真空中铝单丝电爆炸的实验研究

开展了铝单丝在负极性电流脉冲作用下电爆炸特性的研究.利用皮秒激光探针,搭建了阴影、纹影和干涉的光学诊断平台,得到了不镀膜铝丝典型的能量沉积过程,在电压崩溃时刻其沉积能量为2.4 eV/atom.为了增加金属丝内的沉积能量,开展了相同电参数及金属丝尺寸下的镀膜铝丝电爆炸实验,其沉积能量可达到5 eV/atom,实现了在电压崩溃之前铝丝完全气化(完全气化所需能量为4 eV/atom).阴影图像展示了高密度丝核区域的膨胀过程,不镀膜铝丝平均膨胀速度为2.2 km/s,而镀膜铝丝因为沉积能量大,其膨胀速度约为不镀膜铝丝的2.3倍,高密度区域膨胀速度为5 km/s.由于阴影不能反映低密度等离子体的膨胀,开展了平行双丝实验,通过测量自发光辐射,估算了低密度等离子体的膨胀速度.利用条纹相机拍摄了不镀膜铝丝电爆炸过程中自发光区域的图像.纹影图像清晰地展示了不镀膜铝丝在电爆炸过程中形成的核冕结构,而镀膜铝丝电爆炸过程中核冕结构得到了一定程度的抑制.从干涉图像计算了相移,在轴对称假设下对相移进行阿贝尔逆变换,重构了三维的铝原子数密度分布.     

基于Thomas-Fermi-Kirzhnits模型的物态方程研究

本文针对丝阵Z箍缩等高能量密度物理实验的数值模拟研究, 建立了一种适用温度、密度范围宽的三项式半经验物态方程. 三项式半经验物态方程包括零温自由能项, 电子热贡献项和离子热贡献项. 零温自由能项采用多项式拟合的方法确定. 多项式系数通过多项式计算的结果与高压缩比区域和压缩比为1时零温Thomas-Fermi-Kirzhnits模型计算的结果对应相等得到. 离子对物态方程的热贡献采用一种准谐振模型, 此谐振模型可以描述离子在固态相中的行为, 并且在高温度、低密度区域趋近于理想气体物态方程. 电子对物态方程的热贡献采用含温Thomas-Fermi-Kirzhnits模型计算. 利用所建立的三项式半经验物态方程计算了铝的等温压缩曲线, 并与实验数据做了对比. 给出了很宽温度、密度范围内铝的压强, 其数据与相应的SESAME数据库数据做了对比.     

Numerical simulation of the initial plasma formation and current transfer in single-wire electrical explosion in vacuum

In this paper, a computational model is constructed to investigate the phenomenon of the initial plasma formation and current transfer in the single-wire electrical explosion in a vacuum. The process of the single-wire electrical explosion is divided into four stages. Stage Ⅰ: the wire is in solid state. Stage Ⅱ: the melting stage. Stage Ⅲ: the wire melts completely and the initial plasma forms. Stage IV: the core and corona expand separately. The thermodynamic calculation is applied before the wire melts completely in stages Ⅰ and Ⅱ. In stage Ⅲ, a one-dimensional magnetohydrodynamics model comes into play until the instant when the voltage collapse occurs. The temperature, density, and velocity, which are derived from the magnetohydrodynamics calculation, are averaged over the distribution area. The averaged parameters are taken as the initial conditions for stage Ⅳ in which a simplified magnetohydrodynamics model is applied. A wide-range semi-empirical equation of state, which is established based on the Thomas-Fermi-Kirzhnits model, is constructed to describe the phase transition from solid state to plasma state. The initial plasma formation and the phenomenon of current transfer in the electrical explosion of aluminum wire are investigated using the computational model. Experiments of electrical explosion of aluminum wires are carried out to verify this model. Simulation results are also compared with experimental results of the electrical explosion of copper wire.     

真空及空气中金属丝电爆炸特性研究

开展了铝丝在真空和空气环境中的电爆炸特性研究.从金属丝电爆炸的电压、电流波形得到了金属丝内的沉积能量,并基于以上电参数特征分析了电爆炸产物的状态,获得了空气中铝丝电爆炸电流暂停时间随初级储能电容充电电压的变化规律.真空和空气中铝丝电爆炸在电压击穿时刻的沉积能量分别为2.8和6 eV/atom.采用波长为532 nm、亚纳秒激光探针对金属丝电爆炸物理过程开展了高时空分辨率的阴影和纹影诊断.阴影图像清晰地展示了不同气氛环境中高密度电爆炸产物的膨胀过程,根据光学诊断图像分析了高密度丝核沉积能量的结构和空气中铝丝电爆炸产生的激波的膨胀轨迹.真空和空气环境中高密度电爆炸产物的平均膨胀速度分别为1.9和3 km/s.基于实验数据和输运参数模型,估算了金属丝在电压击穿时刻的温度.