ADV measurements of velocity distributions in a gravel‐bed flume

Velocity measurements carried out by an acoustic doppler velocimeter (ADV) in a rectangular laboratory ?ume having a gravel bed are presented. The velocity pro?les are measured in six verticals of the channel cross‐section having an increasing distance (from 4 to 38·5 cm) from the ?ume wall. The experimental runs are carried out for ?ve different bed arrangements, characterized by different concentrations of coarser elements, and for the two conditions of small‐ and large‐scale roughness. For both hydraulic conditions, the velocity measurements are ?rst used to test the applicability of the Dean pro?le and of the logarithmic pro?le corrected by a divergence function proposed in this paper. Then, for each value of the depth sediment ratio h/d₈₄, the non‐dimensional friction factor parameter is calculated by integration of the measured velocity distributions in the different verticals of the cross‐section. Finally a semi‐logarithmic ?ow resistance equation is empirically deduced. Copyright © 2003 John Wiley & Sons, Ltd.     

The Ferrara hard X-ray facility for testing/calibrating hard X-ray focusing telescopes

We will report on the current configuration of the X-ray facility of the University of Ferrara recently used to perform reflectivity tests of mosaic crystals and to calibrate the experiment JEM–X aboard Integral. The facility is now located in the technological campus of the University of Ferrara in a new building (named LARIX laboratory= ̳LARge ̳Italian ̳X-ray facility) that includes a tunnel 100 m long with, on the sides, two large experimental rooms. The facility is being improved for determining the optical axis of mosaic crystals in Laue configuration, for calibrating Laue lenses and hard X-ray mirror prototypes.     

The humin structure of mucilage aggregates in the Adriatic and Tyrrhenian seas: hypothesis about the reasonable causes of mucilage formation

Sixteen mucilages sampled in the Adriatic and Tyrrhenian seas during 1999–2001 were characterised using spectroscopic [Fourier transform infrared spectroscopy (FTIR); colorimetric], chromatographic [thin-layer chromatography (TLC)], and elemental analysis techniques. Most samples contained comparable fractions of organic and inorganic compounds, with the exception of a few samples where the inorganic fraction was greater than the organic fraction. Carbohydrates were important in the samples rich in organic matter, while carbonate and silica (quartz and biogenic silica) were the most important constituents of the inorganic fraction. Carbonate and silica were the only important constituents of the samples with a very low organic content.According to chemical analyses, mucilage aggregates show the typical structure of humin—the insoluble fraction of the humic substance. Classification of mucilage samples as humin-like compounds, together with a reexamination of the factors involved in the formation of organic aggregates in marine environment, has led to the formulation of a reasonable hypothesis for mucilage formation.     

Optical and X-Ray Observations of the Symbiotic System Ag Draconis During Quiescence and Outburst

We review the main characteristics of the symbiotic system AG Draconis, with special emphasis on its optical and X-ray variations. We also discuss the X-ray to visual energy distribution during quiescence and outburst and describe our spectroscopic and X-ray observations during the 2003 outburst. Based on X-ray observations collected with the XMM–Newton Observatory, on INES data from the IUE satellite, and on optical spectra collected with the Asiago–Cima Ekar, Bologna–Loiano and La Palma–Galileo Italian telescopes.     

Roughness effect on the correction factor of surface velocity for rill flows

Flow velocity is one of the most important hydrodynamic variables for both channelized (rill and gullies) and interrill erosive phenomena. The dye tracer technique to measure surface flow velocity V_s is based on the measurement of the travel time of a tracer needed to cover a known distance. The measured V_s must be corrected to obtain the mean flow velocity V using a factor α_v = V/V_s which is generally empirically deduced. The V_s measurement can be influenced by the method applied to time the travel of the dye-tracer and α_v can vary in different flow conditions. Experiments were performed by a fixed bed small flume simulating a rill channel for two roughness conditions (sieved soil, gravel). The comparison between a chronometer-based (CB) and video-based (VB) technique to measure V_s was carried out. For each slope-discharge combination, 20 measurements of V_s, characterized by a sample mean V_m, were carried out. For both techniques, the frequency distributions of V_s/V_m resulted independent of slope and discharge. For a given technique, all measurements resulted normally distributed, with a mean equal to one, and featured by a low variability. Therefore, V_m was considered representative of surface flow velocity. Regardless of roughness, the V_m values obtained by the two techniques were very close and characterized by a good measurement precision. The developed analysis on α_v highlighted that it is not correlated with Reynolds number for turbulent flow regime. Moreover, α_v is correlated neither with the Froude number nor with channel slope. However, the analysis of the empirical frequency distributions of the correction factor demonstrated a slope effect. For each technique (CB, VB)-roughness (soil, gravel) combination, a constant correction factor was statistically representative even if resulted in less accurate V estimations compared to those yielded by the slope-specific correction factor.     

