Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

Vibrational Spectroscopic Studies on the tn-Td-Type Mn(tn)Zn(CN)4_2C6H6 and the Chelated tn-Td-Type Zn(tn)Zn(CN)4_2C6H6 Clathrates

IR spectra of Mn(trimethylenediamine)Zn(CN)₄2C₆H₆ and IR and Raman spectra of Zn(trimethylenediamine)Zn(CN)₄_2C₆H₆ are reported. The spectral data suggest that the host frameworks of these compounds are similar to those of the tn-Td-type Cd(trimethylenediamine)M(CN)₄_2benzene (M = Cd or Hg) and the chelated pn-Td-type Cd(propylenediamine)Cd(CN)₄_1,2-dichloro-ethane clathrates, respectively.     

Übergangsmetall—methylen-komplexe: LXI. Übergangsmetall—vinyliden-komplexe: Neuartige synthese aus diazoalken-vorstufen

The diazoolefines of composition N₂CCR₂ (R/R = CH₃/CH₃ and(-CH₂-)₅) are suitable precursors of the corresponding vinylidene ligands CCR₂. Thus, treatment of the RhRh complex [(η⁵-C₅Me₅)Rh(μ-CO)]₂ (1) with the N-nitrosourethanes 2a and 2b, resp., in the presence of lithium t-butoxide yields the otherwise inaccessible μ-vinylidene complexes (μ-CCR₂)[(η⁵-C₅Me₅)Rh(CO)]₂ (R = CH₃ (3a), R,R = (-CH₂-)₅ (3b)). The analogous cobalt compound (μ-CCMe₂)[(η⁵-C₅Me₅)Co(CO)]₂ (5a) is obtained similarly. This procedure extends the well-documented diazoalkane method for the synthesis of μ-alkylidene complexes to the less stable diazoalkenes. A single-crystal X-ray diffraction study of the dimethylvinylidene derivative 3a shows the CMe₂ ligand to adopt an almost symmetrically metal-bridging position (d(RhC) 197.8(1) and 204.3(1) pm), with a rhodium-rhodium single bond completing a three-membered Rh₂C-metallacycle (d(RhRh) 268.4(0) pm) analogous with cyclopropane.     

Determination of bismuth, indium and lead in geological samples by electrothermal AAS Part 2. Comparative study of palladium and molybdenum containing chemical modifiers*

A comparative and systematic study has been carried out of the effects of palladium and molybdenum containing chemical modifiers, such as Pd + Rh, Pd + Pt, Pd + Ru, Pd + Rh + Pt, Pd + Rh + Ru, Mo + Pd, Mo + Rh, Mo + Ru and Mo + Pt and additionally tartaric acid (TA) as a reducing agent together with mixed modifiers for the thermal stabilization of Bi, In and Pb in a Zeeman electrothermal atomic absorption spectrometer (ETAAS). The effect of the mass ratios of the mixed modifier components on the maximum pretreatment temperature for the analytes has been determined. The modifier mixtures of Pd + Rh + Pt, Mo + Pd + TA and Mo + Pt + TA were found to be especially powerful for the determination of Bi, In and Pb. These mixed modifiers could increase the ashing temperatures of the analytes up to 1250–1400° C. They were applied to the determination of Bi and Pb in dissolved geological reference samples and accuracy and precision of the method were thereby enhanced. The percent relative error was decreased from 20.0 to 0.4 for Bi and from 10.5 to 0.3 for Pb, depending on the sample type. Received: 9 May 1997 / Revised: 19 August 1997 / Accepted: 20 August 1997     

Synthesis,Crystal Structure,and Electrochemical Behaviour of an Azido μ‐bridged Ni2+ Complex

A homo‐dinuclear Ni^II complex was prepared from 2, 6‐bis(3, 5‐dimethylpyrazolyl)pyridine (Me₄‐bpp) and azide ions in nonaqueous media. It was characterized by single crystal X‐ray structural analysis, IR spectroscopy, and elemental analysis. In addition, the electrochemical properties of the compound were determined with cyclic voltammetry in DMF. The title compound crystallizes in the P2₁/n monoclinic space group, with unit cell parameters a = 8.978(1), b = 12.459(1), c = 17.764(1) Å, ß =100.603(3)°, V = 1953.0(3) ų, Z = 2. The Ni²⁺ ion has a distorted octahedral environment involving three nitrogen atoms of the Me₄‐bpp ligand, two nitrogen atoms from the bridged azide group, and one nitrogen atom from the terminal azide group. The Ni···Ni distance is 3.273(5) Å.     

