabilizes the ACR. This ACR scheme can be realized with a microcomputer     

Ten-user truly asynchronous gigabit OCDMA transmission experiment with a 511-chip SSFBG en/decoder

A ten-user truly asynchronous gigabit coherent-optical-code-division-multiple-access (OCDMA) transmission was experimentally demonstrated without using any timing coordination. The enabling technologies are a record-length 511-chip superstructured-fiber-Bragg-grating (SSFBG) en/decoder and a supercontinuum (SC)-based optical-thresholding technique to significantly suppress the signal interference beat noise as well as the multiple-access-interference (MAI) noise.     

Head to head polymers

Blends of poly(-caprolactone) with either head-to-head or head-to-tail poly (vinyl chloride) were prepared by solvent casting in the form of films and their glass transition temperatures were determined by DSC analysis. The DSC scans of the blends of both poly(vinyl chloride) isomers were very similar. For blends containing 25% and 50% of poly(-caprolactone), a single transition step, a T_g, was observed, whereas for a blend containing 75% of poly (-caprolactone) three transition steps were observed, one glass transition and also a crystallization and a melting transition.Part 19: H. Kawaguchi, J. Muggee, Y. Sumida and O. Vogl, Polymer (London), in press     

On the cultural guises of cognitive dissonance: The case of Easterners and Westerners.

Cognitive dissonance and effects of self-affirmation on dissonance arousal were examined cross-culturally. In Studies 1 and 2, European Canadians justified their choices more when they made them for themselves, whereas Asian Canadians (Study 1) or Japanese (Study 2) justified their choices more when they made them for a friend. In Study 3, an interdependent self-affirmation reduced dissonance for Asian Canadians but not for European Canadians. In Study 4, when Asian Canadians made choices for a friend, an independent self-affirmation reduced dissonance for bicultural Asian Canadians but not for monocultural Asian Canadians. These studies demonstrate that both Easterners and Westerners can experience dissonance, but culture shapes the situations in which dissonance is aroused and reduced. Implications of these cultural differences for theories of cognitive dissonance and self-affirmation are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Analysis of imazalil and its major metabolite in citrus fruits by GC-FTD

A simplified simultaneous analytical method of imazalil (IZ) and its major metabolite, alpha-(2,4-dichlorophenyl)-1H-imidazole-1-ethanol (IZM), in citrus fruits was developed, and commodities samples were investigated. A homogenate of citrus fruits was extracted with ethyl acetate under basic conditions. The crude extract was partitioned between 0.025 mol/L of sulfuric acid and ethyl acetate. The analytes were extracted from the aqueous fraction under basic conditions with ethyl acetate. The extract solution was purified with an ENVI-Carb cartridge, and then analyzed by GC-FTD and GC/MS. Recoveries of IZ and IZM added to grapefruit at the level of 0.05 microgram/g were 90.0 and 108.7%, and those in the case of lemon were 100.4 and 93.0%, respectively. The detection limits were 0.01 microgram/g in samples. By this method, IZ and IZM were analyzed in 46 citrus fruits on the market and were detected simultaneously in some samples.     

Penalty function approach for the mixed discrete nonlinear problems by particle swarm optimization

In this paper, the basic characteristics of particle swarm optimization (PSO) for the global search are discussed at first, and then the PSO for the mixed discrete nonlinear problems (MDNLP) is suggested. The penalty function approach to handle the discrete design variables is employed, in which the discrete design variables are handled as the continuous ones by penalizing at the intervals. As a result, a useful method to determine the penalty parameter of penalty term for the discrete design variables is proposed. Through typical mathematical and structural optimization problems, the validity of the proposed approach for the MDNLP is examined.     

