Nickel nitrosyl complexes with the diphenylphosphinoethane ligand

Summary Four-coordinate nickel nitrosyl complexes of the general formula Ni(NO)X(Dppe) (Dppe=Ph₂PCH₂CH₂PPh₂) have been prepared byin situ formation of Ni(NO₂)X(Dppe), (X= Cl, Br, I or SCN) followed by reduction with triphenylphosphine, or carbon monoxide, and/or DMF. Oxygenation of the nitrosyl complexes gives the corresponding nitro products and as indicated by u.v.-vis spectroscopy involves formation of an intermediate. The oxygenation rate increases markedly in the presence of light or of a catalytic amount of benzoyl peroxide and a tentative explanation is offered for these observations. Ionic adducts are formed in reactions between the nitrosyl complexes and donor molecules.Paper presented in part at the XXth ICCC Conference.     

Translucent nanolatexes through emulsion polymerisation of ethyl acrylate

Turbid emulsion systems of ethylacrylate/sodium dodecyl sulphate/water with monomer to surfactant (M/S) ratios 10 and 40 were transformed into stable transparent/translucent nanolatexes through emulsion polymerisation using potassium persulphate as an initiator. The latex particle size was observed to be similar to that obtained by true microemulsion polymerisation where M/S ratio is one. The kinetic plots exhibited two intervals upto M/S ratios 10. AIBN initiated systems showed separation of two phases for the M/S ratio ?10. M/S ratios were varied from 1 to 54 for the comparative study of polymerisation in emulsion and microemulsion media. Gel effect dominance was observed around 40-60% conversion for the microemulsion polymerisation of ethylacrylate. Only one chain per particle was observed for microemulsion system with M/S ratio 1 and three to four chains per particle were observed for the systems with M/S ratios 10 and 40. Unlike M/S=1 system, higher dependency of polymerisation rate on initiator concentration was observed for the systems with M/S=10 and 40. A possible mechanism for such a transformation has been proposed.     

On [Fe4S4]2+ -(mu2-SR)-M II bridge formation in the synthesis of an A-cluster analogue of carbon monoxide dehydrogenase/acetylcoenzyme A synthase

The construction of a synthetic analogue of the A-cluster of carbon monoxide dehydrogenase/acetylcoenzyme synthase, the site of acetylcoenzyme A formation, requires as a final step the formation of an unsupported [Fe(4)S(4)]-(mu(2)-SR)-Ni(II) bridge to a preformed cluster. Our previous results (Rao, P. V.; Bhaduri, S.; Jiang, J.; Holm, R. H. Inorg. Chem. 2004, 43, 5833) and the work of others have addressed synthesis of dinuclear complexes relevant to the A-cluster. This investigation concentrates on reactions pertinent to bridge formation by examining systems containing dinuclear and mononuclear Ni(II) complexes and the 3:1 site-differentiated clusters [Fe(4)S(4)(LS(3))L'](2-) (L' = TfO(-) (14), SEt (15)). The system 14/[{Ni(L(O)-S(2)N(2))}M(SCH(2)CH(2)PPh(2))](+) results in cleavage of the dinuclear complex and formation of [{Ni(L(O)-S(2)N(2))}Fe(4)S(4)(LS(3))]- (18), in which the Ni(II) complex binds at the unique cluster site with formation of a Ni(mu(2)-SR)(2)Fe bridge rhomb. Cluster 18 and the related species [{Ni(phma)}Fe(4)S(4)(LS(3))](3)- (19) are obtainable by direct reaction of the corresponding cis-planar Ni(II)-S(2)N(2) complexes with 14. The mononuclear complexes [M(pdmt)(SEt)]- (M = Ni(II), Pd(II)) with 14 in acetonitrile or Me(2)SO solution react by thiolate transfer to give 15 and [M(2)(pdmt)(2)]. However, in dichloromethane the Ni(II) reaction product is interpreted as [{Ni(pdmt)(mu(2)-SEt)}Fe(4)S(4)(LS(3))](2-) (20). Reaction of Et(3)NH(+) and 15 affords the double cubane [{Fe(4)S(4)(LS(3))}(2)(mu(2)-SEt)](3-) (21). Cluster 18 contains two mutually supportive Fe-(mu(2)-SR)-Ni(II) bridges, 19 exhibits one strong and one weaker bridge, 20 has one unsupported bridge (inferred from the (1)H NMR spectrum), and 21 has one unsupported Fe-(mu(2)-SR)-Fe bridge. Bridges in 18, 19, and 21 were established by X-ray structures. This work demonstrates that a bridge of the type found in the enzyme A-clusters is achievable by synthesis and implies that more stable, unsupported single thiolate bridges may require reinforcement by an additional covalent linkage between the Fe(4)S(4) and nickel-containing components. (LS(3) = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-); L(O)-S(2)N(2) = N,N'-diethyl-3,7-diazanonane-1,9-dithiolate(2-); pdmt = pyridine-2,6-methanedithiolate(2-); phma = N,N'-1,2-phenylenebis(2-acetylthio)acetamidate(4-); TfO = triflate.).     

