Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

Threshold for Millimeter-Wave (60 GHz)-Induced Ocular Injury

Journal of Infrared, Millimeter, and Terahertz Waves - Millimeter waves (MMW) absorbed by skin or cornea may induce damage by heat. We have developed a 60 GHz MMW exposure-induced eye...     

Optimized laser processing of calibration blocks for grinding burn detection with Barkhausen noise

Calibration samples for the Barkhausen noise (BN) method were produced with laser processing. A planet gear wheel used for production quality control was subjected to laser irradiation to verify the BN sensor output. Different samples were found to respond similarly to the laser processing although the laser parameters needed to be adjusted for different surface qualities separately. The surface optimization for laser processing was studied with different surface qualities of samples. The ground surface was compared with a sandblasted and vibratory ground surface. The ground and sandblasted surfaces were both amenable to the laser processing whereas the vibratory grinding process created inhomogeneous surfaces for laser beam absorption. Laser processing was found to produce uniform changes in the residual stress values in two perpendicular measuring directions. The root mean square value of the BN voltage signal exhibited linear correlations with the values of the residual stress and surface hardness.     

Loss of H19 imprinting and up-regulation of H19 and SNRPN in a case with malignant mixed Müllerian tumor of the uterus

An unusual clinical presentation of a patient with neuronal intestinal dysplasia is presented. A 46-year-old male noted a palpable mass in the right lower quadrant of his abdomen for two months. A computed axial tomographic scan showed a thickened wall of the cecum with a tumor-like appearance. The excised specimen consisted of a mass caused by the thickened, edematous wall of the dilated cecum and appendix. The wall of the cecum and appendix measured up to 2.5 and 0.8 cm, respectively, in thickness. Microscopic studies showed extensive hyperplasia and hypertrophy of the ganglia and nerve plexuses and hypertrophy of the muscularis propria, consistent with neuronal intestinal dysplasia.     

Enzymatic Analysis of Positional Distribution of Fatty Acids in Solid Fat by 1,3-Selective Transesterification with Candida antarctica Lipase B

A protocol for the analysis of the positional distribution of fatty acids (FA) in solid triacylglycerols (TAG) was developed using sn-1(3) selective alcoholysis catalyzed by immobilized Candida antarctica lipase B (CALB). One part by weight of solid fat and ten parts by weight of ethanol (99.5 %) were warmed to liquefy the fat. After adding 0.44 parts by weight of CALB, the mixture was shaken at 50 °C for 10 min then at 30 °C for 2.8 h. The recovery of 2-MAG after the 3-h transesterification reaction was ca. 85 % of the maximum theoretical yield (33 mol%), with the loss of 15 % attributable to the acyl migration from sn-2 to sn-1(3). The recovery was similar to that of the solvent-free alcoholysis of structured lipids, 1,3-dipalmitoyl, 2-oleoyl glycerol and 1,3-dioleoyl, 2-palmitoyl glycerol, conducted at 30 °C for 3 h. In contrast, the acyl migration from sn-1(3) to sn-2 was hardly observed. Because the detected acyl migration was only in the direction of sn-2 to sn-1(3), and not vice versa, it is proposed to determine the FA composition of the sn-2 position of TAG by the gas chromatographic analysis of 2-MAG fraction recovered from the enzymatic reaction mixture, and the FA composition of sn-1(3) position by a mass balance using the FA composition of TAG and of the sn-2 position as inputs. The procedure was successfully applied to palm oil and shea butter, and docosahexaenoic acid (DHA)-rich single cell oil from Aurantiochytrium sp. KH105 for the first time.     

An Efficient Procedure for Identifying the Prediction Model Between Residual Stress and Barkhausen Noise

Residual stress of case-hardened steel samples is predicted in this paper with the linear multivariable regression model. The development of the prediction model is based on the huge set of features calculated from the Barkhausen noise measurement signal among which the most suitable ones are chosen. The selection uses a genetic algorithm with leave-multiple-out cross-validation in the objective function. The original feature set contains collinear features that make the selection task even more complex. Thus a feature elimination procedure based on the successive projections algorithm is studied in this paper. Also the standard genetic algorithm is slightly modified to better serve the feature selection task. The obtained results are good showing that the proposed procedures suit well for residual stress predictions. Also the applied feature elimination procedure is applicable and can be safely used to reduce the dimensionality of the selection problem.     

Purification and characterization of sea squirt alpha-N-acetylgalactosaminidase

Sea squirt alpha-N-acetylgalactosaminidase was purified to homogeneity. Its molecular weight was estimated to be approximately 160,000 by gel filtration and 40,000 by SDS-polyacrylamide gel electrophoresis (SDS-PAGE) under reducing condition. The chromatographic and electrophoretic behaviors indicated that the enzyme was composed of four subunits. The optimum pH of the enzyme reaction was about 4.0 at 37 degrees C, while the enzyme was stable in the range of pH 5.0 to 6.0 during 4 h preincubation at 37 degrees C. Although the enzyme (0.1 unit) was stable at 0 degrees C for 30 min in the presence of 7.5 mM metal ions (Al3+, Ba2+, Ca2+, K+, Mn2+, Pb2+, Sr2+, and Zn2+), almost 40% of the enzyme activity was lost in the presence of Cu2+, Hg2+, monoiodoacetic acid, and EDTA. The enzyme hydrolyzed aryl N-acetyl-alpha-D-galactosaminide as well as GalNAcalpha1(-->4GalNAcalpha1-->)n 4GalNAc-p-aminobenzoic acid ethyl ester (ABEE) (n = 1-4), but GalNAcalpha1-->4GalNAc-ABEE only scarcely. Furthermore, an allergenic pentasaccharitol ABEE derivative, GalNAcalpha1-->2Fucalpha1-->3(GalNAcbeta1-->4) GlcNAcbeta1-->2(3-acetoamido-3-deoxy)L-threose-ABEE, the minimum structural unit for the sea squirt allergenicity was hydrolyzed to 95 mol% for 72 h incubation with the enzyme. The enzyme could be utilized as a powerful tool for the structural analyses of the carbohydrate epitopes of the sea squirt allergen molecules.