A new lateral MOS-gated thyristor with controlling base-current

A new lateral MOS-gated thyristor, called the Base-Current-Controlled Thyristor, is described. This device is designed so that most holes at the on-stage reach the P base through the floating P⁺ region adjacent to the P base and the on-state MOSFET. At the turn-off stage, the interruption of the hole current to the P base due to switching off the above MOSFET occurs simultaneously with the conventional turn-off operation. The concept of this device is verified experimentally by using the fabricated lateral device with the external MOSFET. This device exhibits a better trade-off relation between the on-state voltage and the turn-off time compared uith the conventional MOS-gated thyristor     

0.25 μm gate length CMOS devices for cryogenic operation

Under cryogenic operation, a low V_th realizes a high speed performance at a greatly reduced power-supply voltage, which is the most attractive feature of Cryo-CMOS. It is very important in sub-0.25 μm Cryo-CMOS devices to reconcile the miniaturization and the low V_th. Double implanted MOSFET's technology was employed to achieve the low V_th while maintaining the short channel effects immunity. We have investigated both the DC characteristics and the speed performance of 0.25 μm gate length CMOS devices for cryogenic operation. The measured transconductances in the saturation region were 600 mS/mm for 0.2 μm gate length n-MOSFET's and 310 mS/mm for 0.25 μm gate length p-MOSFET's at 80 K. The propagation delay time in the fastest CMOS ring oscillator was 22.8 ps at V_dd=1 V at 80 K. The high speed performance at extremely low power-supply voltages has been experimentally demonstrated. The speed analysis suggests that the sub-l0 ps switching of Cryo-CMOS devices will be realized by reducing the parasitic capacitances and through further miniaturization down to 0.1 μm gate length or below     

Fade duration analysis on earth-space paths at Ku-band in Fukuoka, Japan

Presented are the fade duration dynamics as observed in four close stations. Fade duration statistics derived from the collected received signal during a critical period in the region are presented and analysed. The obtained results are compared with the model release by the ITU-R P.1623 recommendation. Some modifications are then proposed.     

Thermal expansion behavior of various aromatic polyimides

The thermal expansion behavior for various aromatic polymides was investigated. Usally polymers, including polyimides, have high thermal expansion coefficients (3–6 × 10^?5 K^?1), compared with metals and ceramics. However, there are some polyimides which have very low thermal expansion coefficients below 1 × 10^?5 K^?1. This property was observed for the polymides obtained from pyromellitic dianhydride or 3,3′ 4,4′-biphenyltetracarboxylic dianhydride and aromatic diamines which were constituted of only benzene rings fused at para positions. It was proposed that their low thermal expansion coefficient related to the linearity in their polymer molecular skeltons.     

Retardation of volatile aldehyde formation in the exhaust of frying oil by heating under low oxygen atmospheres

Volatile aldehydes were generated in the exhaust of high-oleic safflower oil during heating at 180°C by spraying water into atmospheres with four levels of oxygen concentrations (2, 4, 10, and 20%). These aldehydes were quantitatively analyzed by HPLC after the conversion to 2,4-dinitrophenyl hydrazones. Ten alkanals (C₂ through C₁₀), eight 2-alkenals (C₃ through C₁₀) and three 2,4-alkadienals (C₇, C₉, and C₁₀) were found. These aldehyde levels were found to be positively correlated with both the heating time and the atmospheric oxygen concentration. The total amounts of aldehydes were the lowest in the oil heated in an atmosphere with 2% O₂, and corresponded to 1/10 of those in the atmosphere with 20% O₂. Acrolein was not found in oils heated in the atmosphere with 2% oxygen. These results suggest that frying in atmospheres with low oxygen levels can effectively decrease the generation of volatile aldehydes in the exhaust.     

Aging and availability of binocular disparity and pictorial depth cues in 3D graphics contents

Some stereoblind observers do not perceive depth of 3D stimuli that depends on binocular disparity. These individuals, who have no disabilities, comprise over 5% of the general population. In addition, 17–30% of nonstereoblind young and young–middle people do not use disparity information in certain 3D environments, a phenomenon known as pseudo‐stereoblindness. This study aimed to investigate the relationship between aging and the proportion of pseudo‐stereoblindness in the general population. In an experiment, 134 nonstereoblind participants, ranging in age from 17 to 83 years, judged subjective depth of 3D stimuli containing binocular disparity and pictorial depth cues. Results showed that the proportion of pseudo‐stereoblindness among young (17–24 years old) and young–middle aged observers (25–39 years old) was 29%, in both cases. However, the proportion of pseudo‐stereoblind observers increased in older populations: 65% and 82% in the middle (40–54 years old) and senior (55–83 years old) age groups, respectively. These results suggest that a number of people, especially in elderly populations, have trouble perceiving depth from binocular disparity in 3D graphic contents despite their essential ability to use disparity information.     

Time Averaging Algorithms with Stopping Rules for Multi‐Agent Consensus with Noisy Measurements

A time averaging technique is introduced to consensus algorithms in networked multi‐agent systems under a noisy environment. Each agent communicates with its neighboring agents via a constant gain, while the time averaging states of the agents are considered as the values for agreement. The variation of the time averaging states then is evaluated at a specific number of iterations, where the number is given explicitly in terms of parameters related to the consensus accuracy and its probabilistic guarantee. This result establishes a rigorous stopping rule for the multi‐agent consensus with noisy measurements. Several results on this type of stopping rules are provided for undirected, directed, and time‐varying communication graphs. These theoretical results are illustrated through numerical examples.     

Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

A Consensus Protocol over Noisy Two‐Layered Networks with Cooperative and Antagonistic Interactions

This study is concerned with the consensus problems of multi‐agent systems with cooperative and antagonistic noisy interactions described by two‐layered network. That is, each agent is simultaneously influenced by the force of attraction and repulsion between each neighboring agents in cooperative and antagonistic layers. A distributed algorithm for achieving the consensus in a probabilistic sense is proposed and its sufficient conditions are clarified. The conditions tell us rigorous stopping rules which enable us to know the number of iterations that achieves consensus within a prespecified accuracy and probability. Some applications of consensus problems with cooperative and antagonistic interactions are shown through numerical examples.