1/f Noise in dye-sensitized solar cells and NIR photon detectors

All electronic devices are plagued with 1/f noise originating from many causes. The most important factors contributing to 1/f noise in a semiconductor is believed to be recombination of carriers and their trapping at defects and impurity sites. Adsorption of moisture and electron acceptor molecules enhances the intensity of 1/f noise. Amazingly, some molecular species that strongly chelate to the semiconductor surface, suppress 1/f noise owing to passivation of the recombination sites. Thus in addition to sensitization, the dye adsorbed on the nanocrystallites plays a key role in mitigation of recombinations. For this reason dye-sensitized heterojunctions could also find application as low noise NIR photon detectors. Experiments conducted with oxide semiconductors (TiO₂, ZnO, SnO₂) indicate that the mode of binding of dyes at specific sites determines the extent to which the recombination and 1/f noise are suppressed. The transport of electrons in a nanocrystalline matrix is diffusive with a diffusion coefficient D depending on the trapping and detrapping processes. Thus passivation of trapping sites by the adsorbed dye is expected to increase the response time which can be expressed as τ  L²/D, where L = thickness of the nanocrystalline film. Measurement techniques and construction of a dye-sensitized NIR photon detector will be discussed.     

Ion solvation in water clusters

We describe here molecular dynamics computer simulations performed to study the solvation of ions (Cl^? and Na⁺) in water clusters. Our simulations show that the calculated structure and dynamics of the clusters is very sensitive to the potential model which is used to describe the interactions. From the comparison with thermodynamic data and data from the photoelectron spectra we conclude that in Cl^?(H₂O)_n (n≤20) clusters the ion is located on the surface of the cluster.     

Anti-Inflammatory,Antidiabetic Properties and In Silico Modeling of Cucurbitane-Type Triterpene Glycosides from Fruits of an Indian Cultivar of Momordica charantia L.

Diabetes mellitus is a chronic disease and one of the fastest-growing health challenges of the last decades. Studies have shown that chronic low-grade inflammation and activation of the innate immune system are intimately involved in type 2 diabetes pathogenesis. Momordica charantia L. fruits are used in traditional medicine to manage diabetes. Herein, we report the purification of a new 23-O-β-d-allopyranosyl-5β,19-epoxycucurbitane-6,24-diene triterpene (charantoside XV, 6) along with 25ξ-isopropenylchole-5(6)-ene-3-O-β-d-glucopyranoside (1), karaviloside VI (2), karaviloside VIII (3), momordicoside L (4), momordicoside A (5) and kuguaglycoside C (7) from an Indian cultivar of Momordica charantia. At 50 µM compounds, 2–6 differentially affected the expression of pro-inflammatory markers IL-6, TNF-α, and iNOS, and mitochondrial marker COX-2. Compounds tested for the inhibition of α-amylase and α-glucosidase enzymes at 0.87 mM and 1.33 mM, respectively. Compounds showed similar α-amylase inhibitory activity than acarbose (0.13 mM) of control (68.0–76.6%). Karaviloside VIII (56.5%) was the most active compound in the α-glucosidase assay, followed by karaviloside VI (40.3%), while momordicoside L (23.7%), A (33.5%), and charantoside XV (23.9%) were the least active compounds. To better understand the mode of binding of cucurbitane-triterpenes to these enzymes, in silico docking of the isolated compounds was evaluated with α-amylase and α-glucosidase.     

Application of polyacrylonitrile-based polymer electrolytes in rechargeable lithium batteries

Polyacrylonitrile (PAN)-based polymer electrolytes have obtained considerable attention due to their fascinating characteristics such as appreciable ionic conductivity at ambient temperatures and mechanical stability. This study is based on the system PAN–ethylene carbonate (EC)–propylene carbonate (PC)–lithium trifluoromethanesulfonate (LiCF₃SO₃). The composition 15 mol% PAN–42 mol% EC–36 mol% PC–7 mol% LiCF₃SO₃ has shown a maximum room temperature conductivity of 1.2?×?10^?3 S cm^?1. Also, it was possible to make a thin, transparent film out of that composition. Cells of the form, Li/PAN–EC–PC–LiCF₃SO₃/polypyrrole (PPy)–alkylsulfonate (AS) were investigated using cyclic voltammetry and continuous charge–discharge tests. When cycled at low scan rates, a higher capacity could be obtained and well-defined peaks were present. The appearance of peaks elucidates the fact that redox reactions occur completely. This well proves the reason for higher capacity. The average specific capacity was about 43 Ah kg^?1. Cells exhibited a charge factor close to unity during continuous charging and discharging, indicating the absence of parasitic reactions.     

Application of the Tris(acetylacetonato)iron(III)/(II) Redox Couple in p‐Type Dye‐Sensitized Solar Cells

An electrolyte based on the tris(acetylacetonato)iron(III)/(II) redox couple ([Fe(acac)₃]^0/1?) was developed for p‐type dye‐sensitized solar cells (DSSCs). Introduction of a NiO blocking layer on the working electrode and the use of chenodeoxycholic acid in the electrolyte enhanced device performance by improving the photocurrent. Devices containing [Fe(acac)₃]^0/1? and a perylene–thiophene–triphenylamine sensitizer (PMI–6T–TPA) have the highest reported short‐circuit current (J_SC=7.65 mA cm^?2), and energy conversion efficiency (2.51 %) for p‐type DSSCs coupled with a fill factor of 0.51 and an open‐circuit voltage V_OC=645 mV. Measurement of the kinetics of dye regeneration by the redox mediator revealed that the process is diffusion limited as the dye‐regeneration rate constant (1.7×10⁸ M ^?1 s^?1) is very close to the maximum theoretical rate constant of 3.3×10⁸ M ^?1 s^?1. Consequently, a very high dye‐regeneration yield (>99 %) could be calculated for these devices.     

Recent developments in the radiation chemistry of elastomers

The radiation chemistry of several elastomers has been reviewed, including that of polybutadiene, polyisoprene, polyisobutylene, halogenated rubbers, ethylene-alkene copolymers and a range of polyurethanes. The properties investigated include the yields of volatile products and radicals and the new chemical structures formed on radiolysis. The roles of double bonds and hetero-atoms, such as chlorine, in the radiation chemistry of the elastomers has also been discussed.     

Behind the success of modified coupled-cluster methods: addition by subtraction

ABSTRACT

Modified coupled-cluster (CC) methods such as linearized coupled-cluster doubles (LinCCD), approximate coupled pair (ACP D14), 2CC (from nCC family), parameterized CCSD (pCCSD) and distinguishable cluster (DCSD) can have their advantages over general CC methods. Though these methods include connected clusters of single and double excitations at most, distinguishable cluster, parameterized CC and approximate coupled pair methods, in particular, have been shown to produce quantitatively correct results in benchmark studies. To put these methods on a stronger foothold, it is essential to understand the rationale for their success: mimicking the effect of connected triple excitations. We exploit the relation between CC and many body perturbation theory (MBPT) in general, and between CCSD and MBPT(4)/MP4 in particular, to take a step towards bringing clarity to this persisting conundrum. Our aim here is to look for numerical signs of ‘addition by subtraction’ or ‘inclusion by deletion’ effect that is likely behind the success of these modified CCD or CCSD methods. We achieve this by revisiting well-studied examples of single and multiple bond dissociation and comparing the performance of these modified CCSD methods with higher-level CC methods. Though our results are qualitative in nature, we hope this would lead to more rigorous analysis in future studies.