The birth of sedimentology: Henry Clifton Sorby and Johannes Walther

Sedimentology is the study of naturally occurring particulate matter with special emphasis on understanding the factors controlling the creation, distribution and accumulation of that matter. Consequently, sedimentology can, and does, embrace geomorphology and climatology, transport mechanisms, depositional environments and lithifaction processes. Its significance lies in the ability of practitioners of the subject—sedimentologists—to determine each and all of the foregoing through the study of samples of sediments and sedimentary rocks. It is, therefore, a basic discipline for the study of past and present environments on Earth, its satellite and its planetary neighbours. The long-standing contributions of two of the nineteenth century founders of the subject, Henry Clifton Sorby (1826–1908) and Johannes Walther (1860–1937), are discussed here.     

Methodology for preliminary assessment of Natech risk in urban areas

Concern for natural hazard-triggered technological disasters (Natech disasters) in densely populated and industrialized areas is growing. Residents living in urban areas subject to high natural hazard risk are often unaware of the potential for secondary disasters such as hazardous materials releases from neighboring industrial facilities, chemical storage warehouses or other establishments housing hazardous materials. Lessons from previous disasters, such as the Natech disaster during the Kocaeli earthquake in Turkey in 1999 call for the need to manage low frequency/high consequence events, particularly in today’s densely populated areas. However, there is little guidance available on how local governments and communities can assess Natech risk. To add to the problem, local governments often do not have the human or economic resources or expertise to carry out detailed risk assessments. In this article, we propose a methodology for preliminary assessment of Natech risk in urban areas. The proposed methodology is intended for use by local government officials in consultation with the public. The methodology considers possible interactions between the various systems in the urban environment: the physical infrastructure (e.g., industrial plants, lifeline systems, critical facilities), the community (e.g., population exposed), the natural environment (e.g., delicate ecosystems, river basins), and the risk and emergency management systems (e.g., structural and nonstructural measures). Factors related to vulnerability and hazard are analyzed and qualitative measures are recommended. Data from hazardous materials releases during the Kocaeli, Turkey earthquake of August 17, 1999 are used as a case study to demonstrate the applicability of the methodology. Limitations of the proposed methodology are discussed as well as future research needs.

Damage Evaluation of Agro-meteorological Hazards in the Maize-Growing Region of Songliao Plain,China: Case Study of Lishu County of Jilin Province

Agro-meteorological hazards such as drought, waterlogging and cool summer occur with very high frequency and affect maize production and social-economic development in the maize-growing region of Songliao Plain, China. Moreover, both the frequency of these hazards and loss from them are considered to be increasing with global warming. The purpose of this paper is to quantitatively analyze the relationships between the fluctuation of maize yield and drought, waterlogging and cool summer, and to evaluate the consequences of these hazards in the maize-growing area of Songliao Plain, taking Lishu county as a case study area based on GIS (Geographic Information System). Crop yield-climate analysis and regression analysis were employed to analyze and quantify relationships between the fluctuation of maize yield and drought, waterlogging and cool summer, and to evaluate the consequences of these hazards. The parameters and model of damage evaluation were presented using weighted comprehensive analysis, and the degree of damage of drought, waterlogging and cool summer to maize production was comprehensively evaluated and regionalized. It is shown that from 1949 to 1990, the negative value years of the fluctuation of maize yield due to meteorological hazards accounted for 55% of seasons, of which 14% was caused by drought, 30% by waterlogging, 4% by cool summer and drought, 9% by cool summer and waterlogging, 13% by drought and waterlogging, 30% by drought, waterlogging and cool summer. Studies on the instability and spatial variation of the fluctuations in maize yield in Lishu county showed that the middle plains are stable areas to climatic influence, while southeastern hills and low mountains, the low lands of the plains along the East Liao River and the western plain are unstable areas in terms of areas in maize yield. The synthetic index of the degree of damage to maize of drought, waterlogging and cool summer showed a strong positive correlation with the ratio of the amount damaged to the normal yield of maize. This suggests that this index can be used to evaluate such damage. The degree of damage of drought, waterlogging and cool summer to maize in Lishu county shows the regional characteristics, which increase gradually from the center to the west and east, this being almost identical with the spatial distribution of the fluctuation of maize yield due to these hazards. This study can be expected to provide the basis for developing strategies to mitigate agro-meteorological hazards and reducing the losses from them, and adjust the medium and long-term distribution of agricultural activities so as to adapt to environmental changes.     

北京地区春末-秋初气溶胶理化特性的观测研究

分析了1997年5～9月和1998年4～9月北京整层大气气溶胶光学厚度、近地面气溶胶粒子数浓度的日变化、季节变化及其与气象要素的关系,还分析了 1997年5月16日、7月21日和8月2日收集的北京单个气溶胶粒子样品的形态、大小和化学元素组成.结果显示,北京地区春末-秋初整层大气气溶胶光学厚度在0.1～1.6之间变化;气溶胶数浓度(D>0.3μm)为几～几百个/cm3;整层大气气溶胶光学厚度的日变化型式与近地面气溶胶数浓度呈现相反的走向;气溶胶光学厚度和数浓度的日、季节变化显示了整层大气和近地面大气气溶胶与该地区气象、气候条件的关系.气溶胶数浓度与大气相对湿度呈正相关,与风向的关系是偏东风数浓度大,西、西南风数浓度小.电子显微镜分析的结果表明:颗粒物的形态以不规则形、丸形、液态滴形和方形为主;颗粒物化学元素组成有Si、K、S、Al、Mg、Ca、Fe等元素;人类活动排放的Zn、P、Ti、pb、Ba等元素也探测到;北京近地面粒子的一个显著特点是富含Ca和K元素,它们可能分别来自建筑粉尘和有机物的燃烧;给出了一个典型的碳黑粒子和一个粒子经过凝结过程的"卫星"滴环绕的矿物粒子的照片和元素谱图.     

