Gazing Geometries: Modes of Design Thinking in Pre-Modern Central Asia and Persian Architecture

The architecture of the pre-modern Islamic world broadly identifies itself with geometric design. In erecting buildings, architects-engineers of the Islamic world utilized distinct modes of geometric projections vital to the spatial conception of the building. These representations identify three modes of design drawings: plans, revetments/vertical surfaces, and reflected ceiling plans. This paper will discuss these modes of drawings and their unique role in relation to the architectural “design thinking” traditions. Much has been examined regarding two-dimensional Islamic geometric patterns (girih), but little exists in terms of a comprehensive framework investigating various modes of geometric drawings in relation to formal, spatial, and tectonic conceptions of the architectural space. This paper fills a critical gap in the literature about Islamic architecture and examines this topic through primary resources and original pamphlets.     

In situ, noninvasive characterization of superhydrophobic coatings

Light scattering was used to measure the time-dependent loss of air entrapped within a submerged microporous hydrophobic surface subjected to different environmental conditions. The loss of trapped air resulted in a measurable decrease in surface reflectivity and the kinetics of the process was determined in real time and compared to surface properties, such as porosity and morphology. The light-scattering results were compared with measurements of skin-friction drag, static contact angle, and contact-angle hysteresis. The in situ, noninvasive optical technique was shown to correlate well with the more conventional methods for quantifying surface hydrophobicity, such as flow slip and contact angle.     

Adsorption Characteristics of Congo Red from Aqueous Solution onto Tea Waste

The feasibility of using tea waste (TW) as a low-cost adsorbent for the adsorption of an anionic dye (Congo red) from aqueous solution has been investigated. Adsorption in a batch process was conducted to study the effect of adsorbent dosage, initial dye concentration, contact time, pH, and temperature. The experimental data were analyzed by the Langmuir, Freundlich, and Temkin models. The adsorption system was best described by the Langmuir isotherm (R ² > 0.99). Adsorption kinetics followed a pseudo-second-order model (R ² > 0.99). The effect of mechanical treatment (vibratory mill) was also studied. The experimental results showed that using this physical treatment leads to an increase in the adsorption capacity of TW from 32.26 to 43.48 mg/g. Thermodynamic analyses revealed that the adsorption of Congo red on TW was endothermic and spontaneous in nature. The results indicated that TW can be employed as a potential low-cost adsorbent for the removal of Congo red from aqueous solution.     

Review: the latest advances in biomedical applications of chitosan hydrogel as a powerful natural structure with eye-catching biological properties

Journal of Materials Science - Chitosan is one of the natural cationic polymers with unique properties such as non-toxicity, biodegradability, biocompatibility, environmentally friendly that has...     

Theoretical Prediction With Numerical and Experimental Verification to Predict Crosswind Effects on the Performance of Cooling Towers

A simple theoretical model, validated against available numerical and experimental data in the literature, is presented to predict the effects of crosswind on the performance of natural draft dry cooling towers. The intersection of asymptote method, along with scale analysis, is used to find a closed-form solution for the airflow rate at the tower exit for given crosswind speeds. The total heat rejected under a windy condition is then calculated based on the air mass flow rate at the tower exit. This theoretical model allows for parametric studies and can generate accurate data. Interestingly, the model results, expected to be accurate within an order of magnitude, are more accurate than anticipated when compared to available experimental and numerical data in the literature. In fact, the maximum relative error is observed to be 15% when current theoretical predictions are compared to available experimental data. The results of this study will be useful for future work on the development of air-cooled condensers, especially for geothermal and solar thermal power plants in Australia.     

Evaluation of most similar neighbour and random forest methods for imputing forest inventory variables using data from target and auxiliary stands