Microwave assisted highly efficient one-pot multi-component synthesis of novel 2-(tetrasubstituted-1H-pyrrol-3-yl)-4H-chroman-4-ones catalyzed by heterogeneous reusable silica gel supported polyphosphoric acid (PPA/SiO2)

A solvent-free, eco-friendly and facile approach for the synthesis of highly functionalized tetrasubstituted pyrroles has been reported through one-pot four-component reaction of aldehyde, amine, nitroalkane and 1,3-diketone using silica gel supported polyphosphoric acid (PPA–SiO₂) under microwave condition. The reaction occured through the in situ formation of β-keto enamine and nitrostyrene analog following Michael addition and finally intramolecular annulation affording the products in good yields. The key features of the present method include clean reaction, mild conditions, low catalyst loading, straightforward, high to excellent yields, short reaction time, avoiding use of harmful metal catalyst and organic solvent, environmentally friendly compared to the existing methods, recovery and reusability of catalyst and easy workup procedure.     

An oximate-based hexanuclear mixed-valence Mn(III)4Mn(II)2 edge-sharing bitetrahedral core with an St = 5 spin ground state

The synthesis, structures and magnetic properties of two hexanuclear Mn(6) clusters are reported: Mn(6)(mu(4)-O)(2)(dapdo)(2)(dapdoH)(4)(mu(2)-OH)(2)](ClO(4))(2).6MeCN (.6MeCN) and [Mn(6)(mu(4)-O)(2)(dapdo)(2)(dapdoH)(4)(mu(2)-OCH(3))(2)](ClO(4))(2).2Et(2)O (.2Et(2)O) [dapdo(2-) is the dianion of 2,6-diacetylpyridine dioxime and dapdoH(-) is the monoanion of the aforesaid dioxime ligand]. Both complexes are mixed-valent with two Mn(II) and four Mn(III) atoms disposed in an edge-sharing bitetrahedral core. Both complexes and display the same [Mn(III)(4)Mn(II)(2)(mu(4)-O)(2)(mu(2)-OR)(2)](10+) core in which R = H for and R = Me for . The [Mn(III)(4)Mn(II)(2)] core is rather uncommon compared to the reported [Mn(III)(2)Mn(II)(4)] core in the literature. DC magnetic susceptibility measurements on and reveal the presence of competing exchange interactions resulting in an S(t) = 5 ground spin state. The magnetic behavior of the compounds indicates antiferromagnetic coupling between the manganese(iii) centers, whereas the coupling between the manganese(iii) and manganese(ii) is weakly antiferromagnetic or ferromagnetic depending on the bridging environments. Finally the interaction between the manganese(ii) centers from the two fused tetrahedra is weakly ferromagnetic in nature stabilizing S(t) = 5 ground spin state in compounds and .     

