Conversions between ordered and disordered cellulose. Effects of mechanical treatment followed by cyclic wetting and drying

An investigation into the effects of mechanical treatment and hydration on the order of cellulose substrates (microcrystalline cellulose and Cladophora cellulose) was performed by the use of ball milling followed by cyclic wetting and drying. The results, monitored by¹³C-CP/MAS NMR-spectroscopy, were evaluated by calculation of the crystallinity indices and principal component analysis of the NMR data acquired. The results showed that a large part of the disorder induced by the mechanical treatment of cellulose by ball milling is reversible and reordering upon hydration leads to the cellulose I form initially present. The C4 signals corresponding to the reversibly disordered cellulose chains are observed in the amorphous region between 79 and 86 ppm in the¹³C-CP/MAS NMR-spectra together with signals from cellulose chains on the surface of ordered regions. The peak cluster which contains the C2, C3 and C5 ring carbons can be divided into two specific spectral regions; one between 74 and 77 ppm largely originates from ring carbons within disordered cellulose structures, and one between 70 and 74 ppm contains larger contributions from ordered cellulose. The behaviour of the celluloses upon milling is in accordance with a concept of ordered cellulose fibrils containing amorphous cellulose mainly as surface layers and induced reversible lattice distortions.     

A theoretical study of configurational inversion of 1,1′-binaphthyl by molecular mechanics

The molecular mechanics method has been applied to the study of various pathways and transition states for the configurational inversion of 1,1′-binaphthyl. The preferred pathway is found to be one on the anti (“trans”) side involving one point of H?H nonbonded contact in each of two identical transition states, separated by a very shallow minimum. Very satisfactory agreement with available experimental values for the enthalpy of activation is achieved.     

A non-empirical study of hydrogen bonding in the dimer of formamide

A non-empirical SCF calculation on the cyclic dimer of formamide in two different GTF basis sets has been performed and is compared to a similar calculation for the isolated monomer. The energy gain per H-bond is reasonable. Both the proton-donor and proton-acceptor show a global gain in electrons at the expense of the hydrogen of the bridge and of the C atoms. This gross changes in charge are reflected in the _1s values. They cover a gain for nitrogen and a loss for oxygen which are studied in detail on the difference density maps in the molecular plane. The covalent character of the H bond appears very small. Both basis sets yield similar conclusions.

---

Zusammenfassung Eine SCF-Rechnung mit nicht empirischen Parametern wurde mit zwei verschiedenen aus Gauß aufgebauten Basissätzen für das zyklische Dimere und das Monomere des Formamid durchgeführt. Der Energiegewinn ist beträchtlich. Sowohl der Protonendonor als auch der -acceptor zeigen insgesamt einen Elektronengewinn auf Kosten des Brückenwasserstoffs und des Kohlenstoffatoms. Diese Änderung zeigt sich auch in den _1s -Werten. Der Gewinn und Verlust an -Elektronen für Stickstoff bzw. Sauerstoff wird an Hand von Elektronendichtekonturen untersucht. Der kovalente Charakter der Wasserstoffbrückenbindung ist sehr klein. Die beiden Basissätze führen zu ähnlichen Ergebnissen.

---

Résumé Un calcul SCF non-empirique du dimère cyclique de la formamide a été fait dans deux bases de fonctions gaussiennes différentes et comparaison est faite avec le monomère isolé. Le gain d'énergie par liaison H est d'un ordre de grandeur raisonnable. Le donneur et l'accepteur de proton gagnent au total des électrons alors que l'hydrogène de la liaison H en perd ainsi que le carbone central; ces déplacements globaux se reflètent dans les valeurs des _1s correspondants. Ils couvrent un gain pour l'azote et une perte pour l'oxygène qui sont étudiés en détails sur les courbes d'isodensité différentielle dans le plan moléculaire. La liaison H apparait peu ou pas covalente. Les deux bases de gaussiennes choisies donnent les mêmes conclusions qualitatives.

