Application of novel extractants for actinide(III)/ lanthanide(III) separation in hollow-fibre modules

Separation tests using hollow-fibre modules were performed for the difficult selective extraction of trivalent actinides over fission lanthanides from acidic media. This article shows that with 2,6-di(5,6-dipropyl-1,2,4-triazin-3-yl)pyridine as the extractant, up to 94% americium could be extracted from 1.0 kmol/m³ HNO₃, with minimal lanthanide co-extraction. Using a synergistic mixture of bis(chlorophenyl)dithiophosphinic acid and tri-n-octyl phosphine oxide, tests were performed on extraction, lanthanide scrubbing and stripping. In the extraction test, up to 99.99% americium could be extracted from 0.5 kmol/m³ HNO₃, with approximately one third of the lanthanides being co-extracted. Mass transfer calculations using a consistent set of input data showed good agreement with the experiments.     

Numerical Modeling of Silicon Photodiodes for High-Accuracy Applications Part I. Simulation Programs

The suitability of the semiconductor-device modeling program PC-1D for high-accuracy simulation of silicon photodiodes is discussed. A set of user interface programs optimized to support high-accuracy batch-mode operation of PC-1D for modeling the internal quantum efficiency of photodiodes is also described. The optimization includes correction for the dark current under reverse- and forward-bias conditions before calculating the quantum efficiency, and easy access to the highest numerical accuracy available from PC-1D, neither of which is conveniently available with PC-1D’s standard user interface.     

The perceived effect of breakdown and repair on the performance of multiprocessor systems

It is argued that classical measures of computer system performance, for example mean response time, are inadequate in the context of fault-tolerant system design. Alternative, perception-based measures are proposed and theorems established describing their properties. Focus is directed upon the homogeneous M/M/m system in which total processor power is constrained by budget and processors are subject to failure and repair. A numerical technique for extracting both classical and perception-based measures from the associated two-dimensional Markov process is offered, along with bounds on time and space required for its execution. It is seen that the perception-based approach to system design can call for twice as many processors as the classical approach.     

Aryl Bis‐Sulfonamide Inhibitors of IspF from Arabidopsis thaliana and Plasmodium falciparum

2‐Methylerythritol 2,4‐cyclodiphosphate synthase (IspF) is an essential enzyme for the biosynthesis of isoprenoid precursors in plants and many human pathogens. The protein is an attractive target for the development of anti‐infectives and herbicides. Using a photometric assay, a screen of 40 000 compounds on IspF from Arabidopsis thaliana afforded symmetrical aryl bis‐sulfonamides that inhibit IspF from A. thaliana (AtIspF) and Plasmodium falciparum (PfIspF) with IC₅₀ values in the micromolar range. The ortho‐bis‐sulfonamide structural motif is essential for inhibitory activity. The best derivatives obtained by parallel synthesis showed IC₅₀ values of 1.4 μm against PfIspF and 240 nm against AtIspF. Substantial herbicidal activity was observed at a dose of 2 kg ha^?1. Molecular modeling studies served as the basis for an in silico search targeted at the discovery of novel, non‐symmetrical sulfonamide IspF inhibitors. The designed compounds were found to exhibit inhibitory activities in the double‐digit micromolar IC₅₀ range.     

Applications of Diglycolamide Based Solvent Extraction Processes in Spent Nuclear Fuel Reprocessing,Part 1: TODGA

Over the last decade there has been much interest in the applications of diglycolamide (DGA) ligands for the extraction of the trivalent lanthanide and actinide ions from PUREX high active raffinates or dissolved spent nuclear fuel. Of the DGAs, the N,N,N’,N’-tetraoctyldiglycolamide (TODGA) is the best known and most widely studied. A number of new actinide separation processes have been proposed based on extraction with TODGA. This review covers TODGA-based processes and extraction data, specifically focusing on how phase modifiers have been used to increase metal loading and thus enhance the operating process envelopes. Effects of third phase formation and the organic phase speciation are reviewed in this context. Relevant aspects of the extraction chemistry of important solvents (TODGA-modifier-diluent combinations) are described and their performances demonstrated by a consideration of the published flowsheet tests. It is seen that modifiers are successfully enabling the use of TODGA in actinide separation processes but to date the identification and testing of suitable modifiers has been rather empirical. There is a growing understanding of the fundamental chemistry occurring in the organic phase and how that affects extractant speciation and metal loading capacity but studies are still needed if TODGA-based flowsheets are to become an industrially deployable option for minor actinide (MA) recovery processes.     

Effects of fluctuating river flow on groundwater/surface water mixing in the hyporheic zone of a regulated,large cobble bed river

Physicochemical relationships in the boundary zone between groundwater and surface water (i.e. the hyporheic zone) are controlled by surface water hydrology and the hydrogeologic properties of the riverbed. We studied how sediment permeability and river discharge altered the vertical hydraulic gradient (VHG) and water quality of the hyporheic zone within the Hanford Reach of the Columbia River. The Columbia River at Hanford is a large, cobble‐bed river where water level fluctuates up to 2 m daily because of hydropower generation. Concomitant with river stage recordings, continuous readings were made of water temperature, specific conductance, dissolved oxygen and water level of the hyporheic zone. The water level data were used to calculate VHG between the river and hyporheic zone. Sediment permeability was estimated using slug tests conducted in piezometers installed into the river bed. The response of water quality measurements and VHG to surface water fluctuations varied widely among study sites, ranging from no apparent response to covariance with river discharge. At some sites, a hysteretic relationship between river discharge and VHG was indicated by a time lag in the response of VHG to changes in river stage. The magnitude, rate of change and hysteresis of the VHG response varied the most at the least permeable location (hydraulic conductivity (K) = 2.9 × 10^?4 cms^?1) and the least at the most permeable location (K = 8.0 × 10^?3 cms^?1). Our study provides empirical evidence that sediment properties and river discharge both control the water quality of the hyporheic zone. Regulated rivers, like the Columbia River at Hanford, that undergo large, frequent discharge fluctuations represent an ideal environment in which to study hydrogeologic processes over relatively short time periods (i.e. days to weeks) that would require much longer periods (i.e. months to years) to evaluate in unregulated systems. Copyright © 2006 John Wiley & Sons Ltd.     

The crippled queen placement problem

We describe the outcome of various combinations of choices made by individuals in the solution of a non-trivial combinatorial problem on a computer. The programs which result are analyzed with respect to execution speed, design time, and difficulty in debugging. The solutions obtained vary dramatically as a result of choices made in the overall design of the solution. Choices made at lower levels in the top-down tree of design choices seem to have less effect on the parameters analyzed. A tradeoff between mathematical effort in algorithm design, and program speed is evident, since some solutions required solution-time which grows exponentially with the case size, while another solution presented here gives a closed-form expression for the required answers for all large cases.     

On the Effective Deployment of Functional Formal Verification

We examine IBM's exploitation of formal verification using RuleBase—a formal verification tool developed by the IBM Haifa Research Laboratory. The goal of the paper is methodological. We identify an integrated methodology for the deployment of formal verification which involves three complementary modes: architectural verification, block-level verification, and design exploration.     

Evaluation of a fast neutron coincidence counter for the measurements of uranium samples

A fast neutron coincidence counter using BC454/BGO phoswich detectors has been evaluated for the purpose of rapid verification measurements of uranium items. This counter uses custom electronics to identify and count coincidence neutrons in the presence of background radiation. Measurements of uranium standards were performed to evaluate the counter. This counter is successful in measuring uranium items but has a low efficiency that results in minimal improvement over current technology. An optimized counter can be built with better performance capabilities, but it is recommended that newer technologies be used instead.