Critical slowing down in lead magnesium niobate–zirconate ceramic

Dielectric relaxation behaviour of (1 − x)PMN − xPZ, for x = 0.10, 0.30 and 0.40 have been studied. The nature of relaxational behaviour was found to change with PZ concentration. A crossover from a static freezing to critical slowing down like behaviour is observed with increase in Zr⁴⁺ concentration. We have used Glazounov and Tangastev criterion to distinguish freezing and critical slowing down like behaviour.     

Lean philosophy: implementation in a forging company

This research addresses the implementation of lean philosophy in a forging company with a focus on radial forging production flow lines. Here, the prime motive is to evolve and test several strategies to eliminate waste on the shop floor. In this research, a systematic approach is suggested for the implementation of lean principles. This paper describes an application of value stream mapping (VSM). Consequently, the present and future states of value stream maps are constructed to improve the production process by identifying waste and its sources. Furthermore, Taguchi’s method of design of experiments is pursued here to minimize the forging defects produced due to imperfect operating conditions. A noticeable reduction in set-up time and work-in-process (WIP) inventory level is substantiated. Finally, we conclude with a discussion of managerial implications and the future scope of research.     

Negative priming in associative learning: Evidence from a serial-conditioning procedure.

Three experiments investigated the suggestion that a predicted or primed stimulus commands less processing and consequently elicits a weaker CR than a stimulus that is not primed. In each experiment rats received initial training in which the presentation of each of 2 serial compounds, A-X and B-Y, was followed by the delivery of food. Subsequently, X's capacity to elicit the CR, approaching the site of food delivery, was assessed when X was preceded by Stimulus A (i.e., primed) or was presented after Stimulus B. Stimulus X elicited a more vigorous response when it was presented after B than when it followed A. These results show that the ability of one event to elicit its CR is reduced if its presentation has been predicted by some other event. This negative priming effect supports one aspect of A. R. Wagner's (1981) model of Pavlovian conditioning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Solution-Processed n-Type Organic Field-Effect Transistors With High on /off Current Ratios Based on Fullerene Derivatives

Solution-processed n-type organic field-effect transistors (OFETs) based on the fullerene derivative {6}-1-(3-(2- thienylethoxycarbonyl)-propyl)-{5}-l-phenyl-[5,6]-C61 (TEPP) and phenyl-C61-butyric acid methyl ester (PCBM) in a multiring source/drain structure are reported. Devices with TEPP show high electron mobility up to 7.8 x 10^-2 cm²/Vs in the saturation regime for bottom-contact OFETs with Au S/D electrodes with a solution-processed fullerene derivative. The ON/OFF ratios reported in this letter, which are in the range of 10⁵ -10⁶, are among the highest values reported for such devices. This mobility is always higher compared to PCBM devices prepared in identical conditions. The mobility of TEPP and PCBM increased with increasing temperatures in the range of 100-300 K with activation energy of 78 and 113 meV, respectively, which suggests that the thermally activated hopping of electrons is dominant in TEPP.     

A unique method for reducing losses of bends in dielectric optical wave guide

The dielectric optical wave guide is finding growing attention at millimeter wave frequencies. However the dielectric optical waveguide radiates at bends and thus transmission loss increases. These radiations are in the outword direction of bends. This output radiation at output bends arises due to change in phase velocities of the propagating wave at the centre of the dielectric guide and the phase velocity at the outer surface of the dielectric guide. A unique methiod is suggested to avoid these radiation losses.Experimental results are also shown at microwave frequencies.     

Dielectric behaviour of glasses and glass ceramics in the system BaO-PbO-TiO2-B2O3-SiO2

Glasses with varying molar ratios of PbO/BaO in the system BaO-PbO-TiO₂-B₂O₃-SiO₂ were prepared keeping (BaO + PbO)/TiO₂ ratio equal to one. The glasses were ceramized by two-stage heat treatment. X-ray diffraction indicates that PbTiO₃ crystallizes in lead-rich glasses while BaTiO₃ precipitates in barium-rich compositions. Solid solution (Ba, Pb)TiO₃ does not seem to crystallize over the entire range of compositions. Simultaneous presence of PbO and BaO in the initial glass composition reduces the yield of ferroelectric phase. Dielectric properties have been interpreted in terms of microstructural features.     

Countercurrent water-heating system with a heat exchanger in a solar energy collector loop

The counter current heat exchanger theory with periodic inlet temperatures has been applied to analyze the thermal performance of a water heating system. The theoretical results obtained are in agreement with the experimental data reported in the literature.     

Consensus-based data replication protocol for distributed cloud

The Journal of Supercomputing - Data availability ensures efficient data accessibility by the readers anytime and from anywhere. It can be addressed by creating multiple copies of each data file...     

Studies on high-performance blended/multiblended cements and their durability characteristics

Number of blends were prepared by intergrinding clinker, gypsum, fly ash, calcined clay, microsilica and limestone in laboratory ball mill in varying percentages, and their physical properties such as fineness, consistency, setting time and compressive strength have been determined. The durability tests on selected compositions were also conducted by exposing the mortar cubes separately in 5% Na₂SO₄ and 5% NaCl solutions till the age of 90 and 180 days. The performance was observed by compressive strength development criteria after various length of exposure. Results have been discussed and found that the durability of blended cement is higher than the ordinary Portland cement.     

A data mining approach to characterize road accident locations

Data mining has been proven as a reliable technique to analyze road accidents and provide productive results. Most of the road accident data analysis use data mining techniques, focusing on identifying factors that affect the severity of an accident. However, any damage resulting from road accidents is always unacceptable in terms of health, property damage and other economic factors. Sometimes, it is found that road accident occurrences are more frequent at certain specific locations. The analysis of these locations can help in identifying certain road accident features that make a road accident to occur frequently in these locations. Association rule mining is one of the popular data mining techniques that identify the correlation in various attributes of road accident. In this paper, we first applied k-means algorithm to group the accident locations into three categories, high-frequency, moderate-frequency and low-frequency accident locations. k-means algorithm takes accident frequency count as a parameter to cluster the locations. Then we used association rule mining to characterize these locations. The rules revealed different factors associated with road accidents at different locations with varying accident frequencies. The association rules for high-frequency accident location disclosed that intersections on highways are more dangerous for every type of accidents. High-frequency accident locations mostly involved two-wheeler accidents at hilly regions. In moderate-frequency accident locations, colonies near local roads and intersection on highway roads are found dangerous for pedestrian hit accidents. Low-frequency accident locations are scattered throughout the district and the most of the accidents at these locations were not critical. Although the data set was limited to some selected attributes, our approach extracted some useful hidden information from the data which can be utilized to take some preventive efforts in these locations.