The Wulff Shape of Alumina: II, Experimental Measurements of Pore Shape Evolution Rates

The rate at which a facetted tetragonal cavity of nonequilibrium shape approaches a cubic equilibrium (Wulff) shape via surface diffusion was modeled. The shape relaxation rate of a facetted stretched cylinder was also modeled. For the first geometry, only an approximate solution based on linearizing the mean potential difference between the source and sink facets was obtained. For the stretched cylinder, both an approximate and an exact solution can be obtained; the approximate solution underestimates the evolution rate by a factor of ∼2. To assess the applicability of the models, nonequilibrium shape pores of identical initial geometry (∼20 μm × 20 μm × 0.5 μm) were introduced into (0001), {10[Onemacr]2}, {1120}, and {100} surfaces of sapphire single crystals using microfabrication techniques, ion-beam etching, and hot pressing. The large (∼20 μm × 20 μm) faces of the pore are low-index surfaces whose nature is dictated by the wafer orientation. A series of anneals was performed at 1900°C, and the approach of the pore shape to an equilibrium shape was monitored. The kinetics of shape evolution are highly sensitive to the crystallographic orientation and stability of the low-index surface that dominates the initial pore shape. The measured variations of the pore aspect ratio were compared to those predicted by the kinetic model. The observations suggest that when the initial bounding surface is unstable, shape relaxation may be controlled by diffusion. However, surface-attachment-limited kinetics (SALK) appears to play a major role in determining the pore shape evolution rate in cases where the initial bounding surfaces have orientations that are part of the Wulff shape.     

Synthesis of Sn-Incorporated Folded Sheets Mesoporous Materials (Sn-FSM-16)

Sn-incorporated folded sheets mesoporous materials (Sn-FSM-16) with various contents of Sn were synthesized by using a mixture of water glass, SnCl₄ and NaOH as starting materials. Hexadecyltrimethyl-ammonium chloride (surfactant) was used to intercalate into the layered silicate. The reaction process was followed by measurements of XRD patterns of intermediates. The Sn-FSM-16 was formed via the following mechanism: (1) layered silicates such as - - and -Na₂Si₂O₅ were formed as intermediates by the calcination of the mixture of the starting materials; (2) the surfactant was intercalated into the layered silicates; (3) the surfactant-silicate complex with hexagonal structure was obtained as a precursor of Sn-FSM-16; (4) the precursor was calcined to decompose the surfactant in the interlayer and was changed to Sn-FSM-16. The structural aspect of Sn in Sn-FSM-16 was studied by XPS profiles of Sn 3d _5/2 and Si_2p, ²⁹ Si MAS NMR and FTIR. The content of Sn in Sn-FSM increased with increasing concentrations of both Sn and NaOH in the starting materials. The surface area of Sn-FSM-16 decreased with an increase of Sn content in Sn-FSM (1160–620 m²/g).     

Preparation of heterotactic-rich poly(methyl methacrylate) with narrow molecular weight distribution bytert-butyllithium/bis(2,6-di-tert-butylphenoxy)methylaluminum

Summary Polymerization of methyl methacrylate (MMA) withtert-butyllithium (t-C₄H₉Li) in toluene in the presence of aluminum alkoxides such as ethoxide,tert-butoxide and 2,6-di-tert-butylphenoxide, were examined at various Al/Li ratios. In the cases of ethoxide andtert-butoxide, predominantly isotactic polymers with broad molecular weight distribution were obtained. Combinations oft-C₄H₉Li and bis(2,6-ditert-butylphenoxy)methylaluminum [MeAl(ODBP)₂] were found to be an efficient initiating system for heterotactic polymerization of MMA, which gives PMMA rich in heterotactic triads up to 68% with narrow molecular weight distribution (Mw/Mn=1.09–1.17). End group analysis by¹H NMR indicated thatt-C₄H₉Li initiates the polymerization and MeAl(ODBP)₂ works as a stereospecific modifier. From stereosequence analysis of the heterotactic PMMA by¹³C NMR, it was found that the calculated pentad fractions from the first-order Markovian statistics (Pm/r=0.742, Pr/m=0.627) fitted the observed ones better than those from Bernoullian statistics. The glass transition temperature of the heterotactic PMMA was 13°C lower than that of syndiotactic PMMA, and the intrinsic viscosity in tetrahydrofuran was close to that of isotactic PMMA with a similar molecular weight but higher than that of syndiotactic PMMA.