Synthesis, characterization, and stability of Fe-MCM-41 for production of carbon nanotubes by acetylene pyrolysis

Fe-substituted MCM-41 molecular sieves with ca. 1, 2, and 3 wt % Fe were synthesized hydrothermally using different sources of colloidal silica (HiSil and Cab-O-Sil) and characterized by ICP, XRD, N2 physisorption, UV-vis, EPR, TPR, and X-ray absorption. Catalysts synthesized from Cab-O-Sil showed higher structural order and stability than those from HiSil. The local environment of Fe in the mesoporous material as studied by UV-vis reveals the dominance of framework Fe in all the as-synthesized Fe-MCM-41 samples. Dislodgement of some Fe species to extraframework location occurs upon calcination, and this effect is more severe for Fe-MCM-41 (2 wt %) and Fe-MCM-41 (3 wt %), as confirmed by EPR and X-ray absorption. These materials have been used as catalytic templates for the production of carbon nanotubes (CNTs) by acetylene pyrolysis at atmospheric pressure. A relationship between the Fe loading in MCM-41 and the carbon species produced during this reaction has been established. Using our optimized conditions for this system, Fe-MCM-41 with ca. 2 wt % Fe showed the best results with particularly high selectivity for single-wall carbon nanotube (SWNT) production. This catalyst was selective for carbon nanotubes with a low amount of amorphous carbon for a narrow range of temperatures from 1073 to 1123 K. To account for the different selectivity of these catalysts for CNTs production, the local environment and chemical state of Fe in the used catalyst was further probed by X-band EPR.     

Quantification of veterinary antibiotics (sulfonamides and trimethoprim) in animal manure by liquid chromatography-mass spectrometry

A fast and cost effective method was developed to extract and quantify residues of veterinary antimicrobial agents (antibiotics) in animal manure by liquid-liquid extraction and liquid chromatography-mass spectrometry. The compounds investigated include six sulfonamides, one metabolite, and trimethoprim. The method was performed without sample clean up. Recoveries from spiked manure slurry samples (spike level = 1 mg/kg) were as follows: sulfaguanidine (52%), sulfadiazine (47%), sulfathiazole (64%), sulfamethazine (89%), its metabolite N4-acetyl-sulfamethazine (88%), sulfamethoxazole (84%), sulfadimethoxine (51%), and trimethoprim (64%). Relative standard deviations of the recoveries were less than 5% within the same day and less than 20% between days. The limit of quantification was below 0.1 mg/kg liquid manure slurry for all compounds and calibration curves obtained from extracts of spiked samples were linear up to a level of 5 mg/kg liquid manure, except for trimethoprim (0.01-0.5 mg/kg). Analysis of six grab samples taken in Switzerland from manure pits on farms where medicinal feed had been applied revealed total sulfonamide concentrations of up to 20 mg/kg liquid manure.     

Absence of renormalization group pathologies near the critical temperature. Two examples

We consider real-space renormalization group transformations for Ising-type systems which are formally defined by $$\exp \left[ { - H'(\sigma ')} \right] = \sum\limits_\sigma {T(\sigma ,\sigma ')} \exp \left[ { - H(\sigma )} \right]$$ whereT(σ, σ′) is a probability kernel, i.e., ∑_σ′ T(σ,σ′) = 1 for every configuration σ. For each choice of the block spin configuration σ′, let σ′, let μ_σ′ be the measure on spin configurations σ which is formally given by taking the probability of σ to be proportional toT(σ, σ′) exp[?H(σ)]. We give a condition which is sufficient to imply that the renormalized HamiltonianH′ is defined. Roughly speaking, the condition is that the collection of measures μ_σ′ is in the high-temperature phase uniformly in the block spin configuration σ′. The proof of this result uses methods of Olivieri and Picco. We use our theorem to prove that the first iteration of the renormalization group transformation is defined in the following two examples: decimation with spacingb = 2 on the square lattice with β < 1.36β _c and the Kadanoff transformation with parameterp on the trian gular lattice in a subset of the β,p plane that includes values of β greater than β _c .     