Effects of tilling methods on soil penetration resistance,organic carbon and water stable aggregates in a vineyard of semiarid Mediterranean environment

Tillage, especially in semiarid Mediterranean environment, enhances the mineralization process of soil organic matter (SOM) and, in turn, decreases aggregate stability. Furthermore, continuous tillage leads to the formation of plough pan beneath the tilled layer. In the present study, we investigated the effect of an innovative self-propelled machine (spading machine, SM) for shallow tillage on SOM, water stable aggregates (WSA) and soil penetration resistance (PR). Such effects were compared to those of chisel plough (CP), rotary tiller (RT) and no tillage (NT). Each tilling method was applied up to a depth of 15 cm, whereas in NT only a brush cutter was used for weed control. Soil analyses were performed at the start of the experiment (March 2009, T0), in April 2010 (T1), May 2012 (T3), and June 2014 (T5) at both 0–15 and 15–30 cm. Compared to T0, soil PR increased with time in all the treatments and generally followed the order SM?<?RT?<?CP?<?NT. In soil tilled with the SM, soil PR never exceeded 2.5 MPa that was demonstrated to be a critical value for root elongation, and no evidence of the formation of plough pan beneath the tilled layer was observed. SOC as well as water content and WSA were higher in SM compared with CP and RT. In conclusion, the spading machine was proved to be more efficient in lowering the soil PR and in avoiding the formation of the plough pan. Furthermore, SM increased SOC and WSA.     

Evaluating overland flow sediment transport capacity

An equation for evaluating the sediment transport capacity of overland flow is a necessary part of a physically based soil erosion model describing sediment detachment and transport as distributed processes. At first, for the hydraulic conditions of small-scale and large-scale roughness, the sediment transport capacity relationship used in the WEPP model is calibrated by Yalin and Govers' equation. The analysis shows that the transport coefficient K_t depends on the Shields parameter, Y, according to a semi-logarithmic (Yalin) or a linear (Govers) equation. The reliability of the semi-logarithmic equation is verified by Smart's, and Aziz and Scott's experimental data. Then the Low's formula, whose applicability is also proved by Smart's, and Aziz and Scott's data, is transformed as a stream power equation in which a stream power coefficient, K_SP, depending on Shields parameter, slope, sediment and water-specific weight, appears. A relationship between transport capacity and effective stream power is also proposed. Finally, the influence of rainfall on sediment transport capacity and the prediction of critical shear stress corresponding to overland flow are examined. © 1998 John Wiley & Sons, Ltd.     

Stable isotopes of pedogenic carbonates from the Somma–Vesuvius area,southern Italy,over the past 18 kyr: palaeoclimatic implications

Stable isotopes were measured in the carbonate and organic matter of palaeosols in the Somma–Vesuvius area, southern Italy in order to test whether they are suitable proxy records for climatic and ecological changes in this area during the past 18000 yr. The ages of the soils span from ca. 18 to ca. 3 kyr BP. Surprisingly, the Last Glacial to Holocene climate transition was not accompanied by significant change in δ¹⁸O of pedogenic carbonate. This could be explained by changes in evaporation rate and in isotope fractionation between water and precipitated carbonate with temperature, which counterbalanced the expected change in isotope composition of meteoric water. Because of the rise in temperature and humidity and the progressive increase in tree cover during the Holocene, the Holocene soil carbonates closely reflect the isotopic composition of meteoric water. A cooling of about 2°C after the Avellino eruption (3.8 ka) accounts for a sudden decrease of about 1‰ in δ¹⁸O of pedogenic carbonate recorded after this eruption. The δ¹³C values of organic matter and pedogenic carbonate covary, indicating an effective isotope equilibrium between the organic matter, as the source of CO₂, and the pedogenic carbonate. Carbon isotopes suggest prevailing C₃ vegetation and negligible mixing with volcanogenic or atmospheric CO₂. Copyright © 2000 John Wiley & Sons, Ltd.     

Geotechnical characterisation of pyroclastic soils involved in huge flowslides

Landslides of the flow type involving granular geo-materials frequently result in casualties and damage to property because of the long travel distance and the high velocities that these may attain. This was true for the events that took place in Campania Region (Southern Italy) in May 1998, involving pyroclastic soils originating from explosive activities of the Somma-Vesuvius volcano. Although these phenomena have frequently affected various areas of the Campania region over the last few centuries, there were no useful geological and geotechnical references available in the aftermath of the May 1998 events. For this reason Salerno University, which was involved in the scientific management of the emergency, addressed the issue of acquiring data on the geological, geomorphological and hydrogeological features of the slopes where the landslides had taken place. The information acquired made it possible to set up a slope evolution model that is able to interpret, from a geological point of view, past and more recent landslides that had occurred in the same area. As preliminary geotechnical analyses had already validated the above model, more detailed investigations were performed both on the pore pressure regimen of the covers still in place as well as on the physical and mechanical properties of pyroclastic soils, in saturated and unsaturated conditions. The present paper begins by discussing the data acquired during the .rst phase of the studies and then goes on to illustrate the laboratory results so far obtained with the aid of approximate procedures. These help advance our knowledge of pyroclastic soils within a reasonable time frame, thus improving landslide triggering analysis.