Sensitive monitoring of humic acid in various aquatic environments with acidic cerium chemiluminescence detection.

In this research, a simple, sensitive chemiluminescence (CL) method for the determination of humic acid (HA) in water samples was first developed based on the redox reaction between humic acid and cerium(IV) in the acidic condition. Different with the former redox CL reaction which occurred in alkaline solution, no enhancers were needed and neither precipitation nor a second contamination would occur in the present CL system. Comparing with other spectrometric methods, we find that the proposed analysis system had better applicability and accuracy. Under the optimal experiment conditions, the CL peak height was linear with the concentration of HA in the range of 0.03 to 10.0 microg mL(-1). The detection limit is 0.01 microg mL(-1) (S/N = 3), and the relative standard deviation was 2.3% for 0.5 microg mL(-1) HA solution with eleven repeated measurements. The present CL method was successfully applied to the determination of HA in tap water, spring water and river water samples with good recovery from 90.0 to 110.0%. A possible CL mechanism was proposed based on the results of UV and fluorescence spectrometry and the CL spectrum of HA. It was speculated that the semi-quinone radicals in the excited state were the emitters.     

Bistable Behaviour of N Two-Level Atoms Interacting with the Field inside a High-Q Cavity Containing a Nonlinear Kerr-Like Medium

Taking the intensity-dependent coupling between atoms and cavity mode into account, we investigate a system consisting of N homogeneously broadened two-level atoms interacting with the field inside a single-mode Fabry- Perot cavity containing a nonlinear Kerr-like medium. We derive the steady-state bistable behaviour of the system, and further analyse in details the influence of several critical parameters on the bistable behaviour.     

Size of Micelles Determined by Static Fluorescence Quenching

We developed a new method to measure the average aggregation number of large rod-like micelles using static fluorescence self-quenching of a solubilized fluorophore. The method is based on the increase of self-quenching of micelle-solubilized pyrene through excimer formation. We consider the effect of random distribution of pyrene in micelles and the micellar size distribution. The measured average aggregation <n> _M is based on a new M-weighted raging similar to our exponential-weighted averaging in the transient decay method. We apply this method to study the effect of a large concentration of salt on the average aggregation behavior of sodium dodecyl sulfate (SDS) and cetyle tetraammonium bromide (CTAB). The sizes increase with increasing ionic concentrations. For SDS, we used the thermodynamic model developed by Missel et al. to calculate < n > _M which we compare with experimental results.     

Separation and determination of some stereoisomers by capillary gel electrophoresis with cyclodextrin incorporated in polyacrylamide gel

Capillary gel electrophoresis (CGE) was successfully applied to the separation of optically active isomers and position isomers by incorporating a suitable cyclodextrin chiral selector in polyacrylamide gel. A commercially available ß-cyclodextrin (ß-CD) was used for enantioselectivity towards o-, m- and p-nitrobenzoic acid, o-, m- and p-hydroxybenzoic acid, o-, m- and p-toluic acid and the optical isomers of dansyl-D,L-leucine and R,S-1,1-binaphthyl-2,2-dihydrogenphosphate. Especially the effect of organic solvents, such as acetonitrile, methanol, dimethylsulphoxide and others were examined in detail. The resolution varied to some extent with the addition of the organic solvent to the polyacrylamide gel and the running buffer solution. The possible mechanism has also been discussed. In addition, quantitative aspects of the separation of stereoisomers using CGE have been studied, showing that both the resolution and accuracy of the determinations were affected by the ratio of the enantiomers.     

A membrane separation technique for optimizing sample preparation of MALDI-TOF MS detection

Here, we report a new method based on the combination of membrane separation technology and nanomaterial to rapid detection of peptides and protein with MALDI-TOF MS. This method shows advantages as it can inhibit the heterogeneous of sample spot and enhance the target molecular signal intensity.     