A Polyethylene Chamber for Use in Physical Modelling of the Heat Exchange on Surfaces Exposed to a Radiation Regime

Bodies located in outdoor environments are radiatively heated in the daytime and cooled at night. Convective heat transfer is subsequently activated between the body surface and the surrounding air. To investigate these heat-exchange processes, we developed a new apparatus, referred to as a “polyethylene chamber”, for use in physical model experiments. The chamber is a 1.51-m-long tube with the ends serving as the air inlet and outlet, and is ventilated in the longitudinal direction by using an exhaust fan. The measurement section of the chamber is open but otherwise the device is covered with 0.02-mm-thick polyethylene film. Because such thin polyethylene film transmits approximately 85 % of both shortwave and longwave radiation, the model surface in the chamber is exposed to a radiation level almost equivalent to the outdoor radiation level. For example, at night the surface of the model is cooled by radiation, and subsequently, the air inside the chamber is cooled by the surface. Consequently, the outlet air temperature becomes lower than the inlet air temperature. The use of this temperature difference between the air inlet and outlet, together with other heat balance components, is a unique approach to the chamber technique for evaluating the heat exchange rate at a model’s surface. This report describes the design and heat balance of the chamber, and compares the heat-balance-based approach with another approach based on the radiation–convection balance on the model surface. To demonstrate the performance of the polyethylene chamber, two chambers were exposed to outdoor radiation on a clear night; one contained a leaf model. Air and surface temperatures were measured and the convective heat flux at the surfaces of the model and floor surface were calculated from the heat balance components of the chambers by assuming steady-state heat transfer. The fluxes agreed closely with those obtained from the radiation–convection balance at the model or floor surface. The results also clearly showed that the air flowing in the polyethylene chamber was cooled more efficiently when the model surface was installed in the chamber, even though the model surface temperature was high.     

Effects of ulvoid (Ulva spp.) accumulation on the structure and function of eelgrass (Zostera marina L.) bed

The objective of this study is to clarify the effect of ulvoid (Ulva spp.) accumulation on the structure and function of an eelgrass bed by the coast of Iwakuni, Seto Inland Sea, Japan. We monitored eelgrass shoot density and volume of ulvoid accumulation in the study site and evaluated effects of the accumulated ulvoid canopy on the percent survival, seedling density, growth rates, photosynthetic photon flux density (PPFD) and carbon contents of eelgrass. Eelgrass shoot density decreased by the accumulation of ulvoid. Also, seedling density decreased by the increase in the ulvoid volumes. Shoot density, seedling density and leaf elongation were negatively correlated with ulvoid volume. Carbon contents in eelgrass decreased by the accumulation of ulvoid (canopy height: 25cm). These results suggest that accumulation of ulvoid bloom has significant negative impacts on the structure and function of eelgrass bed, i.e. decreases in vegetative shoot density, seedling density, shoot height and growth rate.     

Seismological significance of the 1977–1978 eruptions and the magma intrusion process of usu volcano, Hokkaido

An earthquake swarm, and the major pumice eruptions in August 1977 which followed, marked the start of the dacitic doming activity of Usu volcano in southwestern Hokkaido, Japan. The sequence of magma intrusion processes was investigated in detail by means of seismological and other geophysical data. The distribution of the abundant hypocenters shows clearly an earthquake-free zone beneath the summit crater. The hypocenters migrated in a manner consistent with the development of the observed asymmetrical surface deformations, considered due to magma intrusion into this earthquake-free zone. The earthquake mechanism solutions are mostly of dip-slip type and are interpreted in terms of the doming deformations. The existence of earthquake families (earthquakes with similar waveforms) is the main cause of the peculiar occurrence of earthquakes in space, time and magnitude. The concept of scattered barriers of different sizes and strengths can explain well the distinct characteristics of the occurrence of the swarm, and the observed episodic deformations.     

Diffuse Emission of CO2 from Showa-Shinzan, Hokkaido, Japan: A Sign of Volcanic Dome Degassing

Two soil CO₂ efflux surveys were carried out in September 1999 and June 2002 to study the spatial distribution of diffuse CO₂ degassing and estimate the total CO₂ output from Showa-Shinzan volcanic dome, Japan. Seventy-six and 81 measurements of CO₂ efflux were performed in 1999 and 2002, respectively, covering most of Showa-Shinzan volcano. Soil CO₂ efflux data showed a wide range of values up to 552 g m^-2 d^-1. Carbon isotope signatures of the soil CO₂ ranged from -0.9‰ to -30.9‰, suggesting a mixing between different carbon reservoirs. Most of the study area showed CO₂ efflux background values during the 1999 and 2002 surveys (B = 8.2 and 4.4 g m^-2 d^-1, respectively). The spatial distribution of CO₂ efflux anomalies for both surveys showed a good correlation with the soil temperature, indicating a similar origin for the extensive soil degassing generated by condensation processes and fluids discharged by the fumarolic system of Showa-Shinzan. The total diffuse CO₂ output of Showa-Shinzan was estimated to be about 14.0–15.6 t d^-1 of CO₂ for an area of 0.53 km².