Determination of adsorptive properties of clay/water system: methylene blue sorption

In this study, adsorption of methylene blue onto clay was investigated. The effect of adsorption time and temperature on the adsorption process was studied. To reveal the adsorptive characteristics of the clay studied, porosity and BET surface area measurements were made. It was observed that the adsorption capacity decreases with increasing temperature, and adsorption equilibrium was attained within 1 h. It was found that the data fit well to Langmuir, Halsey, Henderson, and Harkins-Jura models but experimental data deviate significantly from BET and Freundlich models at especially high concentrations. Furthermore, isosteric adsorption enthalpy and entropy are calculated as -7.99 kJ mol(-1) and 25.41 JK(-1)mol(-1), respectively.     

trans‐Diaquabis(3‐hydroxybenzoato‐κO1)bis(nicotinamide‐κN1)copper(II)

The title compound, [Cu(C₇H₅O₃)₂(C₆H₆N₂O)₂(H₂O)₂], is a two‐dimensional hydrogen‐bonded supramolecular complex. The Cu^II ion resides on a centre of symmetry and is in an octahedral coordination environment comprising two pyridine N atoms, two carboxylate O atoms and two O atoms from water molecules. Intermolecular N—H...O and O—H...O hydrogen bonds produce R₂²(4), R₂²(8) and R₂²(15) rings which lead to one‐dimensional polymeric chains. An extensive two‐dimensional network of N—H...O and O—H...O hydrogen bonds and C—H...π interactions are responsible for crystal stabilization.     

Three (E)‐2‐[(bromo­phen­yl)imino­meth­yl]‐4‐methoxy­phenols

The title compounds, (E)‐2‐[(2‐bromo­phenyl)imino­methyl]‐4‐methoxy­phenol, C₁₄H₁₂BrNO₂, (I), (E)‐2‐[(3‐bromo­phenyl)­imino­methyl]‐4‐methoxy­phenol, C₁₄H₁₂BrNO₂, (II), and (E)‐2‐[(4‐bromo­phenyl)imino­methyl]‐4‐methoxy­phenol, C₁₄H₁₂BrNO₂, (III), adopt the phenol–imine tautomeric form. In all three structures, there are strong intra­molecular O—H⋯N hydrogen bonds. Compound (I) has strong inter­molecular hydrogen bonds, while compound (III) has weak inter­molecular hydrogen bonds. In addition to these inter­molecular inter­actions, C—H⋯π inter­actions in (I) and (III), and π–π inter­actions in (I), play roles in the crystal packing. The dihedral angles between the aromatic rings are 15.34 (12), 6.1 (3) and 39.2 (14)° for (I), (II) and (III), respectively.     

The first bis(orotato–N,O) complex: Synthesis,crystal structure,spectroscopic and thermal characterization of (chaH)2[Cu(HOr–N,O)2(cha)] · 2H2O (cha = cyclohexylamine and HOr = orotate(2−))

The novel bis(cyclohexylaminium) cyclohexylaminebis(orotate–N,O)cuprate(II) dihydrate, (C₆H₁₅N)₂[Cu(C₅H₂N₂O₄)₂(C₆H₁₄N)] · 2H₂O, has been prepared and characterized by elemental analysis, magnetic measurements, FT-IR and UV–Vis spectroscopy, thermal analysis and X-ray diffraction. The Cu(II) complex crystallizes in the monoclinic space group P2₁/c. The copper atom in the five-coordinated (chaH)₂[Cu(HOr–N,O)₂(cha)] · 2H₂O is chelated by a deprotonated pyrimidine nitrogen atom and carboxylate oxygen atom as a bis(bidentate) ligand and the cyclohexylamine ligand completes the square-pyramidal coordination. The thermal decomposition of the complex has been predicted by the help of thermal analysis (TG, DTG and DTA).