---

---

This work was supported by grant n CR 66-236 of the Institut National de la Santé et de la Recherche Médicale (Comité Cancer et Leucémie).     

Investigation of the metal binding site in methionine aminopeptidase by density functional theory

All methionine aminopeptidases exhibit the same conserved metal binding site. The structure of this site with either Co²⁺ions or Zn²⁺ions was investigated using density functional theory. The calculations showed that the structure of the site was not influenced by the identity of the metal ions. This was the case for both of the systems studied; one based on the X-ray structure of the human methionine aminopeptidase type 2 (hMetAP-2) and the other based on the X-ray structure of the E. colimethionine aminopeptidase type 1 (eMetAP-1). Another important structural issue is the identity of the bridging oxygen, which is part of either a water molecule or a hydroxide ion. Within the site of hMetAP-2 the results strongly indicate that a hydroxide ion bridges the metal ions. By contrast, the nature of the oxygen bridging the metal ions within the metal binding site of eMetAP-1 cannot be determined based on the results here, due to the similar structural results obtained with a bridging water molecule and a bridging hydroxide ion.     

Particle zips: vertical emulsion films with particle monolayers at their surfaces

Vertical emulsion films with particle monolayers at their surfaces have been studied by direct microscope observations. The effects of particle wettability and surface coverage on the structure and stability of water films in octane and octane films in water have been investigated. Monodisperse silica particles (3 microm in diameter) hydrophobized to different extents have been used. It is found that the structure and stability of emulsion films strongly depend on the film type (water-in-oil or oil-in-water), the particle contact angle, the interactions between particles from the same and the opposite monolayer, and the monolayer density. Stable films are observed only when the particle wettability fulfills the condition for stable particle bridges--in agreement with the concept that hydrophilic particles can give stable oil-in-water emulsions, whereas hydrophobic ones give water-in-oil emulsions. In the case of water films with dilute disordered monolayers at their surfaces, the hydrophilic particles are expelled from the film center toward its periphery, giving a dimple surrounded by a ring of particles bridging the film surfaces. In contrast, the thinning of octane films with dilute ordered monolayers at their surfaces finally leads to the spontaneous formation of a dense crystalline monolayer of hydrophobic particles bridging both surfaces at the center of the film. The behaviors of water and octane films with dense close-packed particle monolayers at their surfaces are very similar. In both cases, a transition from bilayer to bridging monolayer is observed at rather low capillary pressures. The implications of the above finding for particle stabilized emulsions are discussed.     

A stereochemical anomaly: the cyclised (R)-AMPA analogue (R)-3-hydroxy-4,5,6,7-tetrahydroisoxazolo[5,4-c]pyridine-5-carboxylic acid [(R)-5-HPCA] resembles (S)-AMPA at glutamate receptors

(RS)-3-Hydroxy-4,5,6,7-tetrahydroisoxazolo[5,4-c]pyridine-5-carboxylic acid (5-HPCA)(), which is a conformationally constrained cyclised analogue of AMPA has previously been described as causing glutamate receptor mediated excitations of spontaneously firing cat spinal interneurons in a similar fashion to AMPA. We have now prepared the enantiomers of through chiral chromatographic resolution of (RS)-3-(carboxymethoxy)-4,5,6,7-tetrahydroisoxazolo[5,4-c]pyridine-5-carboxylic acid () followed by a stereoconservative hydrolysis resulting in the enantiomers of with high enantiomeric excess (% ee [greater-than-or-equal] 99). The absolute configurations indicated by an X-ray analysis of (-)- monohydrate were confirmed by comparing observed and ab initio calculated electronic circular dichroism spectra and by stereoconservative synthesis of (S)- from (S)-AMPA, the pharmacologically active form of AMPA. The pharmacological effects at native and cloned (GluR1-4) AMPA receptors were shown to reside exclusively with (R)-(+)-, in striking contrast to the usual stereoselectivity trend among AMPA receptor agonists. The reasons for this anomalous behaviour became clear upon docking both enantiomers of to the agonist binding site of GluR2.     

