Effect of reaction conditions on the molecular weight and polydispersity of linear poly(arylene ether phosphine oxide)s prepared from an AB monomer

A thorough study of the polymerization behavior of 4‐fluoro‐4′‐hydroxytriphenyl‐phosphine oxide, 2 , under nucleophilic aromatic substitution reactions has been carried out. The synthesis of 2 was achieved in excellent yields by the reaction of bis(4‐fluorophenyl)phenylphosphine oxide, 1 , with one equivalent of potassium hydroxide in DMSO/water. The structure and purity of 2 were confirmed via ¹H, ¹³C, and ³¹P NMR spectroscopy along with elemental analysis. Polymerization reactions of 2 in NMP or DMSO at 180 °C provided the corresponding linear poly(arylene ether phosphine oxide)s, PAEPOs, with number average molecular weights, M_n, ranging from 11,700 to 36,500 Da. All of the polymer samples were completely soluble in chloroform, tetrahydrofuran, DMSO, NMP, and DMAc. The polymerization reactions were accompanied by a competing intramolecular process that resulted in the formation of cyclic oligomeric species that were removed via a final precipitation from methanol. Analysis using ³¹P NMR spectroscopy and size exclusion chromatography (SEC) confirmed that the majority of the lower molecular weight cyclic species were removed via this process. The polymer samples formed tough films when chloroform solutions were slowly evaporated on a glass slide. The PAEPO samples prepared in this study exhibited excellent thermal stability with T_d (5%) values between 503 and 542 in air while the glass transition temperatures ranged from 223 to 237 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2099–2106, 2006     

IN VIVO INDUCTION OF 4-THIOURIDINE-CYTIDINE ADDUCTS IN tRNA OF E. COLI B/r BY NEAR-ULTRAVIOLET RADIATION*

Abstract— Near-ultraviolet (near-UV; 320–405 nm) irradiation of Escherichia coli B/r induces the formation in vivo of ⁴Srd-Cyd adducts in transfer RNA, as evidenced by (1) fluorescence spectrum changes of tRNA extracted from irradiated cells and reduced with NaBH₄, (2) thin-layer chromatography on cellulose of hydrolysates of trichloroacetic acid-precipitable extracts of irradiated cells, and (3) comparison of these findings with adduct formation induced by near-UV irradiation of purified mixed tRNA from E. coli. The kinetics of induction of the ⁴Srd-Cyd adduct in vivo, and the near-UV fluences required, provide strong support for our earlier hypothesis that formation of these adducts is responsible for near-UV-induced growth delay in E. coli.     

Surface structuring of particle laden drops using electric fields

Emulsion drops readily adsorb particles at their surfaces, which may lead to a fluid or solid layer encapsulating the drop, known as an armored drop. In this review, we discuss how electric fields can be used to manipulate colloidal surface structures, by dielectrophoretic or electro-hydrodynamic mechanisms and we also compare this to related phenomena in lipid bilayer vesicles. The phenomena discussed are important for a wide range of uses of particle laden drops, including emulsion stabilization, Janus or patchy mesocapsule-, scaffold- or other materials-production.     

Poly(arylene ether)s with pendant diphenyl phosphoryl groups: Synthesis,characterization, and thermal properties

A series of poly(arylene ether)s, (PAEs), carrying a pendant diphenyl phosphoryl group were prepared via the nucleophilic aromatic substitution (NAS) reactions of 3,5‐difluorotriphenylphosphine oxide, 6 . The difluoro monomer 6 was synthesized via two‐step reaction sequence and subsequently characterized by ¹H, ¹³C, ¹⁹F, and ³¹P NMR spectroscopy, GC/MS, and elemental analysis. The reactivity of the electrophilic sites in 6 , activated by only a diphenylphosphoryl group located in the meta‐position, in 6 was probed via NMR spectroscopy and model reactions and was determined to be sufficient to undergo typical NAS reactions. High molecular weight, amorphous, organic soluble poly(arylene ether)s, bearing a pendant diphenylphosphoryl group, were prepared via the reaction of 6 with a variety of bis‐phenols under typical NAS conditions. The poly(arylene ether)s were characterized for structure via the use of ¹H, ¹³C, and ³¹P NMR spectroscopy while their thermal properties were evaluated using DSC and TGA analysis. The glass transition temperatures (T_g) of the synthesized PAEs ranged from 143 to 175 °C, while their 5% weight loss temperatures ranged from 467 to 510 °C under nitrogen and from 470 to 526 °C in air. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Analysis of vibrating-wire stress gage in soft rock

An analysis for the in situ elastic response of a vibrating-wire stress gage in soft rock (E<10⁵ Mpa) has been accomplished with the use of the finite-element method and approximate analytical procedures. The vibrating-wire stress gage is not a true stressmeter in that it is somewhat dependent on rock-modulus changes. Conventional procedures for calibration include the assumption that this dependency is linear with respect to rock modulus. In this analysis, a nonlinear relationship is demonstrated and an approximate mathematical expression is derived for it. Good agreement is obtained between theoretical calibration factors and test results on laboratory-scale samples with the stressmeter.     

Overview of DWDM/ODC Project

Abstract

This article introduces the main achievements resulting from the DWDM/ODC project. The five areas of research activity within the DWDM/ODC project cover some of the main issues of design and development of dense wavelength division multiplexing systems for transparent optical networks. These issues are: performance assessment with arbitrary optical filtering; performance of signaling formats; dispersion compensation strategies for directly and externally modulated systems in presence of nonlinear transmission-induced degradation; and the impact of noise and crosstalk in the extent of transparent optical networks. All five areas of research activity have contributed significantly to a better understanding of the limitations present in dense wavelength division multiplexing systems.     

Fusion around the barrier for 7Li+12C

Fusion cross-sections for the ⁷Li + ¹²C reaction have been measured at energies above the Coulomb barrier by the direct detection of evaporation residues. The heavy evaporation residues with energies below 3 MeV could not be separated out from the α-particles in the spectrum and hence their contribution was estimated using statistical model calculations. The present work indicates that suppression of fusion cross-sections due to the breakup of ⁷Li may not be significant for ⁷Li + ¹²C reaction at energies around the barrier.