Speciation analysis of inorganic arsenic by microchip capillary electrophoresis coupled with hydride generation atomic fluorescence spectrometry

A novel method for speciation analysis of inorganic arsenic was developed by on-line hyphenating microchip capillary electrophoresis (chip-CE) with hydride generation atomic fluorescence spectrometry (HG-AFS). Baseline separation of As(III) and As(V) was achieved within 54 s by the chip-CE in a 90 mm long channel at 2500 V using a mixture of 25 mmol l(-1) H3BO3 and 0.4 mmol l(-1) CTAB (pH 8.9) as electrolyte buffer. The precisions (RSD, n=5) ranged from 1.9 to 1.4% for migration time, 2.1 to 2.7% for peak area, and 1.8 to 2.3% for peak height for the two arsenic species at 3.0 mg l(-1) (as As) level. The detection limits (3sigma) for As(III) and As(V) based on peak height measurement were 76 and 112 microg l(-1) (as As), respectively. The recoveries of the spikes (1 mg l(-1) (as As) of As(III) and As(V)) in four locally collected water samples ranged from 93.7 to 106%.     

Fluorescence Probe Studies of Ionic Micelles in Concentrated Salt Solutions

We have investigated the effect of salt concentration and temperature on the average aggregation number and micro-polarity of the interior of micelles of sodium dodecyl sulfate (SDS). sodium tetradecyl sulfate (STDS) and lithium dodecyl sulfate (LiDS). The transient fluorescence decay of micelle-solubilized pyrene has been measured and analyzed. An exponent weighted average aggregation number <n>_e was obtained by this technique. For SDS and STDS in NaCl solution, <n>_e increases as the temperature is lowered or salt concentration is increased <n>_e increased from ～ 50 to ～ 250 over [NaCl] = 0 to 0.8 M. Due to the strong counterion binding of lithium in the micellar solution, the LiDS micelle is much, smaller and does not increase appreciabily even at [LiCl] =0.8 M. From the fluorescence spectrum fine structure of pyrene and the fluorescence decay of the monomer and excimer, we can understand the local polarity and the water penetration to the interior of the micelle upon addition of salts and with changing temperature. The interior of the micelle becomes more nonpolar as the salt concentration is increased and the temperature is lowered. A complete kinetic analysis of the time–dependence of the fluorescence is given. The kinetic analysis is in agreement with the results reached by fluorescence spectral analysis.     

Adsorption energy distribution model for VOCs onto activated carbons

An adsorption isotherm model was proposed for two types of volatile organic compounds (VOCs) on a heterogeneous carbon surface. The Langmuir isotherm was used as a local isotherm for describing heterogeneous surfaces to obtain the adsorption energy distribution. The adsorption temperature studied ranged from 30 to 50 degrees C, and the pressure of VOCs varied from 0 to 0.35 atm. The present model differed from previous studies in assuming that the pre-exponential factor was not to be a constant. The pre-exponential factors were determined directly from the experimental data, and the result empirically showed that the pre-exponential factor was correlated with the adsorption energy by a simple exponential function. We found that both adsorption energy distributions of two VOCs were essentially step functions over the restricted pressure range, indicating adsorbates on the carbon surface with its own uniform distribution. By incorporation of the energy distribution and the relationship between the pre-exponential factor and the adsorption energy, the adsorption isotherms for the two VOCs on the carbons can be well predicted.     

Determination of chloride ion by electrochemiluminescence and investigation of the mechanism

The electrochemiluminescence (ECL) of luminol in aqueous alkaline solution was studied.Trace amounts of chloride showed significant effect on the efficiency of light emission of luminol as a posi-tive trigonometrical wave pulse was exerted on the solution. The detection limit for the chloride is5.0 ×10~(-6) mol/L and the linear calibration range extends up to 1.0 ×10~(-2) mol/L; the relative standarddeviation for 1.0 ×10~(-5) mol / L chloride is 5%. The influencing factors for chloride determination arealso discussed. The possible mechanism for the electrochemiluminescence reaction may be due to theoxidation of chloride ion in the solution to ClO~-, and the latter acts on luminol and then gives outluminescence. The method has been applied to determine the total chloride in tap water with satisfactoryresults.