We report the results from modelling standing volume, above-ground biomass and stem count with the aim of exploring the potential of two non-parametric approaches to estimate forest attributes. The models were built based on spectral and 3D information extracted from airborne optical and laser scanner data. The survey was completed across two geographically adjacent temperate forest sites in southwestern Germany, using spatially and temporally comparable remote-sensing data collected by similar instruments. Samples from the auxiliary reference stands (called off-site samples) were combined with random, random stratified and systematically stratified samples from the target area for prediction of standing volume, above-ground biomass and stem count in the target area. A range of combinations was used for the modelling process, comprising the most similar neighbour (MSN) and random forest (RF) imputation methods, three sampling designs and two predictor subset sizes. An evolutionary genetic algorithm (GA) was applied to prune the predictor variables. Diagnostic tools, including root mean square error (RMSE), bias and standard error of imputation, were employed to evaluate the results. The results showed that RF produced more accurate results than MSN (average improvement of 3.5% for a single-neighbour case with selected predictors), yet was more biased than MSN (average bias of 5.13% with RF compared to 2.44% with MSN for stem volume in a single-neighbour case with selected predictors). Combining systematically stratified auxiliary samples from the target data set with the reference data set yielded more accurate results compared to those from random and stratified random samples. Combining additional data was most influential when an intensity of up to 40% of supplementary samples was appended to the reference set. The use of GA-selected predictors resulted in reduced bias of the models. By means of bootstrap simulations of RMSE, the simulations were shown to lie within the applied non-parametric confidence intervals. The achieved results are concluded to be helpful for modelling the mentioned forest attributes by means of airborne remote-sensing data.     

Schools and skills of critical thinking for urban design

This paper explores possible ways in which urban design can engage with critical thinking and critical theory. After a brief explanation of the terms, with particular attention to the Frankfurt School of thought, it provides various answers to the question as to whether urban design is critical or not. One categorization applied to planning critical theory is then used to explain the potential for employing critical theories in urban design. Critical thinking skills are then argued to be helpful for enriching the literature of urban design in order to achieve better practice. The conclusion is that urban design can benefit from critical creativity, which is an embodiment of critical thinking within the limits imposed onto creativity. In this paper, the ways in which urban design can engage with both critical theory and with critical thinking are explored in order to achieve better critical creativity in the field.     

Revisiting the Squinch: From Squaring the Circle to Circling the Square

??Squaring the circle,?? constructing a square that has the same area in a given circle using compass and straightedge, has long been a subject for intellectual investigations among mathematicians and philosophers from antiquity to the pre-modern era. The search for this unattainable ideal articulation found its way into Persian architecture with a different approach: circling the square. This architectonic approach, complementing the philosophical view, started from the square at hand, the chamber, to the circle of the vault. The transformation of the cubic to the domical space is mediated through the squinch, intermediary structural element that unifies the two structures. The two seemingly opposite directions of transforming of one form to another (i.e., square to circle or vice versa) allude to the metaphysical and material attributes involved in this process. This paper discusses the mutual relationship between the intellectual and material transformations and the intermediary role of the squinch.     

Fast bio-inspired computation using a GPU-based systemic computer

Biology is inherently parallel. Models of biological systems and bio-inspired algorithms also share this parallelism, although most are simulated on serial computers. Previous work created the systemic computer – a new model of computation designed to exploit many natural properties observed in biological systems, including parallelism. The approach has been proven through two existing implementations and many biological models and visualizations. However to date the systemic computer implementations have all been sequential simulations that do not exploit the true potential of the model. In this paper the first ever parallel implementation of systemic computation is introduced. The GPU Systemic Computation Architecture is the first implementation that enables parallel systemic computation by exploiting the multiple cores available in graphics processors. Comparisons with the serial implementation when running two programs at different scales show that as the number of systems increases, the parallel architecture is several hundred times faster than the existing implementations, making it feasible to investigate systemic models of more complex biological systems.     

Entropy generation for forced convection in a porous saturated circular tube with uniform wall temperature

A numerical study is reported to investigate both the First and the Second Law of Thermodynamics for thermally developing forced convection in a circular tube filled by a saturated porous medium, with uniform wall temperature, and with the effects of viscous dissipation included. A theoretical analysis is also presented to study the problem for the asymptotic region applying the perturbation solution of the Brinkman momentum equation reported by (K. Hooman, K., A.A. Ranjbar-Kani, A perturbation based analysis to investigate forced convection in a porous saturated tube, Journal of Computational and Applied Mathematics 162 (2) (2004) 411–419.). Expressions are reported for the temperature profile, the Nusselt number, the Bejan number, and the dimensionless entropy generation rate in the asymptotic region. Numerical results are found to be in good agreement with theoretical counterparts.