Synthesis and formulation of self-immolative PEG-aryl azide block copolymers and click-to-release reactivity with trans-cyclooctene

Self-immolative aryl azides can react with trans-cyclooctenes (TCO), triphenylphosphines or hydrogen sulfide (H₂S) to activate prodrugs, imaging probes and drug delivery systems. To date, the synthesis of polymers containing these aryl azide self-immolative linkers and their reactivity with a strained alkene (i.e., in a bioorthogonal reaction) has not been explored. Also, due to the instability of aryl azides towards light and high temperatures, the polymerization methods compatible with aryl azides are limited. Through systematic investigation of the reversible addition-fragmentation chain transfer (RAFT) and atom transfer radical polymerization (ATRP) methods, a self-immolative PEG-aryl azide block copolymer (PEG₄₅-b-ABOC₂₈ 2 ) and a non-responsive 4-fluoroaryl block copolymer (PEG₄₅-b-FBOC₂₄ 3 ) was prepared. ATRP provided the desired polymers in a highly controlled manner, whereas the RAFT conditions led to higher levels of aryl azide polymer degradation. The ATRP derived polymers 2 and 3 were formulated into nanoparticles of approximately 200 nm diameter, and particle triggering was demonstrated by the [3+2]-cycloaddition reaction of TCO with PEG₄₅-b-ABOC₂₈ 2 in solution (pure polymer) and as a formulated nanoparticle. Preliminary in vitro cell viability studies suggested that the stimuli-responsive aryl azide polymers/nanoparticles are not cytotoxic up to 200 μg/ml concentrations.     

Towards a synthetic model of the photosynthetic water oxidizing complex: [Mn3O4(O2CMe)4(bpy)2] containing the [MnIV3(mu-O)4]4+ core

The 3 MnIV title compound has been prepared and characterized by X-ray crystallography and magnetochemistry; the complex contains a [Mn(mu-O)2Mn(mu-O)2Mn]4+ core and possesses an S = 3/2 ground state.     

Pyrazole‐4‐carboxylic Acids from Vanadium‐catalyzed Chemical Transformation of Pyrazole‐4‐carbaldehydes

The conversion of aldehydes into carboxylic acids using oxidizing agents is a common protocol in transformation chemistry. An efficient oxidation strategy of transformation of pyrazole‐4‐aldehydes to the corresponding acids using vanadium catalysts in the presence of 30% H₂O₂ as an oxidant is described. The catalytic technology was successfully applied to a range of various 4‐formylpyrazoles, and plausible mechanism is also discussed.     

A novel approach for protein identification from complex cell proteome using modified peptide mass fingerprinting algorithm

A unique peptide based search algorithm for identification of protein mixture using PMF is proposed. The proposed search algorithm utilizes binary search and heapsort programs to generate frequency chart depicting the unique peptides corresponding to all proteins in a proteome. The use of binary search program significantly reduces the time for frequency chart preparation to ～2 s for a proteome comprising ～23 000 proteins. The algorithm was applied to a three‐protein mixture identification, host cell protein (HCP) analysis, and a simulation‐generated data set. It was found that the algorithm could identify at least one unique peptide of a protein even in the presence of fourfold higher concentration of another protein. In addition, two HCPs that are known to be difficult to remove were missed by MS/MS approach and were exclusively identified using the presented algorithm. Thus, the proposed algorithm when used along with standard proteomic approaches present avenues for enhanced protein identification efficiency, particularly for applications such as HCP analysis in biopharmaceutical research, where identification of low‐abundance proteins are generally not achieved due to dynamic range limitations between the target product and HCPs.     

Nanocatalosomes as Plasmonic Bilayer Shells with Interlayer Catalytic Nanospaces for Solar‐Light‐Induced Reactions

Interest and challenges remain in designing and synthesizing catalysts with nature‐like complexity at few‐nm scale to harness unprecedented functionalities by using sustainable solar light. We introduce “nanocatalosomes”—a bio‐inspired bilayer‐vesicular design of nanoreactor with metallic bilayer shell‐in‐shell structure, having numerous controllable confined cavities within few‐nm interlayer space, customizable with different noble metals. The intershell‐confined plasmonically coupled hot‐nanospaces within the few‐nm cavities play a pivotal role in harnessing catalytic effects for various organic transformations, as demonstrated by “acceptorless dehydrogenation”, “Suzuki–Miyaura cross‐coupling” and “alkynyl annulation” affording clean conversions and turnover frequencies (TOFs) at least one order of magnitude higher than state‐of‐the‐art Au‐nanorod‐based plasmonic catalysts. This work paves the way towards next‐generation nanoreactors for chemical transformations with solar energy.