Near infrared electronic spectrum of TCNQ mono-valent anion

The high resolution near infrared electronic spectrum of TCNQ anion dissolved in 2-methyltetrahydrofuran glass at 77 K has been determined. The absorption bands are interpreted as simple progressions of two molecular vibrations in a single electronic excited state with ν₀₀ = 11661 cm^?1. The molecular vibrations (ω′₁ = 1264 ± 3 cm^?1, ω′₂ = 335 ± 3 cm^?1) of the vibrational progression agree well with observed Raman active transitions. The experimental data do not require the presence of two electronic transitions in the 1.3 to 2.1 eV region, contrary to what had been assumed previously on the basis of less well resolved room temperature spectra.     

Synthesis and characterization of highly ordered Ni-MCM-41 mesoporous molecular sieves

Highly ordered Ni-MCM-41 samples with nearly atomically dispersed nickel ions were prepared reproducibly and characterized. Similar to the Co-MCM-41 samples, the pore diameter and porosity can be precisely controlled by changing the synthesis surfactant chain length. Nickel was incorporated by isomorphous substitution of silicon in the MCM-41 silica framework, which makes the Ni-MCM-41 a physically stable catalyst in harsh reaction conditions such as CO disproportionation to single wall carbon nanotubes or CO2 methanation. X-ray absorption spectroscopy results indicate that the overall local environment of nickel in Ni-MCM-41 was a tetrahedral or distorted tetrahedral coordination with surrounding oxygen anions. Hydrogen TPR revealed that our Ni-MCM-41 samples have high stability against reduction; however, compared to Co-MCM-41, the Ni-MCM-41 has a lower reduction temperature, and both the H2-TPR and in situ XANES TPR reveal that the reducibility of nickel is not clearly correlated with the pore radius of curvature, as in the case of Co-MCM-41. This is probably a result of nickel being thermodynamically more easily reduced than cobalt. The stability of the structural order of Ni-MCM-41 has been investigated under SWNT synthesis and CO2 methanation reaction conditions as both require catalyst exposure to reducing environments leading to formation of metallic Ni clusters. Nitrogen physisorption and XRD results show that structural order was maintained under both SWNT synthesis and CO2 methanation reaction conditions. EXAFS results demonstrate that the nickel particle size can be controlled by different prereduction temperatures but not by the pore radius of curvature as in the case of Co-MCM-41.     

Synthesen von isomeren Methyl- und 1,1′-Dimethylferrocencarbonsäuren

Zusammenfassung Die isomeren Methyl- und 1,1-Dimethylferrocencarbonsäuren — darunter die bisher nicht beschriebene -Methylferrocencarbonsäure — sind durch neue Synthesen in präparativen Mengen zugänglich geworden. Von drei untersuchten Wegen erwies sich dieVilsmeier-Formylierung von Methyl- bzw. Dimethylferrocen, Umwandlung der Gemische isomerer Aldehyde in die Säuren und deren Auftrennung über die Ester als ergiebigste. Ferner wurde zur Darstellung der Säuren (über die Alkohole und Aldehyde) die Aminomethylierung von Methyl- und Dimethylferrocen sowie die Acylierung mit Diphenylcarbamylchlorid herangezogen.

---

By new syntheses the isomeric methyl and 1.1-dimethylferrocene carboxylic acids (including the hitherto unknown -methylferrocene carboxylic acid) are now accessible in preparative quantities. Of the routes investigated,Vilsmeier formylation of methyl and dimethylferrocene, conversion of the mixtures of isomeric aldehydes into the carboxylic acids and separation of the lattervia the esters proved to be the most satisfactory. Further synthetic methods employed were the aminomethylation, and also acylation with diphenyl carbamylchloride of methyl and dimethylferrocene, resp.

---

---

Herrn Prof. Dr. Dr. h. c.F. Wessely in Verehrung zum 70. Geburtstag gewidmet.

---

32. Mitt.:K. Schlögl, H. Falk undG. Haller, Mh. Chem.98, 82 (1967).