Ordered and disordered patterns in two-phase flows in microchannels

We show that wetting properties crucially control the patterns in two-phase flows of immiscible fluids in microchannels. Ordered patterns, continuously entrained by the flow, are obtained when one phase completely wets the walls, while disordered patterns, intermittently adhering to the channel walls, are unavoidably produced when wetting is partial. A lower limit for the channel sizes capable of generating well structured objects (drops, pears, pearl necklaces, ...) is presented.     

Mercerized cellulose biocomposites: a study of influence of mercerization on cellulose supramolecular structure, water retention value and tensile properties

In this study the effect of the mercerization degree on the water retention value (WRV) and tensile properties of compression molded sulphite dissolving pulp was evaluated. The pulp was treated with 9, 10, or 11 % aqueous NaOH solution for 1 h before compression molding. To study the time dependence of mercerization the pulp was treated with 12 wt% aqueous NaOH for 1, 6 or 48 h. The cellulose I and II contents of the biocomposites were determined by solid state cross polarization/magic angle spinning carbon 13 nuclear magnetic resonance (CP/MAS ¹³C NMR) spectroscopy. By spectral fitting of the C6 and C1 region the cellulose I and II content, respectively, could be determined. Mercerization decreased the total crystallinity (sum of cellulose I and cellulose II content) and it was not possible to convert all cellulose I to cellulose II in the NaOH range investigated. Neither increased the conversion significantly with 12 wt% NaOH at longer treatment times. The slowdown of the cellulose I conversion was suggested as being the result from the formation of cellulose II as a consequence of coalescence of anti-parallel surfaces of neighboring fibrils (Blackwell et al. in Tappi 61:71–72, 1978; Revol and Goring in J Appl Polym Sci 26:1275–1282, 1981; Okano and Sarko in J Appl Polym Sci 30:325–332, 1985). Compression molding of the partially mercerized dissolving pulps yielded biocomposites with tensile properties that could be correlated to the decrease in cellulose I content in the pulps. Mercerization introduces cellulose II and disordered cellulose and lowered the total crystallinity reflected as higher water sensitivity (higher WRV values) and poorer stiffness of the mercerized biocomposites.     

Pyrolysis of aminonitriles,cyanohydrazones, and cyanoacetamides. Part I. Elimination reaction of 1-arylmethyleneamino-1,2-dihydro-4,6-dimethyl-2-oxopyridine-3-carbonitriles and substituted benzaldehyde cyanoacetylhydrazones

Pyrolysis of the Schiff bases of 1-arylmethyleneamino-1,2-dihydro-4,6-dimethyl-2-oxopyridine-3-carbonitriles (1–5) has been studied. These compounds eliminate via a six-membered transition state to produce substituted benzonitriles and 2-hydroxy-4,6-dimethylpyridine-3-carbonitrile. These eliminations are unimolecular first-order reactions. The kinetic data gave a good correlation with σ⁰ values of the substituents on the aryl group with ρ = 0.83 at 520 K. Utilization of the pyrolytic reaction in synthesis of various benzonitriles is considered, and mechanistic information has been obtained by comparing the kinetic data and product analysis of the Schiff bases with their open-chain substituted benzaldehyde cyanoacetylhydrazones (6–9) analogues. © 1996 John Wiley & Sons, Inc.     

Threshold effects on renormalization group running of neutrino parameters in the low-scale seesaw model

We show that, in the low-scale type-I seesaw model, renormalization group running of neutrino parameters may lead to significant modifications of the leptonic mixing angles in view of so-called seesaw threshold effects. Especially, we derive analytical formulas for radiative corrections to neutrino parameters in crossing the different seesaw thresholds, and show that there may exist enhancement factors efficiently boosting the renormalization group running of the leptonic mixing angles. We find that, as a result of the seesaw threshold corrections to the leptonic mixing angles, various flavor symmetric mixing patterns (e.g., bi-maximal and tri-bimaximal mixing patterns) can be easily accommodated at relatively low energy scales, which is well within the reach of running and forthcoming experiments (e.g., the LHC).